Numerical Solution of a Hydrofoil Moving Near an Interface

1996 ◽  
Vol 40 (04) ◽  
pp. 269-277
Author(s):  
G. X. Wu ◽  
T. Miloh ◽  
G. Zilman
Keyword(s):  
Boundary Conditions ◽  
Numerical Solution ◽  
Body Surface ◽  
Iteration Scheme ◽  
The Body ◽  
Two Fluids ◽  
Linearized Theory

The problem of a hydrofoil moving near an interface of two fluids of different densities is analyzed. An iteration scheme is proposed which imposes the boundary conditions on the body surface and on the interface alternately. The numerical solution is obtained by using the linearized theory and a Glauert-type expansion for the vortex distribution. Results are provided for various cases with different densities and different speeds.

The Role of Computer Modeling in Electrocardiography

1990 ◽  
Vol 29 (04) ◽  
pp. 282-288 ◽  
Author(s):  
A. van Oosterom
Keyword(s):  
Electrical Activity ◽  
Computer Modeling ◽  
Body Surface ◽  
Electrical Current ◽  
The Body ◽  
Volume Conductor ◽  
Current Generator ◽  
Cardiac Electrical Activity ◽  
Source Models

AbstractThis paper introduces some levels at which the computer has been incorporated in the research into the basis of electrocardiography. The emphasis lies on the modeling of the heart as an electrical current generator and of the properties of the body as a volume conductor, both playing a major role in the shaping of the electrocardiographic waveforms recorded at the body surface. It is claimed that the Forward-Problem of electrocardiography is no longer a problem. Several source models of cardiac electrical activity are considered, one of which can be directly interpreted in terms of the underlying electrophysiology (the depolarization sequence of the ventricles). The importance of using tailored rather than textbook geometry in inverse procedures is stressed.

The use of Body Surface Index as a Better Clinical Health indicators Compare to Body Mass Index and Body Surface Area for Clinical Application

2018 ◽  
pp. 131-136
Author(s):  
Shirazu I. ◽  
Theophilus. A. Sackey ◽  
Elvis K. Tiburu ◽  
Mensah Y. B. ◽  
Forson A.
Keyword(s):  
Surface Area ◽  
Body Surface Area ◽  
Clinical Application ◽  
Body Surface ◽  
Body Height ◽  
Health Indicators ◽  
The Body ◽  
Body Parameters ◽  
The Relationship ◽  
Individual Body

The relationship between body height and body weight has been described by using various terms. Notable among them is the body mass index, body surface area, body shape index and body surface index. In clinical setting the first descriptive parameter is the BMI scale, which provides information about whether an individual body weight is proportionate to the body height. Since the development of BMI, two other body parameters have been developed in an attempt to determine the relationship between body height and weight. These are the body surface area (BSA) and body surface index (BSI). Generally, these body parameters are described as clinical health indicators that described how healthy an individual body response to the other internal organs. The aim of the study is to discuss the use of BSI as a better clinical health indicator for preclinical assessment of body-organ/tissue relationship. Hence organ health condition as against other body composition. In addition the study is `also to determine the best body parameter the best predict other parameters for clinical application. The model parameters are presented as; modeled height and weight; modelled BSI and BSA, BSI and BMI and modeled BSA and BMI. The models are presented as clinical application software for comfortable working process and designed as GUI and CAD for use in clinical application.

Modelling solid transport in building drainage systems

1996 ◽  
Vol 33 (9) ◽  
pp. 9-16 ◽  
Author(s):  
John A. Swaffield ◽  
John A. McDougall
Keyword(s):  
Decision Making ◽  
Boundary Conditions ◽  
Numerical Solution ◽  
Water Conservation ◽  
Transient Flow ◽  
Drainage System ◽  
System Model ◽  
Flow Depth ◽  
Flow Conditions ◽  
Solid Transport

The transient flow conditions within a building drainage system may be simulated by the numerical solution of the defining equations of momentum and continuity, coupled to a knowledge of the boundary conditions representing either appliances discharging to the network or particular network terminations. While the fundamental mathematics has long been available, it is the availability of fast, affordable and accessible computing that has allowed the development of the simulations presented in this paper. A drainage system model for unsteady partially filled pipeflow will be presented in this paper. The model is capable of predicting flow depth and rate, and solid velocity, throughout a complex network. The ability of such models to assist in the decision making and design processes will be shown, particularly in such areas as appliance design and water conservation.

Axisymmetric flow near the critical point on the moving boundary

2010 ◽  
Vol 7 ◽  
pp. 182-190
Author(s):  
I.Sh. Nasibullayev ◽  
E.Sh. Nasibullaeva
Keyword(s):  
Fluid Flow ◽  
Finite Difference ◽  
Boundary Conditions ◽  
Numerical Solution ◽  
Axial Velocity ◽  
Moving Boundary ◽  
Axisymmetric Flow ◽  
Boundary Motion ◽  
Newton Raphson ◽  
Raphson Method

In this paper the investigation of the axisymmetric flow of a liquid with a boundary perpendicular to the flow is considered. Analytical equations are derived for the radial and axial velocity and pressure components of fluid flow in a pipe of finite length with a movable right boundary, and boundary conditions on the moving boundary are also defined. A numerical solution of the problem on a finite-difference grid by the iterative Newton-Raphson method for various velocities of the boundary motion is obtained.

Mannose-binding C-type lectins as defense molecules on the body surface of the sea urchin Pseudocentrotus depressus

2021 ◽  
Vol 116 ◽  
pp. 103915
Author(s):  
Chihiro Iiyama ◽  
Fuyu Yoneda ◽  
Masaya Tsutsumi ◽  
Shigeyuki Tsutsui ◽  
Osamu Nakamura
Keyword(s):  
Sea Urchin ◽  
Body Surface ◽  
The Body ◽  
Mannose Binding ◽  
Defense Molecules

Development and Validation of a New Scoring Tool to Evaluate the Clinical Evolution of Adult Patients with Nonsegmental Vitiligo

Dermatology ◽  
2021 ◽  
pp. 1-9
Author(s):  
María Luisa Peralta-Pedrero ◽  
Denisse Herrera-Bringas ◽  
Karla Samantha Torres-González ◽  
Martha Alejandra Morales-Sánchez ◽  
Fermín Jurado Santa-Cruz ◽  
...  
Keyword(s):  
Body Surface ◽  
Task Force ◽  
Intraclass Correlation ◽  
The Body ◽  
Response To Treatment ◽  
Similar Response ◽  
Clinical Evolution ◽  
Wide Range ◽  
Patient Reported ◽  
Extreme Groups

<b><i>Background:</i></b> Vitiligo has an unpredictable course and a variable response to treatment. Furthermore, the improvement of some vitiligo lesions cannot be considered a guarantee of a similar response to the other lesions. Instruments for patient-reported outcome measures (PROM) can be an alternative to measure complex constructions such as clinical evolution. <b><i>Objective:</i></b> The aim of this study was to validate a PROM that allows to measure the clinical evolution of patients with nonsegmental vitiligo in a simple but standardized way that serves to gather information for a better understanding of the disease. <b><i>Methods:</i></b> The instrument was created through expert consensus and patient participation. For the validation study, a prospective cohort design was performed. The body surface area affected was measured with the Vitiligo Extension Score (VES), the extension, the stage, and the spread by the evaluation of the Vitiligo European Task Force assessment (VETFa). Reliability was determined with test-retest, construct validity through hypothesis testing, discriminative capacity with extreme groups, and response capacity by comparing initial and final measurements. <b><i>Results:</i></b> Eighteen semi-structured interviews and 7 cognitive interviews were conducted, and 4 dermatologists were consulted. The instrument Clinical Evolution-Vitiligo (CV-6) was answered by 119 patients with a minimum of primary schooling. A wide range was observed in the affected body surface; incident and prevalent cases were included. The average time to answer the CV-6 was 3.08 ± 0.58 min. In the test-retest (<i>n</i> = 53), an intraclass correlation coefficient was obtained: 0.896 (95% CI 0.82–0.94; <i>p</i> &#x3c; 0.001). In extreme groups, the mean score was 2 (2–3) and 5 (4–6); <i>p</i> &#x3c; 0.001. The initial CV-6 score was different from the final one and the change was verified with VES and VETFa (<i>p</i> &#x3c; 0.05, <i>n</i> = 92). <b><i>Conclusions:</i></b> The CV-6 instrument allows patient collaboration, it is simple and brief, and it makes it easier for the doctor to focus attention on injuries that present changes at the time of medical consultation.

Sign in / Sign up

Export Citation Format

Share Document