scholarly journals Experimental analysis of vertical axis wind turbine active pitch control system with Permanent Magnet Synchronous Motor using MATLAB Simulink tools

Energetika ◽  
2016 ◽  
Vol 62 (1-2) ◽  
Author(s):  
Tomas Komass
Keyword(s):  
Control System ◽  
Wind Turbine ◽  
Permanent Magnet ◽  
Test Bench ◽  
Permanent Magnet Synchronous Motor ◽  
Vertical Axis ◽  
Vertical Axis Wind Turbine ◽  
Matlab Simulink ◽  
Pitch Control ◽  
Pitch System

Efficient vertical axis wind turbine (VAWT) technology is a key topic for the future wind energy market. At the moment, VAWTs are seldom used for electricity production. The development of new technologies for building a new generation of VAWTs, which will be more efficient, user-friendly, and with very low noise pollution levels is the target for many researchers. The goal of this research was to analyse an active pitch control system in an experimental setting through construction of an active pitch control system test bench using a Permanent Magnet Synchronous Motor (PMSM) and to develop new testing programmes for analytical system performance tests. The  current commercial turbines do not carry an active pitch system for a VAWT; however, the concept of an active turbine blade pitching opens new opportunities for boosting the efficiency, safety, and user-friendliness of VAWTs. The  research consists of the  mathematical model and control system operating in a simulation environment in a closed loop with the test bench setup consisting of an active pitch control system. By applying a specially developed VAWT simulation model implemented in MATLAB Simulink, an active pitch system was tested and analysed under various conditions, which were as close as possible to the real-world operating conditions. The results of the testing and analysis show that an active pitch system using the PMSM can be very efficient and fast-operating. An active pitch system is able to work on the needed conditions by using the PMSM. Analysis shows that while using the PMSM for a turbine active pitch system, certain conditions should be taken into account in order to achieve the best results and to reduce costs. Full and effective use of active pitch system components can improve VAWT performance.

Coupled Dynamics of a Vertical Axis Wind Turbine (VAWT) With Active Blade Pitch Control on a Semi-Submersible Floater

2018 ◽  
Author(s):  
Ebert Vlasveld ◽  
Fons Huijs ◽  
Feike Savenije ◽  
Benoît Paillard
Keyword(s):  
Wind Turbine ◽  
Wind Velocity ◽  
Vertical Axis ◽  
Power Production ◽  
Mooring Line ◽  
Vertical Axis Wind Turbine ◽  
Coupled Dynamics ◽  
Low Frequencies ◽  
Pitch Control ◽  
Thrust And Torque

A vertical axis wind turbine (VAWT) typically has a low position of the center of gravity and a large allowable tilt angle, which could allow for a relatively small floating support structure. Normally however, the drawback of large loads on the VAWT rotor during parked survival conditions limits the extent to which the floater size can be reduced. If active blade pitch control is applied to the VAWT, this drawback can be mitigated and the benefits can be fully utilized. The coupled dynamics of a 6 MW VAWT with active blade pitch control supported by a GustoMSC Tri-Floater semi-submersible floater have been simulated using coupled aero-hydro-servo-elastic software. The applied blade pitch control during power production results in a steady-state thrust curve which is more comparable to a HAWT, with the maximum thrust occurring at rated wind velocity. During power production, floater motions occur predominantly at low frequencies. These low frequency motions are caused by variations in the wind velocity and consequently the rotor thrust and torque. For the parked survival condition, it is illustrated that active blade pitch control can be used to effectively reduce dynamic load variations on the rotor and minimize floater motions and mooring line tensions.

Design and Test of a Vertical-Axis Wind Turbine with Pitch Control

2012 ◽  
Vol 225 ◽  
pp. 338-343 ◽  
Author(s):  
J.J. Miau ◽  
S.Y. Liang ◽  
R.M. Yu ◽  
C.C. Hu ◽  
T.S. Leu ◽  
...  
Keyword(s):  
Wind Turbine ◽  
Vertical Axis ◽  
Aerodynamic Characteristics ◽  
Vertical Axis Wind Turbine ◽  
Variable Pitch ◽  
Pitch Control ◽  
Remarkable Improvement ◽  
The One ◽  
Variable Pitch Control ◽  
Starting Torque

The concept of pitch control has been implemented in the design of a small vertical-axis wind turbine. Benefits gained can be shown by the experimental and numerical results presented in this paper. As found, the method of variable pitch control outperforms the one of fixed pitch control. The present results show that the former can make remarkable improvement on the starting torque as well as the aerodynamic characteristics at low tip speed ratios.

The Straight-Bladed Morphing Vertical Axis Wind Turbine

2016 ◽  
Author(s):  
David MacPhee ◽  
Asfaw Beyene
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Low Cost ◽  
Vertical Axis ◽  
Power Coefficient ◽  
Vertical Axis Wind Turbine ◽  
Pitch Control ◽  
Control Schemes ◽  
Horizontal Axis Wind Turbines ◽  
Novel Concept

Blade pitch control has been extremely important for the development of Horizontal-Axis Wind Turbines (HAWTs), allowing for greater efficiency over a wider range of operational regimes when compared to rigid-bladed designs. For Vertical-Axis Wind Turbines (VAWTs), blade pitching is inherently more difficult due to a dependence of attack angle on turbine armature location, shaft speed, and wind speed. As a result, there have been very few practical pitch control schemes put forward for VAWTs, which may be a major reason why this wind turbine type enjoys a much lower market share as compared to HAWTs. To alleviate this issue, the flexible, straight-bladed vertical-axis turbine is presented, which can passively adapt its geometry to local aerodynamic loadings and serves as a low-cost blade pitch control strategy increasing efficiency and startup capabilities. Using two-dimensional fluid-structure action simulations, this novel concept is compared to an identical rigid one and is proven to be superior in terms of power coefficient due to decreased torque minima. Moreover, due to the flexible nature of the blades, the morphing turbine achieves less severe oscillatory loadings. As a result, the morphing blade design is expected to not only increase efficiency but also system longevity without additional system costs usually associated with active pitch control schemes.

Application of Variable Blade Pitch Control on Improving the Performance of Vertical Axis Wind Turbine

2012 ◽  
Vol 229-231 ◽  
pp. 2339-2342
Author(s):  
J.C. Cheng ◽  
S.J Su ◽  
J.J Miau
Keyword(s):  
Wind Turbine ◽  
Vertical Axis ◽  
Aerodynamic Characteristics ◽  
Speed Ratio ◽  
Vertical Axis Wind Turbine ◽  
Energy Capture ◽  
Pitch Control ◽  
Tip Speed Ratio ◽  
Torque Coefficient ◽  
Variable Pitch Control

A three blades vertical axis wind turbine simulation is performed to study the unsteady aerodynamic characteristics with blade pitch control. Several fixed and variable blade pitch models under different tip speed ratio are adopted to improve performance of the wind turbine. Results show that an appropriate pitch control model can effectively decrease the range of negative torque regime to reduce the vibration of the wind turbine. Besides, the average torque coefficient as well as the energy capture efficiency can be also improved, especially for the lower tip speed ratio. The overall efficiency of the wind turbines in power generation will be enhanced. For the cases under the tip speed ratio between 1 and 3, the efficiency can be enhanced 243% and 486% for fixed and variable pitch control models respectively as comparing with non-pitch control cases.

A Comparative Analysis of Three-Phase, Multi-Phase and Dual Stator Axial Flux Permanent Magnet Synchronous Generator for Vertical Axis Wind Turbine

2013 ◽  
Vol 446-447 ◽  
pp. 709-715 ◽  
Author(s):  
M. Shahrukh Adnan Khan ◽  
Rajprasad K. Rajkumar ◽  
Rajparthiban K. Rajkumar ◽  
C.V. Aravind
Keyword(s):  
Wind Turbine ◽  
Permanent Magnet ◽  
Synchronous Generator ◽  
Vertical Axis ◽  
Vertical Axis Wind Turbine ◽  
Synchronous Generators ◽  
Permanent Magnet Synchronous Generators ◽  
Wind Turbine System ◽  
Three Phase ◽  
Multi Phase

In this paper, the performances of all the three kinds of Axial type Multi-Pole Permanent Magnet Synchronous Generators (PMSG) namely Three-phase, Multi-phase or Five Phase and Double Stator fixed in Vertical Axis Wind Turbine (VAWT) were investigated and compared in order to get an optimal system. MATLAB/Simulink had been used to model and simulate the wind turbine system together with all the three types Permanent Magnet Generators. It was observed from the result that with the increasing number of pole in both low and high wind speed, the five phase generator produced more power than the other two generators. In general, it was observed that the responses of the Multi-phase generator at both high and low speed wind showed promising aspect towards the system followed by Dual Stator. But with the change of the variables such as wind velocity, turbine height, radius, area together with the generator pole pairs and stator resistance, the optimum system should be chosen by considering the trade-off between different configurations which were firmly analyzed and described in this paper.

scholarly journals Relationship between Starting Torque and Thermal Behaviour for a Permanent Magnet Synchronous Generator (PMSG) Applied with Vertical Axis Wind Turbine (VAWT)

2021 ◽  
Vol 13 (16) ◽  
pp. 9151
Author(s):  
Mintra Trongtorkarn ◽  
Thanansak Theppaya ◽  
Kuaanan Techato ◽  
Montri Luengchavanon ◽  
Chainuson Kasagepongsarn
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Permanent Magnet ◽  
Wind Turbines ◽  
High Speed ◽  
Electrical Power ◽  
Vertical Axis ◽  
Vertical Axis Wind Turbine ◽  
Minimization Method ◽  
Starting Torque

The application of wind turbine technology in low wind speed regions such as Southeast Asia has recently attracted increased attention. Wind turbines are designed as special structures with low starting torque, and many starting torque minimization processes exist for permanent magnet synchronous generators (PMSGs). Plurality is applied to decrease the starting torque in radial flux permanent magnet disk generators. The most popular starting torque minimization method uses a magnet skew technique. When used at 20°, this technique reduced starting torque by 4.72% (on load) under 500 rpm at 50 Hz for 120 min. By contrast, a PMSG with magnet skew conditions set at under 2° reduced electrical power by 3.86%. For high-speed PMSGs, magnet skew techniques affect the generation of heat in the coils (stator), with heat decrease at the middle of the coil, on its surface and between the coils at 2.90%, 3.10% and 2.40%, respectively. PMSGs were installed in vertical axis wind turbines (VAWTs), and heat generation in relation to wind speed and electrical power was assessed. Magnet skew techniques can be used in PMSGs to reduce staring torque, while skew techniques also reduce electrical power and heat generated at the stator.

scholarly journals Design and Implementation of an Intelligent Blade Pitch Control System and Stability Analysis for a Small Darrieus Vertical-Axis Wind Turbine

Energies ◽  
2021 ◽  
Vol 15 (1) ◽  
pp. 235
Author(s):  
Gebreel Abdalrahman ◽  
Mohamed A. Daoud ◽  
William W. Melek ◽  
Fue-Sang Lien ◽  
Eugene Yee
Keyword(s):  
Control System ◽  
Stability Analysis ◽  
Power Output ◽  
Pitch Angle ◽  
Vertical Axis ◽  
Prototype Model ◽  
Vertical Axis Wind Turbine ◽  
Pitch Control ◽  
Hybrid Controller ◽  
The Stability

A few studies have been conducted recently in order to improve the aerodynamic performance of Darrieus vertical-axis wind turbines with straight blades (H-type VAWTs). The blade pitch angle control is proposed to enhance the performance of H-type VAWTs. This paper aims to investigate the performance of an H-type VAWT in terms of its power output and self-starting capability using an intelligent blade pitch control strategy based on a multi-layer perceptron artificial neural network (MLP-ANN) method. The performance of the proposed blade pitch controller is investigated by adding a conventional controller (PID) to the MLP-ANN controller (i.e., a hybrid controller). The dynamics of an H-type VAWT is mathematically modeled in a nonlinear state space for the stability analysis in the sense of Lyapunov. The effectiveness of the proposed pitch control system is validated by building an H-type VAWT prototype model that is extensively tested outdoors under different conditions for both fixed and variable pitch angle configurations. Results demonstrated that the blade-pitching technique enhanced the power output of an H-type VAWT by approximately 22%. The hybrid controller that used a high percentage of the MLP-ANN controller achieved a better control performance by reducing the overshoot of the control response at high rotor speeds.

Variable pitch control for vertical-axis wind turbines

2018 ◽  
Vol 42 (2) ◽  
pp. 128-135 ◽  
Author(s):  
S Horb ◽  
R Fuchs ◽  
A Immas ◽  
F Silvert ◽  
P Deglaire
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Wind Turbine ◽  
Three Dimensional ◽  
Vertical Axis ◽  
Two Dimensional ◽  
Vertical Axis Wind Turbine ◽  
Horizontal Axis Wind Turbine ◽  
Variable Pitch ◽  
Pitch Control

NENUPHAR aims at developing the next generation of large-scale floating offshore vertical-axis wind turbine. To challenge the horizontal-axis wind turbine, the variable blade pitch control appears to be a promising solution. This article focuses on blade pitch law optimization and resulting power and thrust gain depending on the operational conditions. The aerodynamics resulting from the implementation of a variable blade pitch control are studied through numerical simulations, either with a three-dimensional vortex code or with two-dimensional Navier-stokes simulations (two-dimensional computational fluid dynamics). Results showed that the three-dimensional vortex code used as quasi-two-dimensional succeeded to give aerodynamic loads in very good agreement with two-dimensional computational fluid dynamics simulation results. The three-dimensional-vortex code was then used in three-dimensional configuration, highlighting that the variable pitch can enhance the vertical-axis wind turbine power coefficient ( Cp) by more than 15% in maximum power point tracking mode and decrease it by more than 75% in power limitation mode while keeping the thrust below its rated value.

Sign in / Sign up

Export Citation Format

Share Document