scholarly journals Effects of Yeast Concentration and Total Soluble Solids on the Quality of Wine Produced from Pineapple

2020 ◽  
pp. 28-42
Author(s):  
E. C. Udeagha ◽  
C. N. Ishiwu ◽  
C. U. Obiora ◽  
J. O. Iwouno
Keyword(s):  
Titratable Acidity ◽  
Ash Content ◽  
Soluble Solids ◽  
Ananas Comosus ◽  
Wine Production ◽  
Total Soluble Solids ◽  
General Acceptance ◽  
Yeast Concentration ◽  
Mouth Feel

This research was carried out to determine the effects of yeast concentration and total soluble solids on the quality of wine produced from pineapple. The experiment was a Response Surface Methodology in the form of Rotatable Central Composite Design (RCCD). Ripe pineapple fruit (Ananas comosus) was processed using pressure extraction to obtain the juice. The juice was divided into thirteen (13) portions. Each portion’s total soluble solids was adjusted using sugar syrup and then pitched with specified yeast concentration. All the thirteen (13) samples were fermented for 168 h at 25±3 °C and aged for seven weeks. The wine was analyzed for pH, titratable acidity, ash content, final total soluble solids and alcohol content using standard methods. The sensory attributes (colour, aroma, taste, mouth-feel, texture and general acceptability) of the wines were analyzed by a twenty-five member panelist using 9-point hedonic scale. The results of the physico-chemical analysis of the pineapple wines showed that pH , titratable acidity (tartaric acid) content, alcohol and final total soluble solids ranged from 3.58 – 4.58, 0.33 – 0.59 %, 4.33 – 10.66 %v/v, 3.35 – 5.65 °Brix respectively. The ash content ranged from 0.20 – 0.50 %. The mean sensory scores for colour, taste, aroma, texture, mouth-feel and general acceptance ranged from 3.28 – 7.96, 4.08 – 6.68, 4.04 – 5.96, 4.16 – 5.32, 4.00 – 5.84 and 4.04 – 6.72 respectively.  The mouthfeel of the pineapple wine samples did not differ significantly (P ≥ .05). Taste and alcohol exhibited significant model (P < .05), and were fitted into regression models. Pineapple has been found suitable for wine production. Using Saccharomyces cerevisiae var cerevisiae concentration of 6 %v/v and total soluble solids of 25 °Brix is suitable for production of pineapple wine and should be adopted.

scholarly journals Fruit quality of wild, sweet and yellow passion fruit genotypes in Distrito Federal, Brazil

2021 ◽  
Vol 37 ◽  
pp. e37064
Author(s):  
Daiane da Silva Nóbrega ◽  
Ana Clara Nunes Mendes ◽  
José Ricardo Peixoto ◽  
Michelle Souza Vilela ◽  
Fábio Gelape Faleiro ◽  
...  
Keyword(s):  
Fruit Quality ◽  
Titratable Acidity ◽  
Passion Fruit ◽  
Soluble Solids ◽  
Width Ratio ◽  
Total Soluble Solids ◽  
Length Width ◽  
Fruit Mass ◽  
Yellow Passion Fruit

Despite the importance of passion fruit for the Brazilian fruit market, there are still many agronomic and fruit quality problems to be solved, in order to increase this crop performance. The objective of this study was to evaluate the quality of twelve genotypes of wild, sweet and yellow passion fruit, aiming to identify promising materials considering fruit quality, in Federal District, Brazil. An experiment was carried out at the Água Limpa Farm of the Universidade de Brasília (UnB) from 2016 to 2018, in a randomized block design, with 12 treatments, 4 replicates and 6 plants/plot. At the harvesting time, six fruits per plot were randomly collected for the following physicochemical analysis: fruit mass, pulp mass with and without seeds, length/longitudinal diameter, width/transverse diameter, length/width ratio, husk thickness, predominant color of the pulp (L*, C*, h*), number of seeds, seed size, total soluble solids content, total titratable acidity, total soluble solids/total titratable acidity ratio and pH. High heritability values ​​and relation of genetic/environment variation coefficients ratio were observed for most of the characteristics evaluated. The genotypes of yellow passion fruit MAR20#21 P2 x FB 200 P1 R2 and MAR20#19 ROXO R4 x ECRAM P3 R3 showed the best characteristics of fruit mass and pulp mass with seed. All the genotypes studied showed values ​​of total soluble solids above 11ºBrix. Positive and significant correlation was observed between fruit mass and length/width ratio, indicating that oblong fruits have higher fruit mass.

scholarly journals Postharvest Quality of Beetroots Grown Under Different Irrigation Depths and Ascorbic Acid Doses

2019 ◽  
Vol 11 (16) ◽  
pp. 180
Author(s):  
Anderson Carlos de Melo Gonçalves ◽  
Toshik Iarley da Silva ◽  
José Sebastião de Melo Filho ◽  
Joana Gomes de Moura ◽  
Leonardo Vieira de Sousa ◽  
...  
Keyword(s):  
Electrical Conductivity ◽  
Ascorbic Acid ◽  
Polynomial Regression ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Postharvest Quality ◽  
Mineral Matter ◽  
Total Soluble Solids ◽  
Randomized Design

Beetroot (Beta vulgaris L.) is a culture of great demand in Brazil due to its high nutritional value. However, water availability is a determining factor on its production. An alternative to reduce the damage caused by water stress is to apply organic solutes, such as ascorbic acid. The purpose hereof was to evaluate the postharvest quality of beetroots grown under different irrigation depths and ascorbic acid doses. The experiment was carried out in the Human, Social, and Agricultural Center&rsquo;s Postharvest Physiology and Technology Laboratory of the Federal University of Para&iacute;ba, Bananeiras, Para&iacute;ba, Brazil, in a completely randomized design with five doses of ascorbic acid (0.00, 0.29, 1.00, 1.71, and 2.00 mM) and five irrigation depths (40.0%, 51.6%, 80.0%, 108.4%, and 120.0% of the evapotranspiration), combined according to each Box Central Compound experimental matrix, totaling nine treatments with five repetitions. The variables total soluble solids, electrical conductivity, hydrogenation potential, titratable acidity, total soluble solids and titratable acidity ratio, moisture, dry matter, and mineral matter were evaluated. The data were submitted for analysis of variance and polynomial regression. There was a significant interaction between the irrigation depths and the ascorbic acid doses in every variable, except for electrical conductivity and mineral matter. The postharvest characteristics of beetroots improved with applications of ascorbic acid doses in the thinner irrigation depths. The greatest dose of ascorbic acid (2 mM) in the thinner irrigation depth (40%) increases the postharvest quality of beet tuberous roots.

scholarly journals Analysis of Possibility to Apply Preharvest 1-Methylcyclopropene (1-MCP) Treatment to Delay Harvesting of Red Jonaprince Apples

2020 ◽  
Vol 12 (11) ◽  
pp. 4575 ◽  
Author(s):  
Kazimierz Tomala ◽  
Marek Grzęda ◽  
Dominika Guzek ◽  
Dominika Głąbska ◽  
Krystyna Gutkowska
Keyword(s):  
Titratable Acidity ◽  
Soluble Solids ◽  
Low Oxygen ◽  
Apple Trees ◽  
Ethylene Receptors ◽  
Total Soluble Solids ◽  
Ripening Process ◽  
Ethylene Content ◽  
Apple Ripening

The production of Red Jonaprince cultivar is increasing, but the quality of apples is still challenging. Therefore, various options may be used including 1-Methylcyclopropene (1-MCP) application, as it influences ethylene receptors and blocks them, resulting in the possibility of delaying harvesting. The preharvest application of 1-MCP has not been studied so far for this cultivar but for other ones it has been successful, as it is based on the understanding of the natural apple ripening process. The study aimed to analyze the possibility of applying a 1-MCP treatment in the preharvest period for Red Jonaprince apples. The study was conducted based on a comparison of apples from two groups of Red Jonaprince apple trees (4 years) cultivated in an experimental orchard, where for one of them 1-MCP was applied in the preharvest period (HarvistaTM; 150 g per ha; 20 September—12 days before the optimum harvesting window (OHW)). For both groups, the apples were studied twice, for harvesting in the OHW (2 October) and for delayed harvesting (24 October). The harvested fruits were stored in an Ultra Low Oxygen chamber (ULO; 1.2% CO2, 1.2% O2) until May. They were analyzed before storage (preharvest) five times (20 September–24 October) and after storage (postharvest) three times (20 March–18 May). The following parameters were included: firmness, total soluble solids (TSS) content, titratable acidity (TA). For the preharvest period, the parameters also included internal ethylene content (IEC), starch index, and Streif index. For the preharvest period, significant differences associated with the 1-MCP treatment (p ≤ 0.05) were observed for the IEC (lower results for apples treated for 4th and 5th assessment), TA (higher results), and Streif index (higher results). Meanwhile, for firmness, TSS, and starch index for the majority of measurements there were no differences (p > 0.05). For the postharvest period, significant differences associated with 1-MCP treatment (p ≤ 0.05) were observed for firmness (higher results) and TA (higher results) both for OHW and delayed harvesting. It was concluded that a preharvest 1-MCP treatment allowed delayed harvesting and reduced the quality deterioration during the ULO storage of Red Jonaprince apples.

scholarly journals Effect of nano zeolite and potassium permanganate on shelf life and quality of cut apple

2015 ◽  
Vol 9 (2) ◽  
pp. 55-60 ◽  
Author(s):  
Fereshteh Khosravi ◽  
Mahdyeh Khosravi ◽  
Elnaz Pourseyedi
Keyword(s):  
Weight Loss ◽  
Shelf Life ◽  
Potassium Permanganate ◽  
Life Sciences ◽  
Titratable Acidity ◽  
Fruit Weight ◽  
Soluble Solids ◽  
Total Soluble Solids ◽  
Preserved Fruit

In the present study the extended storage life of cut apples (Red Delicious) examined using nano zeolite particles and potassium permanganate. Titratable acidity, total soluble solids, pH and weight loss was measured .Visual observations of fruits during storage were investigated. The results showed that pH, soluble solids and fruit weight loss has increased during storage. The acidity of fruits stored with nano zeolite was less decreased as compared with potassium permanganate. The growth of moulds on preserved fruit with nano zeolite was much less after 10 days of storage as compared with potassium permanganate.DOI: http://dx.doi.org/10.3126/ijls.v9i2.12050 International Journal of Life Sciences 9 (2) : 2015; 55-60

scholarly journals Quality of unprocessed cooled fresh coconut water manually extracted by street vendors

2018 ◽  
Vol 84 (0) ◽  
Author(s):  
Karoline Soares ◽  
Daniela Morais ◽  
Vilson Góis ◽  
Jean Silva ◽  
Antônio Costa ◽  
...  
Keyword(s):  
Titratable Acidity ◽  
Well Being ◽  
Coconut Water ◽  
Soluble Solids ◽  
Microbiological Analysis ◽  
Street Vendors ◽  
Total Soluble Solids ◽  
Total Titratable Acidity ◽  
Fresh Coconut

ABSTRACT: Coconut water is a versatile beverage that is rich in nutrients, has few calories, and presents functional and therapeutic characteristics, improving the well-being and health of consumers. However, the growth of deteriorating microorganisms is facilitated by its water activity and high nutrient content; and when combined with improper handling, this product may become a carrier of foodborne diseases. Therefore, the objective of this work was to evaluate the quality of unprocessed cooled fresh coconut water manually extracted by street vendors. Twelve samples of coconut water were collected and subjected to physicochemical (total titratable acidity, pH, and total soluble solids) and microbiological (mesophilic, and psychrotrophic microorganisms, molds, yeasts, and thermotolerant and total coliforms) analyses. The physicochemical analysis showed variations of 4.3-5.4 for pH, 0.01-0.03 for total titratable acidity, and 2.8-6.3 for total soluble solids. The microbiological analysis showed high contamination in the samples by deteriorating microorganisms, with 58% of the samples contaminated with pathogenic microorganisms. Therefore, regular use of good hygiene practices for handling manually extracted coconut water is necessary to physicochemically and microbiologically standardize this product. Thus, ensuring the quality of the coconut water when it is manually extracted by street vendors and trade as an unprocessed, cooled, and fresh beverage and consequently minimize consumer’s health risks.

Effect of Preharvest Application of Silicon and Saline Water on Postharvest Quality of Beet (Beta vulgaris L.)

2019 ◽  
pp. 1-9
Author(s):  
José Sebastião de Melo Filho ◽  
Toshik Iarley da Silva ◽  
Ygor Henrique Leal ◽  
Ana Gabriela Sousa Basilio ◽  
Mário Leno Martins Véras ◽  
...  
Keyword(s):  
Irrigation Water ◽  
Saline Water ◽  
Titratable Acidity ◽  
Dry Mass ◽  
Soluble Solids ◽  
Postharvest Quality ◽  
Total Soluble Solids ◽  
Randomized Design ◽  
Saline Waters

Beet is one of the vegetables richest in nutrient (bioactive compounds, folic acid and potassium). However, there are few studies on postharvest quality from the crop under irrigation conditions with saline waters, and because of that, the objective of this study was to evaluate effect of saline waters and silicon application in the preharvest on physicochemical quality of the beet. Two experiments were conducted with the objective of evaluating two forms of silicon application: via foliar (experiment 1) and via soil (experiment 2) about its influence in mitigating salt stress. In both experiments was adopted a randomized design with blocks in a 5 x 5 factorial, referring to five levels of electrical conductivity of the irrigation water (ECw): (0.5, 1.3, 3.25, 5.2 and 6.0 dS m-1) five doses of silicon (0.00; 2.64; 9.08; 15.52 and 18.16 mL L-1), they were combined according to the experimental matrix Central composite of Box totaling 10 treatments, with four replicates and three plants per plot. After harvesting, 70 days after transplanting, the following characteristics were evaluated: bulb dry mass, pH, titratable acidity (TA), total soluble solids (TSS), TSS/TA ratio and ash.  There was a significant effect for the salinity x silicon (Si) interaction applied via soil to the dry matter mass and titratable acidity. The electrical conductivities of irrigation water (ECw) and Si doses via leaf and soil influenced significantly for analyzed variables, except pH, total soluble solids, TSS/TA ratio, ash and titratable acidity, which were not influenced by ECw and nor by the doses of Si via soil and foliage. Irrigation with water of 6.0 dS m-1 promotes better quality beet tuber. The fertilization on preharvest with silicon via soil or foliage improved postharvest quality of beet.

scholarly journals A Five-year Study on the Effect of Cluster Thinning and Harvest Date on Yield, Fruit Composition, and Cold-hardiness of ‘Vidal Blanc’ (Vitis spp.) for Ice Wine Production

HortScience ◽  
2013 ◽  
Vol 48 (11) ◽  
pp. 1358-1362 ◽  
Author(s):  
Imed Dami ◽  
Said Ennahli ◽  
David Scurlock
Keyword(s):  
Cold Hardiness ◽  
Titratable Acidity ◽  
Harvest Date ◽  
Soluble Solids ◽  
Wine Production ◽  
Total Soluble Solids ◽  
Fruit Composition ◽  
Commercial Harvest ◽  
Cluster Thinning ◽  
Ice Wine

The aim of this 5-year study was to investigate the influence of cluster thinning (CT) and harvest date on yield components, fruit composition, and bud cold-hardiness in ‘Vidal blanc’ (Vitis spp.) grapevines grown in northern Ohio. It is unknown whether delaying harvest of ‘Vidal blanc’ for ice wine production would impact negatively winter-hardiness. ‘Vidal blanc’ grapevines were cluster-thinned at post-fruit set [Eichhorn-Lorenz (EL) Stage 31] to two crop levels by retaining 40 (CT40) and 60 (CT60) clusters per vine. Each crop level was harvested at three dates: normal harvest (HD1), fall harvest (HD2) after the first killing frost, and winter harvest (HD3) corresponding to the typical commercial harvest for ice wine. Generally, and as expected, the high crop level CT60 increased crop weight and cropload and decreased total soluble solids and pH. Delayed harvest decreased crop weight, cluster weight, berry weight, and titratable acidity but increased total soluble solids and pH. Bud cold-hardiness, determined by thermal analysis and after two freezing events, was not different among all treatments. It was concluded that CT40 produced optimum vine size and cropload thus balanced vines. Furthermore, delaying fruit harvest in ‘Vidal blanc’ for ice wine production in the northeastern United States and Canada improves fruit composition but has no adverse influence on bud cold-hardiness.

scholarly journals Physicochemical Characterization and Functional Potential of Phaseolus vulgaris L. and Phaseolus coccineus L. Landrace Green Beans

Agronomy ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 803
Author(s):  
Elia Nora Aquino-Bolaños ◽  
Alma Karina Garzón-García ◽  
Jimena Esther Alba-Jiménez ◽  
José Luis Chávez-Servia ◽  
Araceli Minerva Vera-Guzmán ◽  
...  
Keyword(s):  
Antioxidant Activity ◽  
Physicochemical Characterization ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Total Phenolic ◽  
Green Beans ◽  
Total Sugars ◽  
Total Soluble Solids ◽  
Color Parameters

The green bean is an important crop worldwide, because it is rich in protein, dietary fiber, vitamins, and minerals, as well as bioactive compounds that provide it with important functional properties; however, the composition of many landraces is still unknown. The purpose of this project was to characterize Phaselus vulgaris and coccineus L. landrace green beans on pH, titratable acidity, total soluble solids, total sugars, color parameters, total phenols, monomeric anthocyanins, and in vitro antioxidant activity (DPPH and FRAP). Regarding the content of total sugars, differences were registered between both species, as opposed to results observed in total soluble solids. Color parameters showed higher reddish tones for P. vulgaris landraces, though P. coccineus had a higher total phenolic content, especially the reddish landraces, which correlated directly to a higher antioxidant activity by DPPH and FRAP. In the protein content, the species P. vulgaris registered the highest content. These results could contribute to a greater use and even promote the genetic improvement of the outstanding pods that serve as one of the main food products in rural regions for higher benefits.

scholarly journals High-density linkage map construction and identification of loci regulating fruit quality traits in blueberry

2021 ◽  
Vol 8 (1) ◽  
Author(s):  
Molla F. Mengist ◽  
Hamed Bostan ◽  
Elisheba Young ◽  
Kristine L. Kay ◽  
Nicholas Gillitt ◽  
...  
Keyword(s):  
Linkage Map ◽  
Fruit Quality ◽  
Titratable Acidity ◽  
Fruit Weight ◽  
High Density ◽  
Soluble Solids ◽  
Quality Traits ◽  
Total Soluble Solids ◽  
Fruit Quality Traits ◽  
High Density Linkage Map

AbstractFruit quality traits play a significant role in consumer preferences and consumption in blueberry (Vaccinium corymbosum L). The objectives of this study were to construct a high-density linkage map and to identify the underlying genetic basis of fruit quality traits in blueberry. A total of 287 F1 individuals derived from a cross between two southern highbush blueberry cultivars, ‘Reveille’ and ‘Arlen’, were phenotyped over three years (2016–2018) for fruit quality-related traits, including titratable acidity, pH, total soluble solids, and fruit weight. A high-density linkage map was constructed using 17k single nucleotide polymorphisms markers. The linkage map spanned a total of 1397 cM with an average inter-loci distance of 0.08 cM. The quantitative trait loci interval mapping based on the hidden Markov model identified 18 loci for fruit quality traits, including seven loci for fruit weight, three loci for titratable acidity, five loci for pH, and three loci for total soluble solids. Ten of these loci were detected in more than one year. These loci explained phenotypic variance ranging from 7 to 28% for titratable acidity and total soluble solid, and 8–13% for pH. However, the loci identified for fruit weight did not explain more than 10% of the phenotypic variance. We also reported the association between fruit quality traits and metabolites detected by Proton nuclear magnetic resonance analysis directly responsible for these fruit quality traits. Organic acids, citric acid, and quinic acid were significantly (P < 0.05) and positively correlated with titratable acidity. Sugar molecules showed a strong and positive correlation with total soluble solids. Overall, the study dissected the genetic basis of fruit quality traits and established an association between these fruit quality traits and metabolites.

scholarly journals Characterization of maturity and quality of Brazilian apirenic grapes in the São Francisco river Valley

2012 ◽  
Vol 32 (1) ◽  
pp. 26-33 ◽  
Author(s):  
Robson de Jesus Mascarenhas ◽  
Silvanda de Melo Silva ◽  
Maria Auxiliadora Coêlho de Lima ◽  
Rejane Maria Nunes Mendonça ◽  
Heinz Johann Holschuh
Keyword(s):  
Titratable Acidity ◽  
Soluble Solids ◽  
Minimum Diameter ◽  
Red Grapes ◽  
Berry Size ◽  
Large Clusters ◽  
Small Clusters ◽  
Light Green

The objective of this study was to characterize and correlate maturity and quality of the first varieties of Brazilian seedless grapes 'BRS Clara', 'BRS Linda', 'BRS Morena', and 'Advanced Selection 8' compared with the American variety 'Crimson Seedless' in compliance with the Brazilian Normative/2002 and export standards Advanced Selection 8' is dark reddish, has large clusters, and is a very large ellipsoid berry; 'BRS Morena' is black with medium sized clusters and large berry shaped as ellipsoid to globoid; 'BRS Linda' is light green and has large sized clusters; 'Crimson' is pink and has small clusters with berries varying from medium to large sizes and ellipsoid shaped; and 'BRS Clara' is green yellowish has medium sized clusters and small berry of elongated ellipsoid shape. All varieties evaluated meet the standard for domestic market established as berry size minimum diameter 12 mm. 'BRS Clara' does not meet the export requirements of diameter. Berries of the red grapes 'BRS Morena' and 'Crimson Seedless' are firmer. The pH, titratable acidity, and soluble solids meet the official standards. Larger clusters are less acidic and present higher soluble solids/titratable acidity ratios implying that they are the sweetest type when ripe.

Sign in / Sign up

Export Citation Format

Share Document