Determination of Some Technological Properties of Camelina Sativa Seed

2018 ◽  
Vol 22 (03) ◽  
pp. 114-117
Author(s):  
Erdenedalai J ◽  
Dolgormaa B ◽  
Ganbat B ◽  
Mungun J ◽  
Lkhagvasuren L ◽  
...  
Keyword(s):  
Scientific Basis ◽  
Camelina Sativa ◽  
Technological Properties ◽  
Absolute Weight ◽  
Laboratory Conditions ◽  
Volume Weight ◽  
Geometric Size

In Mongolia, we are cultivated the profitable camelina sativa based on scientific basis, we were determined some of the characteristics of the grain seed on the laboratory conditions for define machinery and technology for sowing. Of which, we described the geometric size of seed, volume weight, absolute weight, and properties of granular and friction.

Light Side of Design: Professional Vector

2020 ◽  
pp. 23-33
Author(s):  
Elena A. Zaeva-Burdonskaya ◽  
Yuri V. Nazarov
Keyword(s):  
Professional Practice ◽  
Wide Spectrum ◽  
Scientific Basis ◽  
Design Culture ◽  
Interdisciplinary Nature ◽  
Educational Programmes ◽  
Design Activities ◽  
The Subject ◽  
Light Side

This article addresses one of the most actively developing types of design activities – light design. The article comprises quotes of the leading Russian and foreign light design specialists published over the previous five years, as well as the authors’ own conclusions. The thoughts quoted in the article are sometimes opposite to each other and reflect the wide spectrum of professional practice. They reflect the initial opinions of analysts and experts which are often diverging. All of the specialists point at the interdisciplinary nature of the new profession, which imposes additional load on a designer overloaded enough already by the scope and speed of the problems being solved nowadays. The discussion of the new profession of light designer initiated on the pages of professional publications is especially important in view of the development of professional standards and standards of design and architectural education, as well as creation of new educational programmes based on various approaches to the subject in technical and humanitarian institutions. The goal of this article is to introduce light design into the field of fully legitimate sections of design culture, to define the authentic scientific basis of the new creative profession, to initiate a foundation for self-determination of the new synthetic area, which materially affects the state of the profession as a whole and the life standards of a wide variety of consumers. In order to reach the set goal, a comparative and analytical method of study was selected, which allows studying the problem to a large extent and from all angles and finding the ways of overcoming the challenges emerging in the area of the new activity.

Science of Ahangyol and Its Importance for Modern Scientific Thought

2019 ◽  
Vol 10 (5) ◽  
pp. 473-478
Author(s):  
Ahmad Gashamoglu ◽  
Keyword(s):  
Modern Science ◽  
Scientific Basis ◽  
New Paradigm ◽  
Islamic Philosophy ◽  
Scientific Thought ◽  
Religious Books ◽  
Strategic Approach ◽  
Scientific Potential ◽  
Made In

The Article briefly discusses the need for generation of the Science of Ahangyol, and this science’s scientific basis, object and subject, category system, scientific research methods and application options. Ahangyol is a universal science and may be useful in any sphere. It may assist in problem solving in peacemaking process and in many areas such as ecology, economics, politics, culture, management and etc. This science stipulates that any activity and any decision made in the life may only and solely be successful when they comply with harmony principles more, which are the principles of existence and activity of the world. A right strategic approach of the Eastern Philosophy and the Middle Age Islamic Philosophy and scientific thought has an important potential. This strategic approach creates opportunities to also consider irrational factors in addition to rational ones comprehensively in scientific researches. The modern scientific thought contributes to implementation of these opportunities. Ahangyol is a science of determination of ways to achieve harmony in any sphere and of creation of special methods to make progress in these ways through assistance of the modern science. Methods of the System Theory, Mathematics, IT, Astronomy, Physics, Biology, Sociology, Statistics and etc. are more extensively applied. Information is given on some of these methods. Moreover, the Science of Ahangyol, which is a new philosophical worldview and a new paradigm contributes to clarification of metaphysic views considerably and discovery of the scientific potential of religious books.

Determination of cores electrification during the flow in the modified Wurster apparatus

2016 ◽  
Vol 1 (20) ◽  
pp. 5-15
Author(s):  
Wojciech Ludwig ◽  
Tadeusz Mączka
Keyword(s):  
Measurement System ◽  
Charge Accumulation ◽  
Laboratory Conditions ◽  
Pharmaceutical Materials

The purpose of this paper was presentation of the value of cores electrification during their flow in the modified Wurster apparatus, applied for dry encapsulation of pharmaceutical materials. Previous works of the authors dealt with vulnerability of the particles of different diameter, produced by SYNTAPHARM (Cellets 1000, 700 and 100) on electrification in laboratory conditions. The presented work gives the results of examination on particles electrification in real conditions of their stable circulation in a column. The measurement system, that was applied, allowed determination of electrification potential and electrification current. Those quantities, which are the measures of charge accumulation on cores were determined for several particles (Cellets 1000, 700 and 500) with the different humidity, for different mass of the bed and spouting gas velocities.

Integrative Approach in Law Understanding: the History of the Origin of Ideas and the Current State

2020 ◽  
Vol 2 (1) ◽  
pp. 115-130
Author(s):  
R. R. Palekha ◽  
Keyword(s):  
Central Place ◽  
Scientific Basis ◽  
Integrative Approach ◽  
Current State ◽  
History Of ◽  
Legal Thinking ◽  
Reliable Knowledge ◽  
The Right ◽  
Fat Formulation

Introduction. Right understanding is the most live, interesting and, at the same time, the uncertain and changeable area of researches which takes the central place as in the general theory of the right, and gains the increasing value in industry jurisprudence that is connected with its considerable teoretiko-methodological and applied potential which is shown in spheres of lawmaking and law-enforcement activity. Thus, right understanding represents research tools of the subject of knowledge which allow to study all range legal and, the based on them, state phenomena for the purpose of obtaining reliable knowledge of state and legal reality. In this regard integrative approach in right understanding which has rich history of the formation and development is of special interest, allows to perceive the right as integrally complete phenomenon, as much as possible retrieves its regulatory abilities and, provides achievement of criteria of scientific research: comprehensiveness, objectivity, historicism. Materials and Methods. In article an attempt of the analysis of integrative approach in right understanding from a position of history of origin of his ideas and assessment of the current state is made. A result of studying of scientific literature, generalization and comparison of the different points of view fat formulation of author’s determination of category “right understanding” and submission of the evidence-based integrative theory of right understanding which as much as possible conforms to requirements of time and has essential regulatory and guarding potential. Results. In article the category right understanding is comprehensively considered, different integrative theories of right understanding from a position of their origin and development are submitted, the value of modern integrative approach in right understanding is shown, perspectives of its further development are evaluated. Discussion and Conclusion. The author comes to the conclusion about the theoretical and methodological consistency and inevitability of the integrative approach in law understanding, which acts as a scientifically grounded type of legal thinking capable of comprehending the law on a truly scientific basis.

scholarly journals Evaluation of Usefulness of the Designed Laboratory Photobioreactor for Microalgae Cultivation in Controlled Conditions

2016 ◽  
Vol 20 (1) ◽  
pp. 13-22
Author(s):  
Beata Brzychczyk ◽  
Zbigniew Kowalczyk ◽  
Jan Giełżecki
Keyword(s):  
Culture Medium ◽  
Dry Mass ◽  
Biomass Growth ◽  
Microalgae Cultivation ◽  
Freshwater Microalgae ◽  
Laboratory Conditions ◽  
Medium Concentration ◽  
Controlled Conditions ◽  
The Impact

AbstractThe objective of the paper was to analyse the use of the designed photobioreactor for freshwater microalgae cultivation in the controlled laboratory conditions. The work covered the design and construction of photobioreactors (PBR) and setting up comparative cultivations of freshwater microalgae chlorelli vulgaris along with determination of the biomass growth intensity for a varied amount of supplied culture medium. It was found out that the constructed PBR may be used for microalgae cultivation in the controlled conditions. The impact of the culture medium amount on the growth of chlorelli vulgaris was proved. As a result of the increase of culture medium concentration to 30.1-120.4 ml·l−1 of water, dry mass in photobioreactorsincreased respectively from 1.33 g·dm−3 to 4.68 g·dm−3.

About the possibility of identification of articles from steels, aluminum, copper and alloys on their basis on the expanded micro-impurity elemental composition

2021 ◽  
pp. 51-56
Author(s):  
Yu. B. Sazonov ◽  
D. Yu. Ozherelkov ◽  
R. Sh. Latypov ◽  
E. E. Gorshkov
Keyword(s):  
Spectral Analysis ◽  
Chemical Composition ◽  
Elemental Composition ◽  
Chemical Elements ◽  
Copper Alloys ◽  
Minimal Amount ◽  
Elementary Composition ◽  
Geometric Size ◽  
The Common

Possibility of determination of the fragments and articles made of different grades of steel aluminium and copper alloys and their affiliation to the common melt was examined via the methods of photoelectric spectral analysis based on composition of micro-impurities. Chemical elements with micro-impurities were revealed; they allow to determine affiliation of metal fragments to one melt. Ultimately possible deviations of micro-impurities within one melt were obtained. The technique allowing to establish affiliation of fragments to the common melt based on their elementary composition of micro-impurities with minimal amount of measurements was suggested based on the obtained results. The minimal geometric size of a sample available for analysis was determined; it allows to classify the examined fragments to one melt based on the results of investigation of expanded elementary composition of micro-impurities. Practical opportunities of this technique were displayed on the example of the alloys with different chemical composition.

scholarly journals Influence of nitrogen dioxide and acetylene on marbles, ceramics and pigment

2013 ◽  
Vol 10 (2) ◽  
pp. 183-191
Keyword(s):  
Air Pollution ◽  
Nitrogen Dioxide ◽  
Synergistic Effects ◽  
Scientific Basis ◽  
Solid Surfaces ◽  
Reversed Flow ◽  
The Social ◽  
Tio2 Pigment ◽  
Adsorption Quantity

The air pollution has a great impact on the social and economic aspects all over the world. Thus, the interaction of materials with the atmosphere has received increased attention nowadays. In order to estimate the impacts of air pollution on the solid surfaces a suitable scientific basis is developed and the well known Reversed Flow - Inverse Gas Chromatography, RF- IGC, is used. This dynamic experimental technique leads to very interesting experimental results through the determination of some important physicochemical quantities. The solids studied were Pentelic marble, white TiO2 pigment, ceramic and the gases were NO2 and C2H2. The synergistic effects between acetylene and nitrogen dioxide were also investigated. Through the curves obtained for each adsorption quantity determined versus time, one can easily and accurately conclude the result of the pollution impact on every solid mentioned above. The surface topography and the mechanism of deterioration can also be studied. All the above answer in detail to the questions of where, when and how the influence of gas pollutants on materials of cultural heritage takes place.

Sign in / Sign up

Export Citation Format

Share Document