scholarly journals Production of bacterial cellulose films by Gluconoacetobacter xylinus for lipase immobilization

2021 ◽  
pp. 1-13
Author(s):  
Nguyen Thuy Kim Anh ◽  
Huynh Bao Ngan ◽  
Thai Hoang Nguyen Vu ◽  
Tran Thi Nhu Hao ◽  
Truong Thi Thu ◽  
...  
Keyword(s):  
Bacterial Cellulose ◽  
Rotational Speed ◽  
Film Formation ◽  
Static Condition ◽  
Inoculum Size ◽  
Cellulosic Biomass ◽  
Hydroxyl Groups ◽  
Pharmaceutical Chemical ◽  
Lipase Immobilization ◽  
Initial Inoculum

Bacterial cellulose (BC), a microbial polysaccharide, has chemically equivalent structure to plant cellulose with unbranched pellicle structure of only glucose monomers. Due to the unique nanostructure, BC has great potential in enzyme immobilization. In this study, the effects of different cultivation conditions including rotational speed, initial inoculum concentration and medium pH on the film-like cellulosic biomass formation of Gluconacetobacter xylinus JCM 9730 were examined. The resultant BC films were then studied for its feasibility in the immobilization of lipase, a widely used enzyme in biotechnological and industrial processes including food, pharmaceutical, chemical and paper industries. Results showed that increasing in rotational speed from 0 rpm to 200 rpm converted cellulose-producing cells to non-cellulose-producing ones, leading to a significant decline in BC film formation. The increase in initial inoculum size from 0.01 g/L to 0.1 g/L reduced sugar concentration and surface area of the medium, and therefore inhibiting the formation of film-like cellulosic biomass. In addition, the optimum pH range of Acetobacter species from 5.4 – 6.3 was found not optimal for BC film formation. The highest amount of film-like cellulosic biomass of 19.01 g/L was obtained under static condition (0 rpm) with initial cell concentration of 0.04 g/L and initial pH of 4.0. The BC film samples were then acetylated with acetic anhydride/iodine system to convert the hydroxyl groups to less hydrophilic acetyl groups and were used for lipase immobilization. Results showed that lipase immobilized on acetylated BC still maintained its lipid hydrolytic activity. It can be hence concluded that BC films produced by G. xylinus JCM 9730 were potential for lipase immobilization.

Properties and Applications of Modified Bacterial Cellulose-Based Materials

2020 ◽  
Vol 16 ◽  
Author(s):  
Munair Badshah ◽  
Hanif Ullah ◽  
Fazli Wahid ◽  
Taous Khan
Keyword(s):  
Surface Modification ◽  
Bacterial Cellulose ◽  
Degree Of Polymerization ◽  
Biomedical Science ◽  
Hydroxyl Groups ◽  
Market Demand ◽  
Ideal Candidate ◽  
Fibrous Network ◽  
Potential Applications ◽  
Surface Modification Techniques

Background: Bacterial cellulose (BC) is purest form of cellulose as it is free from pactin, lignin, hemicellulose and other active constituents associated with cellulose derived from plant sources. High biocompatibility and easy molding into desired shape make BC an ideal candidate for applications in biomedical field such as tissue engineering, wound healing and bone regeneration. In addition to this, BC has been widely studied for applications in the delivery of proteins and drugs in various forms via different routes. However, BC lacks therapeutic properties and resistance to free movement of small molecules i.e., gases and solvents. Therefore, modification of BC is required to meet the research ad market demand. Methods: We have searched the updated data relevant to as-synthesized and modified BC, properties and applications in various fields using Web of science, Science direct, Google and PubMed. Results: As-synthesized BC possesses properties such as high crystallinity, well organized fibrous network, higher degree of polymerization, and ability of being produced in swollen form. The large surface area with abundance of free accessible hydroxyl groups makes BC an ideal candidate for carrying out surface functionalization to enhance its features. The various reported surface modification techniques including, but not limited to, are amination, methylation and acetylation. Conclusion: In this review, we have highlighted various approaches made for BC surface modification. We have also reported enhancement in the properties of modified BC and potential applications in different fields ranging from biomedical science to drug delivery and paper-making to various electronic devices.

scholarly journals Lipase Immobilization in Mesoporous Silica Nanoparticles for Biofuel Production

Catalysts ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 629
Author(s):  
Aniello Costantini ◽  
Valeria Califano
Keyword(s):  
Mesoporous Silica ◽  
Silica Nanoparticles ◽  
Mechanical Stability ◽  
Mesoporous Silica Nanoparticles ◽  
Physiological Role ◽  
Biodiesel Production ◽  
Biofuel Production ◽  
Hydroxyl Groups ◽  
Lipase Immobilization ◽  
Wide Range

Lipases are ubiquitous enzymes whose physiological role is the hydrolysis of triacylglycerol into fatty acids. They are the most studied and industrially interesting enzymes, thanks to their versatility to promote a plethora of reactions on a wide range of substrates. In fact, depending on the reaction conditions, they can also catalyze synthesis reactions, such as esterification, acidolysis and transesterification. The latter is particularly important for biodiesel production. Biodiesel can be produced from animal fats or vegetable oils and is considered as a biodegradable, non-toxic and renewable energy source. The use of lipases as industrial catalysts is subordinated to their immobilization on insoluble supports, to allow multiple uses and use in continuous processes, but also to stabilize the enzyme, intrinsically prone to denaturation with consequent loss of activity. Among the materials that can be used for lipase immobilization, mesoporous silica nanoparticles represent a good choice due to the combination of thermal and mechanical stability with controlled textural characteristics. Moreover, the presence of abundant surface hydroxyl groups allows for easy chemical surface functionalization. This latter aspect has the main importance since lipases have a high affinity with hydrophobic supports. The objective of this work is to provide an overview of the recent progress of lipase immobilization in mesoporous silica nanoparticles with a focus on biodiesel production.

Production of Bacterial Cellulose from Food Industrial Waste and its Application on Natural Rubber

2021 ◽  
Vol 877 ◽  
pp. 40-45
Author(s):  
Orawan Chunhachart ◽  
Rudeerat Suntako
Keyword(s):  
Natural Rubber ◽  
Bacterial Cellulose ◽  
Sweet Corn ◽  
Static Condition ◽  
Economic Benefits ◽  
Rubber Composites ◽  
Cellulose Production ◽  
Natural Rubber Composites ◽  
Water Holding ◽  
Current Potential

Bacterial cellulose (BC) is high purity and several current potential uses in industries. Liquid byproduct of sweet corn canning process (SC) contains fermentable sugars which could be utilized to get higher economic benefits. Therefore, this research aimed to produce BC from SC by Gluconacetobacter xylinus under static condition and use it to improve mechanical properties of natural rubber. The ratio of SC to coconut juice for cellulose production was studied. The result revealed that production yield, water holding capacity and tensile strength of BC produced from the medium containing coconut juice to SC at a ratio of 75:25 (w/w) supplemented with 1% acetic acid, 1% ammonium sulfate and 5% sucrose (w/w) was not significant different from BC obtained from a coconut juice medium. The FTIR spectra of BC showed the characteristics of cellulose. The morphology of BC exhibited high fibril network. BC is showed reinforcement in natural rubber composites due to enhance the stress value, whereas reduce the strain value.

Biosurfactant production and its effects on solubilization activity of phenanthrene: a longitudinal study

2016 ◽  
Vol 74 (3) ◽  
pp. 580-585
Author(s):  
Masoumeh Golshan ◽  
Maryam Dastoorpour ◽  
Roshanak Rezaei Kalantary
Keyword(s):  
Time Course ◽  
Inoculum Size ◽  
Biosurfactant Production ◽  
Practical Application ◽  
Time Intervals ◽  
Initial Inoculum ◽  
Bacterial Inoculum ◽  
Polycyclic Aromatic ◽  
The Mean ◽  
Time Course Study

Pseudomonas facilis and Pseudomonasspp., isolated on the basis of its ability to grow on polycyclic aromatic hydrocarbon, was assayed for biosurfactant production (BP) potentials by measuring the surface tension (ST) of the culture supernatant at different time intervals. The strains in three levels of initial inoculum size (OD600 nm = 0.5, 1, 1.5) were added to medium to determine if bacterial inoculum size affects solubilization of phenanthrene (PHE).The result showed that although the two strains reduced the mean ST to less than 34.12 mN m−1 at the end of day 6, mean solubilization activity of PHE reached 77.05 mg L−1 on the sixth day. There was a significant increase in BP over time (P = 0.008); reaching its peak, 157.84 mg L−1, at the end of the sixth day. Mean solubilization activity of PHE was not significantly different for the two strains (P = 0.216). The time-course study revealed that the ST reduction and BP potential was enhanced as inoculation size increased, leading to higher PHE solubility during the incubation time. However, the trend of increase in PHE solubility was not totally in the same way to cell growth and BP. It may be suggested that more bacterial density needs to be inoculated for practical application of effective bioremediation.

scholarly journals Synthesis and biotical activity of bacterial cellulose 6-(2-phthalimidoethanesulfonate)

2020 ◽  
Vol 61 (2) ◽  
pp. 29-36
Author(s):  
Zoya P. Belousova ◽  
Keyword(s):  
Bacterial Cellulose ◽  
Side Reaction ◽  
Hydroxyl Group ◽  
Hydroxyl Groups ◽  
Cellulose Derivatives ◽  
Wound Surface ◽  
Reaction Products ◽  
Absorption Bands ◽  
Hydroxymethyl Group ◽  
Antibacterial And Antifungal

Bacterial cellulose obtained by culturing Gluconacetobacter sucrofermentans in HS environment was converted to sulfonate derivatives using methane-, toluene- and 2-phthalimidoethanesulfonic acids in pyridine. When the ratio of the starting reagents is 1 : 1, the modification of bacterial cellulose according to the primary hydroxyl group of glucopyranose fragments is most likely. The formation of 6-substituted bacterial cellulose derivatives was observed in the reaction mixture. The IR spectra of the reaction products contain absorption bands, which are specific for (O–SO2) group in the region 1377-1338 cm−1 (as), 1178-1154 cm−1 (s), fragments of the corresponding sulfonic acids, as well as free hydroxyl groups of glucopyranose in the region 3495-3382 cm−1. Bacterial cellulose 2-phthalimidoethanesulfonate was dissolved in pyridine. After drying with a desiccant in a desiccator, it turned into a dense transparent film of brown color. The increased molecular film allows to explain the side reaction occurring between the oxo group and fragments of one of the chains of modified cellulose and the non-substituted hydroxymethyl group. The IR spectrum of bacterial cellulose 6-(2-phthalimidoethanesulfonate) contains absorption bands in the region 1711 cm−1, which are specific for (Ar–CO–O) group, and absorption bands in the region 1618 cm−1, which prove the presence of (CO–NH) group. In order to impart antibiotic properties to the bacterial cellulose 6-(2-phthalimido-ethanesulfonate) film, it was physically modified with clotrimazole. The obtained experimental data showed that the films subjected to treatment with a 1% solution of clotrimazole have antibacterial and antifungal effects and prevent the growth of pathogenic microbiota on the wound surface. The exit rates of clotrimazole from the bacterial cellulose 6-(2-phthalimidoethanesulfonate) film and from the pure bacterial cellulose film differed, but only slightly. 2-Phthalimidoethanesulfonate bacterial cellulose films can be used to form composites of effective wound covering, since in addition to the unique properties of bacterial cellulose itself (low allergenicity and adhesion to the wound surface, high hygroscopicity) they will have a regenerating effect.

scholarly journals Transcrystallization of Isotactic Polypropylene/Bacterial Cellulose Hamburger Composite

Polymers ◽  
2019 ◽  
Vol 11 (3) ◽  
pp. 508 ◽  
Author(s):  
Bo Wang ◽  
Fu-hua Lin ◽  
Xiang-yang Li ◽  
Xu-ran Ji ◽  
Si-xiao Liu ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Bacterial Cellulose ◽  
Isotactic Polypropylene ◽  
Crystallization Rate ◽  
Sem Analysis ◽  
Hydroxyl Groups ◽  
Hot Press ◽  
Ft Ir ◽  
Ir Analysis ◽  
The Fourier Transform

Isotactic polypropylene (iPP) is a commonly used thermoplastic polymer with many excellent properties. But high brittleness, especially at low temperatures, limits the use of iPP. The presence of transcrystallization of iPP makes it possible for fiber-reinforced iPP composites with higher strength. Bacterial cellulose (BC) is a kind of cellulose with great potential to be used as a new filler to reinforce iPP due to its high crystallinity, biodegradability and efficient mechanical properties. In this study, the iPP/BC hamburger composite was prepared by a simple hot press and maleic anhydride grafted polypropylene (MAPP) was used to improve the interface compatibility of iPP and BC. The polarizing microscope (POM) photograph shows that BC successfully induces the transcrystallization of iPP. The differential Scanning Calorimeter (DSC) date proves that the addition of BC could improve the thermal properties and crystallization rate of the composite. Especially, this change is more obvious of the iPP/MAPP/BC. The mechanical properties of the iPP/BC composites were greatly increased. This DSC date is higher than BC; we used BC particles to enhance the iPP in our previous research. The scanning Electron Microscope (SEM) analysis intuitively shows that the interface of the iPP/MAPP/BC is more smooth and flat than the iPP/BC. The fourier Transform infrared spectroscopy (FT-IR) analysis of the iPP/BC hamburger composites was shown that a new C=O group vibration appeared at 1743 cm−1, which indicated that the hydrogen bond structure of BC molecules was weakened and some hydroxyl groups were substituted after modification which can increase the lipophilicity of BC. These results indicated that the BC fiber can easily induce the transcrystallization of iPP, which has excellent mechanical properties. Moreover, the addition of MAPP contributes greatly to the interface compatibility of iPP and BC.

scholarly journals Study of the Effect of PGDA Solvent on Film Formation and Curing Process of Two-Component Waterborne Polyurethane Coatings by FTIR Tracking

Coatings ◽  
2020 ◽  
Vol 10 (5) ◽  
pp. 461 ◽  
Author(s):  
Ruitao Wang ◽  
Chunxiang Li ◽  
Zhigang Liu ◽  
Zhongping Yao ◽  
Zhijiang Wang ◽  
...  
Keyword(s):  
Carbon Fiber ◽  
Film Formation ◽  
Waterborne Polyurethane ◽  
Hydroxyl Groups ◽  
Curing Process ◽  
Polyurethane Coating ◽  
Polyurethane Coatings ◽  
Rate Of Reaction ◽  
Two Component

Waterborne polyurethane coatings were prepared using polyhydroxyacrylate dispersion, polyisocyanate, and propylene glycol diacetate (PGDA). The rate of reaction between hydroxyl and NCO groups in film formation and curing processes was studied by FTIR. The influence of PGDA amount on film formation and curing was also studied. Results showed that PGDA content had a significant effect on the curing process. With less than 10% PGDA, the role of PGDA was more to assist diffusion of polyhydroxyacrylate and polyisocyanate resin droplets. This promoted the reaction between hydroxyl groups and NCO. With more than 10% PGDA, its effect as a solvent was more and it inhibited the reaction between hydroxyl and NCO groups. When the amount of PGDA was about 10%, the synergy between both the roles promoted the crosslinking and curing reactions. The extent of the curing reaction of NCO was more than 70% in 4 h, which was significantly higher, compared with that of about 30% without PGDA. The good applicability and appearance of the waterborne polyurethane coating prepared in this study were verified for the application to carbon fiber metro vehicles.

Sign in / Sign up

Export Citation Format

Share Document