Investigation of Energetic Parameters of Oscillating Synchronous Pulsating Current Motors

1970 ◽  
Vol 110 (4) ◽  
pp. 17-20 ◽  
Author(s):  
L. Urmoniene ◽  
S. Gecys ◽  
E. Guseinoviene ◽  
V. Cirtautas
Keyword(s):  
Mathematical Model ◽  
Differential Equations ◽  
Matlab Software ◽  
Pulsating Current

This paper deals with oscillating linear synchronous pulsating current motor compressor drive supplied by sinusoidal and rectangular voltage. While creating mathematical model of the motor for investigation, Matlab software was used for solving of differential equations. Modeling results while supplying motor by sinusoidal and rectangular voltage and changing firing angle a of thyristor, frequency of voltage f and a load R. Characteristics and energetic parameters of oscillating linear pulsating current motor were obtained and analyzed. Ill. 10, bibl. 6, tabl. 2 (in English; abstracts in English and Lithuanian).http://dx.doi.org/10.5755/j01.eee.110.4.278

scholarly journals Evaluation of the possibility of using simulation modeling to predict the ferroresonance process in electrical networks.

2020 ◽  
Vol 11 (7-2020) ◽  
pp. 86-92
Author(s):  
Ivan N. Morozov ◽  
◽  
Semen M. Kudryashov ◽  
Keyword(s):  
Mathematical Model ◽  
Differential Equations ◽  
Simulation Modeling ◽  
Software Package ◽  
Power Transformer ◽  
Electrical Networks ◽  
System Of Differential Equations ◽  
Matlab Software ◽  
Modeling Environment ◽  
Three Phase

The article presents the results of assessing the possibility of using simulation modeling to predict the ferroresonant process in electrical networks. A mathematical model of a three-phase power transformer in the form of a system of differential equations is considered. The MatLab software package was chosen as the modeling environment. In the conclusion of the work, the results of simulation were analyzed and the correspondingconclusions were drawn.

Glycemia monitoring

1998 ◽  
Vol 2 ◽  
pp. 23-30
Author(s):  
Igor Basov ◽  
Donatas Švitra
Keyword(s):  
Diabetes Mellitus ◽  
Mathematical Model ◽  
Numerical Methods ◽  
Differential Equations ◽  
Blood Sugar ◽  
Self Regulation ◽  
Physiological System ◽  
Non Linear ◽  
The Mathematical Model

Here a system of two non-linear difference-differential equations, which is mathematical model of self-regulation of the sugar level in blood, is investigated. The analysis carried out by qualitative and numerical methods allows us to conclude that the mathematical model explains the functioning of the physiological system "insulin-blood sugar" in both normal and pathological cases, i.e. diabetes mellitus and hyperinsulinism.

Research on Generator Excitation Parameter Identification - PSS Low-Pass Link Parameter Identification

2013 ◽  
Vol 805-806 ◽  
pp. 716-720
Author(s):  
Tao Xu ◽  
Tian Long Shao ◽  
Dong Fang Zhang
Keyword(s):  
Mathematical Model ◽  
Parameter Identification ◽  
Least Squares Method ◽  
Least Square Method ◽  
Least Square ◽  
National Standards ◽  
Matlab Software ◽  
Low Pass ◽  
Newton Iterations ◽  
The Mathematical Model

Combined with the contents of the study-PSS low-pass link parameter identification. Least-squares method is selected. Using least-square method for PSS low-pass link mathematical model are also deduced. For the results, because of the mathematical model is solving nonlinear equations, cannot used by the Newton method directly. So we choose to use Newton iterations, with this feature, choose to use MATLAB software to solve the equation. Identification of the use of MATLAB software lags after the PSS parameters obtained recognition results compared with national standards, identifying and verifying the practicability.

scholarly journals Ultrasonic Waves in Bubbly Liquids: An Analytic Approach

Mathematics ◽  
2021 ◽  
Vol 9 (11) ◽  
pp. 1309
Author(s):  
P. R. Gordoa ◽  
A. Pickering
Keyword(s):  
Mathematical Model ◽  
Partial Differential Equations ◽  
Differential Equations ◽  
Acoustic Waves ◽  
Elliptic Functions ◽  
Coupled System ◽  
Ultrasonic Waves ◽  
Partial Differential ◽  
Special Cases ◽  
Spherical Bubbles

We consider the problem of the propagation of high-intensity acoustic waves in a bubble layer consisting of spherical bubbles of identical size with a uniform distribution. The mathematical model is a coupled system of partial differential equations for the acoustic pressure and the instantaneous radius of the bubbles consisting of the wave equation coupled with the Rayleigh–Plesset equation. We perform an analytic analysis based on the study of Lie symmetries for this system of equations, concentrating our attention on the traveling wave case. We then consider mappings of the resulting reductions onto equations defining elliptic functions, and special cases thereof, for example, solvable in terms of hyperbolic functions. In this way, we construct exact solutions of the system of partial differential equations under consideration. We believe this to be the first analytic study of this particular mathematical model.

Mathematical model implementation in conditions of uncertainty and possible risks

2021 ◽  
pp. 137-145
Author(s):  
A. Kravtsov ◽  
◽  
D. Levkin ◽  
O. Makarov ◽  
◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Mathematical Model ◽  
Differential Equations ◽  
Boundary Value Problem ◽  
Boundary Value Problems ◽  
Layer Structure ◽  
Boundary Value ◽  
Goal Function ◽  
Cauchy Problems ◽  
System Of Differential Equations

The article presents the theoretical and methodological principles for forecasting and mathematical modeling of possible risks in technological and biotechnological systems. The authors investigated in details the possible approach to the calculation of the goal function and its parameters. Considerable attention is paid to substantiating the correctness of boundary value problems and Cauchy problems. In mechanics, engineering, and biology, Cauchy problems and boundary value problems of differential equations are used to model physical processes. It is important that differential equations have a single physically sound solution. The authors of this article investigate the specific features of boundary value problems and Cauchy problems with boundary conditions in a two-point medium, and determine the conditions for the correctness of such problems in the spaces of power growth functions. The theory of pseudo-differential operators in the space of generalized functions was used to prove the correctness of boundary value problems. The application of the obtained results will make it possible to guarantee the correctness of mathematical models built in conditions of uncertainty and possible risks. As an example of a computational mathematical model that describes the state of the studied object of non-standard shape, the authors considered the boundary value problem of the system of differential equations of thermal conductivity for the embryo under the action of a laser beam. For such a boundary value problem, it is impossible to guarantee the existence and uniqueness of the solution of the system of differential equations. To be sure of the existence of a single solution, it is necessary either not to take into account the three-layer structure of the microbiological object, or to determine the conditions for the correctness of the boundary value problem. Applying the results obtained by the authors, the correctness of the boundary value problem of systems of differential equations of thermal conductivity for the embryo is proved taking into account the three-layer structure of the microbiological object. This makes it possible to increase the accuracy and speed of its implementation on the computer. Key words: forecasting, risk, correctness, boundary value problems, conditions of uncertainty

DIFFERENTIAL EQUATIONS FOR TRAIN STARTING WITH ELASTIC CONNECTIONS

2021 ◽  
Vol 2 ◽  
pp. 18-26
Author(s):  
I.P. POPOV
Keyword(s):  
Mathematical Model ◽  
Differential Equations ◽  
Friction Force ◽  
Static Friction ◽  
Longitudinal Vibrations ◽  
Maximum Tension ◽  
Inert Mass ◽  
The Moment ◽  
Elastic Couplings ◽  
Selection Of

The starting mode for the train is the most difficult. An effective method of pulling is the selection of coupling clearances. In this case, the cars are set in motion sequentially and the inert mass, as well as the static friction force immediately at the moment of starting, are minimal. This method has two significant drawbacks - a small fixed value of the gaps in the couplings and the shock nature of the impulse transfer. These disadvantages can be avoided by using elastically deformable couplings. The aim of this work is to construct a mathematical model of "easy" starting of a train with elastic couplings. The softening of the train start-off mode is essentially due to the replacement of the simultaneous start-off of the sections with alternate ones. To exclude longitudinal vibrations of the composition, after reaching the maximum tension of the coupling, the possibility of its harmonic compression should be mechanically blocked.

Design of Digital Filter Based on Numerical Simulation

2014 ◽  
Vol 539 ◽  
pp. 79-83
Author(s):  
Chuan Ting Wei ◽  
Quan Li Ning ◽  
Dong Chen
Keyword(s):  
Numerical Simulation ◽  
Mathematical Model ◽  
Digital Filter ◽  
Sampling Frequency ◽  
New Wave ◽  
Matlab Software ◽  
Frequency Wave

In MATLAB software, it has FDATool toolbox, which can design digital filter specific according to specific circuit, and analyze the performance of the filter according to the parameters of filter. In this paper we establish simulation mathematical model of digital filter based on the calculation principle of distributed multiplication accumulator. According to the logic algorithm we design delay algorithm of digital filter, and use MATLAB software to do simulation on amplitude frequency and phase frequency of digital filter. After superposition of different sampling frequency wave we get new waveform, and realize the digital filter for the new wave. It proves the availability of mathematical model and the program, and provides the technical reference for the design of digital filter.

scholarly journals Memory effects on the proliferative function in the cycle-specific of chemotherapy

2021 ◽  
Author(s):  
Najma Ahmed ◽  
Dumitru Vieru ◽  
Fiazud Din Zaman
Keyword(s):  
Mathematical Model ◽  
Differential Equations ◽  
Fractional Differential Equations ◽  
Numerical Solutions ◽  
Classical Model ◽  
Cell Mass ◽  
Time Derivative ◽  
Fractional Model ◽  
Fractional Differential ◽  
Mathcad Software

A generalized mathematical model of the breast and ovarian cancer is developed by considering the fractional differential equations with Caputo time-fractional derivatives. The use of the fractional model shows that the time-evolution of the proliferating cell mass, the quiescent cell mass, and the proliferative function are significantly influenced by their history. Even if the classical model, based on the derivative of integer order has been studied in many papers, its analytical solutions are presented in order to make the comparison between the classical model and the fractional model. Using the finite difference method, numerical schemes to the Caputo derivative operator and Riemann-Liouville fractional integral operator are obtained. Numerical solutions to the fractional differential equations of the generalized mathematical model are determined for the chemotherapy scheme based on the function of "on-off" type. Numerical results, obtained with the Mathcad software, are discussed and presented in graphical illustrations. The presence of the fractional order of the time-derivative as a parameter of solutions gives important information regarding the proliferative function, therefore, could give the possible rules for more efficient chemotherapy.

scholarly journals Mathematical modeling and algorithm for calculation of thermocatalytic process of producing nanomaterial

2021 ◽  
Vol 23 (3) ◽  
pp. 1590
Author(s):  
Bakhtiyar Ismailov ◽  
Zhanat Umarova ◽  
Khairulla Ismailov ◽  
Aibarsha Dosmakanbetova ◽  
Saule Meldebekova
Keyword(s):  
Mathematical Model ◽  
Differential Equations ◽  
Solid Phase ◽  
Nonlinear Effects ◽  
Operating Characteristics ◽  
Laplace Transform Method ◽  
Transform Method ◽  
Wide Range ◽  
The Laplace Transform ◽  
Complex Mathematical Model

<p>At present, when constructing a mathematical description of the pyrolysis reactor, partial differential equations for the components of the gas phase and the catalyst phase are used. In the well-known works on modeling pyrolysis, the obtained models are applicable only for a narrow range of changes in the process parameters, the geometric dimensions are considered constant. The article poses the task of creating a complex mathematical model with additional terms, taking into account nonlinear effects, where the geometric dimensions of the apparatus and operating characteristics vary over a wide range. An analytical method has been developed for the implementation of a mathematical model of catalytic pyrolysis of methane for the production of nanomaterials in a continuous mode. The differential equation for gaseous components with initial and boundary conditions of the third type is reduced to a dimensionless form with a small value of the peclet criterion with a form factor. It is shown that the laplace transform method is mainly suitable for this case, which is applicable both for differential equations for solid-phase components and calculation in a periodic mode. The adequacy of the model results with the known experimental data is checked.</p>

Center-Focus Problem for Discontinuous Planar Differential Equations

2003 ◽  
Vol 13 (07) ◽  
pp. 1755-1765 ◽  
Author(s):  
Armengol Gasull ◽  
Joan Torregrosa
Keyword(s):  
Mathematical Model ◽  
Differential Equations ◽  
Ordinary Differential Equations ◽  
Critical Point ◽  
Limit Cycles ◽  
New Method ◽  
Polar Coordinates ◽  
Mechanical Problem ◽  
Weak Focus ◽  
Elastic Walls

We study the center-focus problem as well as the number of limit cycles which bifurcate from a weak focus for several families of planar discontinuous ordinary differential equations. Our computations of the return map near the critical point are performed with a new method based on a suitable decomposition of certain one-forms associated with the expression of the system in polar coordinates. This decomposition simplifies all the expressions involved in the procedure. Finally, we apply our results to study a mathematical model of a mechanical problem, the movement of a ball between two elastic walls.

Sign in / Sign up

Export Citation Format

Share Document