scholarly journals Effects of Biodiesel Blends Varied by Cetane Numbers and Oxygen Contents on Stationary Diesel Engine Performance and Exhaust Emissions

2020 ◽  
Author(s):  
Semakula Maroa ◽  
Freddie Inambao
Keyword(s):  
Engine Performance ◽  
Emission Characteristics ◽  
Pyrolysis Oil ◽  
Mixing Ratio ◽  
Waste Plastic ◽  
Performance And Emission ◽  
Mixing Ratios ◽  
Blended Fuel ◽  
Reduce Emissions ◽  
And Performance

This work investigated waste plastic pyrolysis oil (WPPO), 2-ethyl hexyl nitrate (EHN), and ethanol as sources of renewable energy, blending conventional diesel (CD), WPPO, and ethanol with EHN was to improve the combustion and performance characteristics of the WPPO blends. EHN has the potential to reduce emissions of CO, CO2, UHC, NOX, and PM. Ethanol improves viscosity, miscibility, and the oxygen content of WPPO. Mixing ratios were 50/WPPO25/E25, 60/WPPO20/E20, 70/WPPO15/E15, 80/WPPO10/E10, and 90/WPPO5/E5 for CD, waste plastic pyrolysis oil, and ethanol, respectively. The mixing ratio of EHN (0.01%) was based on the total quantity of blended fuel. Performance and emission characteristics of a stationary 4-cylinder water-cooled diesel Iveco power generator were evaluated with ASTM standards. At 1000 rpm, the BSFC was 0.043 kg/kWh compared to CD at 0.04 kg/kWh. Blend 90/WPPO5/E5 had the highest value of 14% for BTE, while the NOX emissions for 90/WPPO5/E5, 80/WPPO10/E10, and 70/WPPO15/E15 were 384, 395, and 414 ppm, respectively, compared to CD fuel at 424 ppm. This is due to their densities of 792 kg/m3, 825 kg/m3 which are close to CD fuel at 845 kg/m3 and the additive EHN. These results show blends of WPPO, ethanol and EHN reduce emissions, and improve engine performance, mimicking CD fuel.

Synthesis and Performance Evaluation of Fuel from Waste Plastics

2021 ◽  
Vol 13 (3) ◽  
Author(s):  
D. Gowrishankar ◽  
G.D. Kumar ◽  
R. Prithviraj ◽  
V. Sanjay ◽  
D. Hariharan ◽  
...  
Keyword(s):  
Diesel Fuel ◽  
Engine Performance ◽  
Pyrolysis Oil ◽  
Waste Plastics ◽  
Waste Plastic ◽  
Decomposition Of Organic Matter ◽  
Performance And Emissions ◽  
And Performance ◽  
Blend Ratios ◽  
Alternate Fuels

Plastics are an integral part of our lives and the production of plastics has drastically increased over the years, because of its vast range of applications and usage. Due to this the accumulation of waste plastics has also increased in time. The waste plastic generated in India is 15000 tons per day (as per survey). The breakdown of plastics requires around 500 years in the earth and these waste plastics affect the humans, animals, birds, earth and environment. The demand for conventional fuel has also increased lately and the quantity of this fuel reserve has decreased simultaneously. The extensive usage of the conventional fuels has paved the path for alternative ways for energy sources and alternate fuels. The extraction of waste plastic oil is obtained by the process of pyrolysis which is nothing but the thermochemical decomposition of organic matter without oxygen. The extracted plastic pyrolysis oil is then blended with diesel which helps in reducing the consumption of diesel fuel. Different blend ratios are prepared consisting of the extracted waste plastic pyrolysis oil and diesel fuel. These fuels are tested in the engine to understand the variation in the engine performance and emissions with the help of a gas analyser. By this way, the suitable blend ratio is selected for further works. This blend of fuel can exhibit high thermal efficiency and increases machine efficiency. The fuel does not emit sulphur dioxide (SO2) and the residue obtained is only 5 percent which is said to be carbon.

Effect of addition of plastic pyrolytic oil and waste cooking oil biodiesel in palm oil biodiesel–commercial diesel blends on diesel engine performance, emission, and lubricity

2021 ◽  
pp. 0958305X2110348
Author(s):  
Muhamad SN Awang ◽  
Nurin WM Zulkifli ◽  
Muhammad M Abbas ◽  
Syahir A Zulkifli ◽  
Mohd NAM Yusoff ◽  
...  
Keyword(s):  
Diesel Engine ◽  
Palm Oil ◽  
Engine Performance ◽  
Fuel Mixture ◽  
Waste Cooking Oil ◽  
Pyrolysis Oil ◽  
Waste Plastic ◽  
Performance And Emission ◽  
Cooking Oil ◽  
Palm Oil Biodiesel

The main purposes of this research were to study the diesel engines' performance and emission characteristics of quaternary fuels, as well as to analyze their tribological properties. The quaternary comprised waste plastic pyrolysis oil, waste cooking oil biodiesel, palm oil biodiesel, and commercial diesel. Their compositions were analyzed by gas chromatography and mass spectrometry. By using mechanical stirring, four quaternary fuels with different compositions were prepared. Because Malaysia is expected to implement B30 (30% palm oil biodiesel content in diesel) in 2025, B30a (30% palm oil biodiesel and 70% commercial diesel) mixture was prepared as a reference fuel. In total, 5%, 10%, and 15% of each waste plastic pyrolysis oil and waste cooking oil biodiesel were mixed with palm oil biodiesel –commercial diesel mixture to improve fuel characteristics, engine performance, and emission parameters. The palm oil biodiesel of the quaternary fuel mixture was kept constant at 10%. The results were compared with B30a fuel and B10 (10% for palm oil biodiesel and 90% for diesel; commercial diesel). The findings indicated that compared with B30a fuel, the brake power and brake thermal efficiency of all quaternary fuel mixtures were increased by up to 2.78% and 9.81%, respectively. Compared with B30a, all quaternary fuels also showed up to a 6.31% reduction in brake-specific fuel consumption. Compared with B30a, the maximum carbon monoxide and carbon dioxide emissions of B40 (60% commercial diesel, 10% palm oil biodiesel, 15% waste plastic pyrolysis oil and 15% waste cooking oil biodiesel) quaternary fuel were reduced by 19.66% and 4.16%, respectively. The B20 (80% commercial diesel, 10% palm oil biodiesel, 5% waste plastic pyrolysis oil and 5% waste cooking oil biodiesel) quaternary blend showed a maximum reduction of 41.86% in hydrocarbon emissions collated to B30a. Compared with B10, the average coefficient of friction of the quaternary fuel mixture of B40, B30b (70% commercial diesel, 10% palm oil biodiesel, 10% waste plastic pyrolysis oil and 10% waste cooking oil biodiesel), and B20 were reduced by 3.01%, 1.20%, and 0.23%, respectively. Therefore, the quaternary blends show excellent utilization potential in diesel engine performance.

scholarly journals Cetane Improvers and Ethanol Performance and Emissions Characteristics Using Pyrorated Biodiesel

2018 ◽  
Author(s):  
Maroa Semakula ◽  
Freddie Inambao
Keyword(s):  
Alternative Fuels ◽  
Low Cost ◽  
Engine Performance ◽  
Alternative Fuel ◽  
Fuel Additive ◽  
Natural Environments ◽  
Pyrolysis Oil ◽  
Volume Percentage ◽  
Waste Plastic ◽  
Performance And Emission

Alternative fuels available at low cost, friendly to natural environments and meet the energy needs and demands, have witnessed a growing demand and use today. Ethanol is an attractive renewable energy source with a high content of oxygen. Ethanol can be produced through ethanolisis, however for this work direct blending of conventional diesel, waste plastic pyrolysis oil and ethanol with commercial fuel improver CI-0808 purchased from Innospec company was attempted. The primary purpose of adding a cetane improver was to improve the combustion characteristics of the blends by at least 1- 3 ignition quality points. Five mixing ratios were chosen in the following order, 50:25:25, 60: 20:20, 70: 15:15, 80: 10:10 and 90: 5:5 for Waste Plastic Pyrolysis Oil (WPPO), ethanol and conventional diesel (CD) respectively. However, for the fuel additive mixing ratio the total volume percentage was considered and the ratio put at 0.01% of the total quantity of blended fuel. In this work WPPO, diesel blends and fuel additives improvers were used as alternative fuel. This was to evaluate their performance and emission characteristics in a stationary single cylinder water cooled experimental diesel engine. The CI-0808 was added due to its potential power to reduce emissions of CO, UHC, NOX, PM and improved engine performance. The results obtained were compared carefully to ASTM standards and discussed using graph curves figures and tabulated values. The conclusion was that ethanol and WPPO blends can be used in diesel engines as alternative fuel without modification. Used in combination with cetane improvers the emissions reduce significantly and performance improved equalling that of conventional diesel fuel.

scholarly journals A Review on the Thermochemical Recycling of Waste Tyres to Oil for Automobile Engine Application

Energies ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3837
Author(s):  
Mohammad I. Jahirul ◽  
Farhad M. Hossain ◽  
Mohammad G. Rasul ◽  
Ashfaque Ahmed Chowdhury
Keyword(s):  
Diesel Engine ◽  
Engine Performance ◽  
Calorific Value ◽  
High Viscosity ◽  
Combustion Efficiency ◽  
Fuel Additive ◽  
Pyrolysis Oil ◽  
Performance And Emission ◽  
Automobile Engines ◽  
Direct Use

Utilising pyrolysis as a waste tyre processing technology has various economic and social advantages, along with the fact that it is an effective conversion method. Despite extensive research and a notable likelihood of success, this technology has not yet seen implementation in industrial and commercial settings. In this review, over 100 recent publications are reviewed and summarised to give attention to the current state of global tyre waste management, pyrolysis technology, and plastic waste conversion into liquid fuel. The study also investigated the suitability of pyrolysis oil for use in diesel engines and provided the results on diesel engine performance and emission characteristics. Most studies show that discarded tyres can yield 40–60% liquid oil with a calorific value of more than 40 MJ/kg, indicating that they are appropriate for direct use as boiler and furnace fuel. It has a low cetane index, as well as high viscosity, density, and aromatic content. According to diesel engine performance and emission studies, the power output and combustion efficiency of tyre pyrolysis oil are equivalent to diesel fuel, but engine emissions (NOX, CO, CO, SOX, and HC) are significantly greater in most circumstances. These findings indicate that tyre pyrolysis oil is not suitable for direct use in commercial automobile engines, but it can be utilised as a fuel additive or combined with other fuels.

scholarly journals Effect of Methanol/Water Mixed Fuel Compound Injection on Engine Combustion and Emissions

Energies ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4491
Author(s):  
Changchun Xu ◽  
Haengmuk Cho
Keyword(s):  
Fuel Consumption ◽  
Ignition Delay ◽  
Fuel Injection ◽  
Fuel Efficiency ◽  
Engine Performance ◽  
Hydroxyl Group ◽  
Combustion Mechanism ◽  
Performance And Emission ◽  
Reduce Emissions ◽  
Concentration Ratios

Due to the recent global increase in fuel prices, to reduce emissions from ground transportation and improve urban air quality, it is necessary to improve fuel efficiency and reduce emissions. Water, methanol, and a mixture of the two were added at the pre-intercooler position to keep the same charge and cooling of the original rich mixture, reduce BSFC and increase ITE, and promote combustion. The methanol/water mixing volume ratios of different fuel injection strategies were compared to find the best balance between fuel consumption, performance, and emission trends. By simulating the combustion mechanism of methanol, water, and diesel mixed through the Chemkin system, the ignition delay, temperature change, and the generation rate of the hydroxyl group (−OH) in the reaction process were analyzed. Furthermore, the performance and emission of the engine were analyzed in combination with the actual experiment process. This paper studied the application of different concentration ratios of the water–methanol–diesel mixture in engines. Five concentration ratios of water–methanol blending were injected into the engine at different injection ratios at the pre-intercooler position, such as 100% methanol, 90% methanol/10% water, 60% methanol/40% water, 30% methanol/70% water, 100% water was used. With different volume ratios of premixes, the combustion rate and combustion efficiency were affected by droplet extinguishment, flashing, or explosion, resulting in changes in combustion temperature and affecting engine performance and emissions. In this article, the injection carryout at the pre-intercooler position of the intake port indicated thermal efficiency increase and a brake specific fuel consumption rate decrease with the increase of water–methanol concentration, and reduce CO, UHC, and nitrogen oxide emissions. In particular, when 60% methanol and 40% water were added, it was found that the ignition delay was the shortest and the cylinder pressure was the largest, but the heat release rate was indeed the lowest.

Sign in / Sign up

Export Citation Format

Share Document