EVALUATION OF MG-25 FUSE QUALITY AT LIFE CYCLE AND IDENTIFICATION OF OCCURRING FAULTS

2020 ◽  
Vol 154 (2) ◽  
pp. 21-41
Author(s):  
Henryk Terenowski ◽  
Bogdan Krysiński
Keyword(s):  
Life Cycle ◽  
Test Results ◽  
Technical Status ◽  
Quantitative Contribution

The paper presents an analysis of faults of MG-25 fuse which affect the efficiency of this article in the life cycle and were detected at testing its technical status. The analysis was made on the grounds of test results [1] received for production lots of MG-25 fuses from years 1970-2000. The quantitative contribution of particular faults affecting the quality of this article was illustrated by Pareto-Lorenz method.

scholarly journals A MODEL FOR MANAGING LOGISTICS COSTS THROUGHOUT A PRODUCT’S LIFE CYCLE: A CASE STUDY OF A MULTINATIONAL MANUFACTURING COMPANY

Transport ◽  
2019 ◽  
Vol 34 (5) ◽  
pp. 517-528
Author(s):  
Sebastjan Škerlič ◽  
Edgar Sokolovskij
Keyword(s):  
Life Cycle ◽  
Business Processes ◽  
Early Stage ◽  
Test Results ◽  
Practical Tool ◽  
The Cost ◽  
Cost Components

The goal of the study is to develop a model that focuses on managing logistics costs at all stages of a product’s life cycle. The model includes several different cost components and provides a wider coverage of individual processes, as logistics costs are present in different areas of a company’s operations. The applicability of the proposed method was tested in a multinational company that manufactures furniture fittings on a randomly selected product. The test results provide a theoretical and practical confirmation of the necessity to manage the logistics costs for an individual product, since other models are focused exclusively on the cost optimisation of individual logistics processes. The model therefore complements the existing knowledge and represents a practical tool for logistics professionals that enables more efficient logistics costs planning at an early stage in the development of a product, which can result in the long-term reduction in the total costs of logistics and improve the quality of business processes.

Implementasi Voip Server Berbasis IPV6 Dengan Raspberry PI

2019 ◽  
Vol 9 (01) ◽  
pp. 47-54
Author(s):  
Rabbai San Arif ◽  
Yuli Fitrisia ◽  
Agus Urip Ari Wibowo
Keyword(s):  
Internet Protocol ◽  
Wireless Transmission ◽  
Raspberry Pi ◽  
Test Results ◽  
Average Delay ◽  
Ipv6 Network ◽  
Ip Network ◽  
Selection Of ◽  
Better Than

Voice over Internet Protocol (VoIP) is a telecommunications technology that is able to pass the communication service in Internet Protocol networks so as to allow communicating between users in an IP network. However VoIP technology still has weakness in the Quality of Service (QoS). VOPI weaknesses is affected by the selection of the physical servers used. In this research, VoIP is configured on Linux operating system with Asterisk as VoIP application server and integrated on a Raspberry Pi by using wired and wireless network as the transmission medium. Because of depletion of IPv4 capacity that can be used on the network, it needs to be applied to VoIP system using the IPv6 network protocol with supports devices. The test results by using a wired transmission medium that has obtained are the average delay is 117.851 ms, jitter is 5.796 ms, packet loss is 0.38%, throughput is 962.861 kbps, 8.33% of CPU usage and 59.33% of memory usage. The analysis shows that the wired transmission media is better than the wireless transmission media and wireless-wired.

Construction Control As A Strategy For Improving The Quality Of Buildings And Structures

2020 ◽  
Keyword(s):  
Quality Control ◽  
Life Cycle ◽  
Construction Control ◽  
Construction Sites ◽  
Actual Problem ◽  
Construction Market ◽  
Construction Products ◽  
Underlying Causes ◽  
Required Quality

In construction production, the safety of constructing buildings and structures is achieved by ensuring the required quality as a result of systematic construction control based on the implementation of a complex of technical, economic and organizational measures at all stages of the object's life cycle. The article deals with the actual problem of improving the quality of construction products-buildings and structures in conjunction with the activities of construction control bodies. The article presents the advanced foreign and domestic experience of ensuring the quality control at the construction sites, providing for the prevention of the underlying causes of defects and increasing the interest of the contractors directly. On the basis of the analysis of the current situation with quality control at the construction market, ways to improve its efficiency by developing a unified system of technological implementation of relevant requirements for the quality of construction products, determining the rational number and business load of construction control engineers, as well as the active activities of self-regulatory organizations in this area are offered.

Проблемы оценки качества при проектировании транспортных услуг

2020 ◽  
pp. 30-40
Author(s):  
S.U. Lyapina ◽  
◽  
V.N. Tarasova ◽  
V.B. Ruchkin ◽  
E.O. Koscheeva ◽  
...  
Keyword(s):  
Life Cycle ◽  
Business Processes ◽  
Service Industries ◽  
Service Organizations ◽  
Quality Of Services ◽  
Market Failures ◽  
Expert Opinions ◽  
Service Life Cycle ◽  
Quantitative Indicators

The quality issues of new services directly affect the competitiveness of service organizations. However, the introduction of new services to the market is often limited only to the construction of the logistics of business processes, and the design applies only to technological equipment and infrastructure, the quality of which ultimately does not always ensure the quality of the services provided. At the same time, quality management affects mainly operational aspects, that is, it covers the later stages of the service life cycle. In resource-intensive service industries (for example, transport, communications, etc.), the high cost of equipment and infrastructure reduces the possibility of changes in service delivery technologies to improve their quality, which leads to inefficiency and market failures due to the fact that the new service does not match the real needs of customers. Despite this, forecasting and planning the quality of a service at the stage «making a decision» to launch a new service on the market remains largely without sufficient attention. The authors prove the need to design the quality of services at the stage «making a decision» to bring new services to the market. The purpose of the article is to describe the approach developed by the authors to assessing the quality of projected services at the early stages of their life cycle, which makes it possible to integrate qualitative and quantitative indicators of the future service and take into account the forecast requests of customers. The proposed approach has two features: (1) forecasting customer requirements for the quality of services is based on the results of machine learning based on data on existing and potential customers, as well as on the basis of the accumulated knowledge base of customer experience and expert opinions; (2) multi-criteria optimization is used, while some of the optimized parameters are discrete and high-quality. In conclusion, the authors demonstrated the advantages of the developed model on the examples of transport and logistics business in the field of passenger and freight transportation in Russia.

Computable metrics of personal performance in software development teams

2019 ◽  
Author(s):  
Andriy Lishchytovych ◽  
Volodymyr Pavlenko
Keyword(s):  
Life Cycle ◽  
Software Development ◽  
Product Quality ◽  
Performance Indicators ◽  
Key Performance Indicators ◽  
Project Manager ◽  
Development Life Cycle ◽  
Software Product ◽  
Software Development Life Cycle

The present article describes setup, configuration and usage of the key performance indicators (KPIs) of members of project teams involved into the software development life cycle. Key performance indicators are described for the full software development life cycle and imply the deep integration with both task tracking systems and project code management systems, as well as a software product quality testing system. To illustrate, we used the extremely popular products - Atlassian Jira (tracking development tasks and bugs tracking system) and git (code management system). The calculation of key performance indicators is given for a team of three developers, two testing engineers responsible for product quality, one designer, one system administrator, one product manager (responsible for setting business requirements) and one project manager. For the key members of the team, it is suggested to use one integral key performance indicator per the role / team member, which reflects the quality of the fulfillment of the corresponding role of the tasks. The model of performance indicators is inverse positive - the initial value of each of the indicators is zero and increases in the case of certain deviations from the standard performance of official duties inherent in a particular role. The calculation of the proposed key performance indicators can be fully automated (in particular, using Atlassian Jira and Atlassian Bitbucket (git) or any other systems, like Redmine, GitLab or TestLink), which eliminates the human factor and, after the automation, does not require any additional effort to calculate. Using such a tool as the key performance indicators allows project managers to completely eliminate bias, reduce the emotional component and provide objective data for the project manager. The described key performance indicators can be used to reduce the time required to resolve conflicts in the team, increase productivity and improve the quality of the software product.

Sinonasal effects of external dacryocystorhinostomy

2021 ◽  
pp. 1-4
Author(s):  
H Eyigor ◽  
E A Cetinkaya ◽  
D T Coban ◽  
G Ozturk ◽  
Ö Erdem
Keyword(s):  
Mucociliary Clearance ◽  
Nasal Symptom ◽  
Ciliary Activity ◽  
Test Results ◽  
Saccharine Test ◽  
Significant Difference ◽  
Symptom Scores ◽  
Endoscopic Score ◽  
External Dacryocystorhinostomy

Abstract Objective External dacryocystorhinostomy is thought to cause mucociliary dysfunction by damaging the mucosa, in turn affecting ciliary activity and mucus quality. This study investigated the effect of external dacryocystorhinostomy on sinonasal function. Methods Patients scheduled for unilateral external dacryocystorhinostomy who underwent endoscopic nasal examination and paranasal sinus computed tomography were included in this study. A saccharine test was performed on the planned surgical side and the mucociliary clearance time was determined. The sinonasal quality of life was measured in all patients, pre-operatively and at six months post-operatively, using the Sino-Nasal Outcome Test-22. The Lund–Kennedy endoscopic score was also determined in all patients, both pre- and post-operatively. Results The study comprised 28 patients (22 females and 6 males). A statistically significant difference was found between the pre- and post-operative saccharine test results (p = 0.006), but not between the pre- and post-operative Sino-Nasal Outcome Test-22 scores (p > 0.05). Conclusion This study is one of only a few to investigate the effect of external dacryocystorhinostomy on sinonasal function. The results showed that external dacryocystorhinostomy impairs mucociliary clearance. The surgical procedure is well tolerated and does not significantly change nasal symptom scores.

An improved nonlinear model considering relative velocity for the friction behavior between untwisted glass-fiber tow and roller

2021 ◽  
pp. 004051752110308
Author(s):  
Yang Liu ◽  
Zhong Xiang ◽  
Xiangqin Zhou ◽  
Zhenyu Wu ◽  
Xudong Hu
Keyword(s):  
Friction Coefficient ◽  
Glass Fiber ◽  
Relative Velocity ◽  
Friction Model ◽  
Woven Fabric ◽  
Test Results ◽  
Application Process ◽  
Friction Behavior ◽  
Improved Model

Friction between the tow and tool surface normally happens during the tow production, fabric weaving, and application process and has an important influence on the quality of the woven fabric. Based on this fact, this paper studied the influence of tension and relative velocity on the three kinds of untwisted-glass-fiber tow-on-roller friction with a Capstan-based test setup. Furthermore, an improved nonlinear friction model taking both tension and velocity into account was proposed. According to statistical test results, firstly, the friction coefficient was found to be positively correlated with tension and relative velocity. Secondly, tension and velocity were complementary on the tow-on-roller friction behavior, with neither being superior to the other. Thirdly, an improved model was found to present well the nonlinear characteristics between friction coefficient and tension and velocity, and predicational results of the model were found to agree well with the observations from Capstan tests.

scholarly journals Do Guidelines for the Diagnosis and Monitoring of Diabetes Mellitus Fulfill the Criteria of Evidence-Based Guideline Development?

2008 ◽  
Vol 54 (11) ◽  
pp. 1872-1882 ◽  
Author(s):  
Eva Nagy ◽  
Joseph Watine ◽  
Peter S Bunting ◽  
Rita Onody ◽  
Wytze P Oosterhuis ◽  
...  
Keyword(s):  
Diabetes Mellitus ◽  
Methodological Quality ◽  
Guideline Development ◽  
Evidence Based ◽  
Test Results ◽  
Time Period ◽  
Therapeutic Guidelines ◽  
Therapeutic Recommendations ◽  
Evidence Based Guideline

Abstract Background: Although the methodological quality of therapeutic guidelines (GLs) has been criticized, little is known regarding the quality of GLs that make diagnostic recommendations. Therefore, we assessed the methodological quality of GLs providing diagnostic recommendations for managing diabetes mellitus (DM) and explored several reasons for differences in quality across these GLs. Methods: After systematic searches of published and electronic resources dated between 1999 and 2007, 26 DM GLs, published in English, were selected and scored for methodological quality using the AGREE Instrument. Subgroup analyses were performed based on the source, scope, length, origin, and date and type of publication of GLs. Using a checklist, we collected laboratory-specific items within GLs thought to be important for interpretation of test results. Results: The 26 diagnostic GLs had significant shortcomings in methodological quality according to the AGREE criteria. GLs from agencies that had clear procedures for GL development, were longer than 50 pages, or were published in electronic databases were of higher quality. Diagnostic GLs contained more preanalytical or analytical information than combined (i.e., diagnostic and therapeutic) recommendations, but the overall quality was not significantly different. The quality of GLs did not show much improvement over the time period investigated. Conclusions: The methodological shortcomings of diagnostic GLs in DM raise questions regarding the validity of recommendations in these documents that may affect their implementation in practice. Our results suggest the need for standardization of GL terminology and for higher-quality, systematically developed recommendations based on explicit guideline development and reporting standards in laboratory medicine.

Sign in / Sign up

Export Citation Format

Share Document