scholarly journals Simulation of Dual Fuel Combustion of Direct Injection Engine with Variable Natural Gas Premixed Ratio

2019 ◽  
Vol 32 (9) ◽  
Keyword(s):  
Natural Gas ◽  
Direct Injection ◽  
Fuel Combustion ◽  
Dual Fuel ◽  
Direct Injection Engine ◽  
Dual Fuel Combustion

Numerical Investigation of the Performance of a High Pressure Direct Injection (HPDI) Natural Gas Engine

2014 ◽  
Author(s):  
Won Geun Lee ◽  
David Montgomery
Keyword(s):  
High Pressure ◽  
Natural Gas ◽  
Direct Injection ◽  
Gas Injection ◽  
Load Condition ◽  
Fuel Combustion ◽  
Dual Fuel ◽  
Injection Timing ◽  
Pilot Injection ◽  
Dual Fuel Combustion

High Pressure Direct-Injection (HPDI) is a technology option for engines used in mobile equipment applications where use of LNG as a fuel is desired. Using the combination of a diesel pilot injection and direct gas injection, HPDI has the potential to deliver low emissions, excellent transient performance, high efficiency, and high gas substitution. When the HPDI program was initially undertaken, in order to aid in initial hardware design, 3-dimensional computational fluid dynamic modeling was conducted to understand the mixing and reaction processes in the combustion chamber of an HPDI engine. Gaining insight into qualitative trends of operation parameters and hardware configurations was a first critical step toward delivering a hardware set to demonstrate HPDI natural gas combustion system capabilities. To model the combustion of multi-component fuel at arbitrary constituent ratios, a combustion model based on a detailed chemical kinetics approach was employed. Several published mechanisms and combinations of established mechanisms were tested by comparing results with existing fumigated dual fuel engine results. The result shows that some of combined mechanisms for n-heptane combustion and methane combustion are capable of adequately predicting combustion behavior in diesel-natural gas dual fuel combustion systems. One of the reduced n-heptane mechanisms (by Patel et al.) also matched dual fuel combustion results reasonably well. This preliminary simulation study was conducted with typical trapped air conditions and fuel quantities matching the energy delivery for a 100 % load condition in existing DI diesel engines. A full 360-degree mesh at intake valve closing was constructed and a detailed geometry of the gas injector nozzle and sac area was modeled in locally refined grids using a Caterpillar proprietary CFD code that accepts industry standard mechanisms. The diesel pilot injection followed by gas injection and resulting combustion inside an HPDI engine was simulated from IVC through the compression and combustion strokes. The operating parameters — such as diesel pilot injection timing, pilot injection amount, and start of gas injection — were varied, and the effect on IMEP, NOx, CO and cylinder pressure were investigated. It was shown that the start of gas injection is the strongest parameter for control of combustion. Subsequent to the work discussed in this paper, the hardware configuration established as optimal during the modeling work was carried forward to the physical engine testing and was successful in delivering the performance and emissions goals without modification, demonstrating the accuracy and value of modern combustion modeling.

Mapping the combustion modes of a dual-fuel compression ignition engine

2021 ◽  
pp. 146808742110183
Author(s):  
Jonathan Martin ◽  
André Boehman
Keyword(s):  
Direct Injection ◽  
Fuel Combustion ◽  
Dual Fuel ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Combustion Modes ◽  
Si Engines ◽  
Dual Fuel Combustion ◽  
Soot Emissions ◽  
Ci Engines

Compression-ignition (CI) engines can produce higher thermal efficiency (TE) and thus lower carbon dioxide (CO2) emissions than spark-ignition (SI) engines. Unfortunately, the overall fuel economy of CI engine vehicles is limited by their emissions of nitrogen oxides (NOx) and soot, which must be mitigated with costly, resource- and energy-intensive aftertreatment. NOx and soot could also be mitigated by adding premixed gasoline to complement the conventional, non-premixed direct injection (DI) of diesel fuel in CI engines. Several such “dual-fuel” combustion modes have been introduced in recent years, but these modes are usually studied individually at discrete conditions. This paper introduces a mapping system for dual-fuel CI modes that links together several previously studied modes across a continuous two-dimensional diagram. This system includes the conventional diesel combustion (CDC) and conventional dual-fuel (CDF) modes; the well-explored advanced combustion modes of HCCI, RCCI, PCCI, and PPCI; and a previously discovered but relatively unexplored combustion mode that is herein titled “Piston-split Dual-Fuel Combustion” or PDFC. Tests show that dual-fuel CI engines can simultaneously increase TE and lower NOx and/or soot emissions at high loads through the use of Partial HCCI (PHCCI). At low loads, PHCCI is not possible, but either PDFC or RCCI can be used to further improve NOx and/or soot emissions, albeit at slightly lower TE. These results lead to a “partial dual-fuel” multi-mode strategy of PHCCI at high loads and CDC at low loads, linked together by PDFC. Drive cycle simulations show that this strategy, when tuned to balance NOx and soot reductions, can reduce engine-out CO2 emissions by about 1% while reducing NOx and soot by about 20% each with respect to CDC. This increases emissions of unburnt hydrocarbons (UHC), still in a treatable range (2.0 g/kWh) but five times as high as CDC, requiring changes in aftertreatment strategy.

Experimental Investigation of the Natural Gas / Diesel Dual-Fuel Combustion Using a Rapid Compression Machine

2011 ◽  
Author(s):  
Julio C. C. Eg\ausquiza ◽  
Sergio L. Braga ◽  
Carlos V. M. Braga ◽  
Antonio C. S. Villela ◽  
Newton R. Moura
Keyword(s):  
Experimental Investigation ◽  
Natural Gas ◽  
Fuel Combustion ◽  
Dual Fuel ◽  
Rapid Compression Machine ◽  
Dual Fuel Combustion ◽  
Rapid Compression

Numerical Simulation of a Large Bore Dual Fuel Marine Engine Using Tabulated Detailed Reaction Mechanisms

2019 ◽  
Author(s):  
Sascha Andree ◽  
Dmitry Goryntsev ◽  
Martin Theile ◽  
Björn Henke ◽  
Karsten Schleef ◽  
...  
Keyword(s):  
Reaction Mechanism ◽  
Natural Gas ◽  
Chemical Reaction ◽  
Reaction Mechanisms ◽  
Combustion Process ◽  
Fuel Combustion ◽  
Dual Fuel ◽  
Start Of Injection ◽  
Flamelet Generated Manifold ◽  
Dual Fuel Combustion

Abstract The simulation of a diesel natural gas dual fuel combustion process is the topic of this paper. Based on a detailed chemical reaction mechanism, which was applied for such a dual fuel combustion, the complete internal combustion engine process was simulated. Two single fuel combustion reaction mechanisms from literature were merged, to consider the simultaneous reaction paths of diesel and natural gas. N-heptane was chosen as a surrogate for diesel. The chemical reaction mechanisms are solved by applying a tabulation method using the software tool AVL Tabkin™. In combination with a Flamelet Generated Manifold (FGM) combustion model, this leads to a reduction of computational effort compared to a direct solving of the reaction mechanism, because of a decoupling of chemistry and flow calculations. Turbulence was modelled using an unsteady Reynolds-Averaged Navier Stokes (URANS) model. In comparison to conventional combustion models, this approach allows for detailed investigations of the complex ignition process of the dual fuel combustion process. The unexpected inversely proportional relationship between start of injection (SOI) and start of combustion (SOC), a later start of injection makes for an earlier combustion of the main load, is only one of these interesting combustion phenomena, which can now be analyzed in detail. Further investigations are done for different engine load points and multiple pilot injection strategies. The simulation results are confirmed by experimental measurements at a medium speed dual fuel single cylinder research engine.

Ability of the Methane Number Index of a Fuel to Predict Rapid Combustion in Heavy Duty Dual Fuel Engines for North American Locomotives

2015 ◽  
Author(s):  
Daniel G. Van Alstine ◽  
David T. Montgomery ◽  
Timothy J. Callahan ◽  
Radu C. Florea
Keyword(s):  
Natural Gas ◽  
Heat Release ◽  
Heat Release Rate ◽  
Release Rate ◽  
Fuel Combustion ◽  
Dual Fuel ◽  
Rapid Combustion ◽  
Dual Fuel Engines ◽  
Dual Fuel Combustion ◽  
Methane Number

Low natural gas prices have made the fuel an attractive alternative to diesel and other common fuels, particularly in applications that consume large quantities of fuel. The North American rail industry is examining the use of locomotives powered by dual fuel engines to realize savings in fuel costs. These dual fuel engines can substitute a large portion of the diesel fuel with natural gas that is premixed with the intake air. Engine knock in traditional premixed spark-ignited combustion is undesirable but well characterized by the Methane Number index, which quantifies the propensity of a gaseous fuel to autoignite after a period of time at high temperature. Originally developed for spark-ignited engines, the ability of the methane number index to predict a fuel’s “knock” behavior in dual fuel combustion is not as fully understood. The objective of this effort is to evaluate the ability of an existing methane number algorithm to predict rapid combustion in a dual fuel engine. Sets of specialized natural gas fuel blends that, according to the MWM methane number algorithm, should have similar knock characteristics are tested in a dual fuel engine and induced to experience rapid combustion. Test results and CFD analysis reveal that rapid or aggressive combustion rates happen late in the dual fuel combustion event with this engine hardware configuration. The transition from normal combustion to late rapid combustion is characterized by changes in the heat release rate profiles. In this study, the transition is also represented by a shift in the crank angle location of the combustion’s peak heat release rate. For fuels of similar methane number that should exhibit similar knock behavior, these transitions occur at significantly different relative air-fuel ratios, demonstrating that the existing MWM methane number algorithm, while excellent for spark-ignited engines, does not fully predict the propensity for rapid combustion to occur in a dual fuel engine within the scope of this study. This indicates that physical and chemical phenomena present in rapid or aggressive dual fuel combustion processes may differ from those in knocking spark-ignited combustion. In its current form a methane number algorithm can be used to conservatively rate dual fuel engines. It is possible that derivation of a new reactivity index that better predicts rapid combustion behavior of the gaseous fuel in dual fuel combustion would allow ratings to be less conservative.

Effects of N-Butanol Content on the Dual-Fuel Combustion Mode With CNG at Two Engine Speeds

2018 ◽  
Author(s):  
Xiangyu Meng ◽  
Wuqiang Long ◽  
Yihui Zhou ◽  
Mingshu Bi ◽  
Chia-Fon F. Lee
Keyword(s):  
Thermal Efficiency ◽  
Engine Speed ◽  
Direct Injection ◽  
Fuel Combustion ◽  
Dual Fuel ◽  
Combustion Mode ◽  
Start Of Injection ◽  
Wide Range ◽  
Pilot Fuel ◽  
Dual Fuel Combustion

Because of the potential to reduce NOx and PM emissions simultaneously and the utilization of biofuel, diesel/compressed natural gas (CNG) dual-fuel combustion mode with port injection of CNG and direct injection of diesel has been widely studied. While in comparison with conventional diesel combustion mode, the dual-fuel combustion mode generally leads lower thermal efficiency, especially at low and medium load, and higher carbon monoxide (CO) and total hydrocarbons (THC) emissions. In this work, n-butanol was blended with diesel as the pilot fuel to explore the possibility to improve the performance and emissions of dual-fuel combustion mode with CNG. Various pilot fuels of B0 (pure diesel), B10 (90% diesel/10% n-butanol by volume basis), B20 (80% diesel/20% n-butanol) and B30 (70% diesel/30% n-butanol) were compared at the CNG substitution rate of 70% by energy basis under the engine speeds of 1400 and 1800 rpm. The experiments were carried out by sweeping a wide range of pilot fuel start of injection timings based on the same total input energy including pilot fuel and CNG. As n-butanol was added into the pilot fuel, the pilot fuel/CNG/air mixture tends to be more homogeneous. The results showed that for the engine speed of 1400 rpm, pilot fuel with n-butanol addition leads to a slightly lower indicated thermal efficiency (ITE). B30 reveals much lower NOx emission and slightly higher THC emissions. For the engine speed of 1800 rpm, B20 can improve ITE and decrease the NOx and THC emissions simultaneously relative to B0.

Sign in / Sign up

Export Citation Format

Share Document