Most residual stress measurement methods are limited in terms of their stress and spatial resolution, number of stress tensor components measured and measurement uncertainty. In contrast, finite element simulations of welding processes provide full field distributions of residual stresses, with results dependent on the quality of the input conditions. Measurements and predictions are often not the same, and the true residual stress state is difficult to determine. In this paper both measurements and predictions of residual stresses, created in clad nuclear reactor pressure vessel steels, are made. The measurements are then used as input to a residual stress mapping technique provided within a finite element analysis. The technique is applied iteratively to converge to a balanced solution which is not necessarily unique. However, the technique aids the identification of locations for additional measurements. This is illustrated in the paper. The outcomes from the additional measurements permit more realistic and reliable estimates of the true residual state to be made. The outcomes are compared with the finite element simulations of the welding process and used to determine whether there is a need for additional input to the simulations.
Characterization of Residual Stresses in Compressor Discs for Aeroengines: Neutron Diffraction and Finite Element Simulations
