scholarly journals Comparative Studies on Dimensional, Gravimetric and Frictional Properties of Chhattisgarh Popular Paddy Varieties for Suitability of Flaked Rice (Paha)

2020 ◽  
pp. 145-151
Author(s):  
Rahul Dahare ◽  
Tankesh Kumar Nishad ◽  
Bhupendra Sahu
Keyword(s):  
Aspect Ratio ◽  
Bulk Density ◽  
Average Length ◽  
Geometric Mean ◽  
Angle Of Repose ◽  
True Density ◽  
Frictional Properties ◽  
Mean Diameter ◽  
Length Width ◽  
Different Characteristics

The present study on different characteristics of some selected varieties of paddy was undertaken to study dimensional, gravimetric and frictional properties of paddy. The physical properties such as average length, width, thickness, geometric mean diameter, aspect ratio, sphericity, volume, surface area, L/B ratio, true density, bulk density, porosity, angle of repose and coefficient of friction on different surfaces of paddy varieties were measured to have an initial information of the input. All varieties have different dimensional properties, for the length of Rajeshwari, Durgeshwari and Mahamaya paddy variety 9.21 to 9.34 mm, for width 2.41 to 2.79 mm and for thickness 1.83 to 2.45 mm respectively. The geometric mean diameter and aspect ratio for Rajeshwari, Durgeshwari and Mahamaya paddy variety was observed 3.43 to 4.08 mm and 25.21 to 30.13% respectively. True density and bulk density of Rajeshwari, Durgeshwari and Mahamaya paddy variety were observed 1056.86 to 1350.43 kg/m3 and 580.18 to 695.77 kg/m3 respectively. The angle of repose of Rajeshwari, Durgeshwari and Mahamaya paddy variety was observed 42.23° to 48.51°.

scholarly journals Physical and engineering properties of BARI released three groundnut varieties

2020 ◽  
Vol 44 (4) ◽  
pp. 609-620
Author(s):  
MA Hoque
Keyword(s):  
Aspect Ratio ◽  
Geometric Mean ◽  
Angle Of Repose ◽  
Engineering Properties ◽  
True Density ◽  
Water Displacement ◽  
Mean Diameter ◽  
Length Width ◽  
Displacement Angle ◽  
Agricultural Machines

The knowledge of the physical characteristics of particles is essential for the designer of agricultural machines. The study was aimed to determine physical and engineering properties of three selected varieties of groundnuts cultivated in Bangladesh such as Dhaka-1, BARI Badam-8 and BARI Badam-9 at safe storage moisture content of 7.5%. One hundred groundnut pods and kernels were randomly selected and the length, width and thickness were measured using a vernier caliper. The geometric mean diameter, sphericity, aspect ratio was calculated using standard formula and measured values. Bulk density, true density, mass and porosity were found through direct weighing and water displacement. Angle of repose of pods and kernels was also measured on wood, glass and mild steel sheet surfaces. BARI Badam-9 had the highest pod geometric mean diameter and BARI Badam-8 had the highest kernel geometric mean diameter. Sphericity of groundnut pod was the highest for Dhaka-1. Surface area of pod and aspect ratio of both pod and kernel were the highest in BARI Badam-9. Porosity of the pod was the least for BARI Badam-8. Angle of repose of kernel varied on wood and glass. But it was similar for kernel on MS sheet for the varieties. This result will be useful to design and develop groundnut processing equipment for different varietal variability Bangladesh J. Agril. Res. 44(4): 609-620, December 2019

scholarly journals Physical Attributes and Modelling of Trans- Himalayan Seabuckthorn Berries

2017 ◽  
Vol 5 (3) ◽  
pp. 391-397 ◽  
Author(s):  
SWAPNIL G. JAISWAL ◽  
BHUSHAN R. DOLE ◽  
SANGRAM K. SATPATHY ◽  
S.N. NAIK
Keyword(s):  
Bulk Density ◽  
Surface Area ◽  
Geometric Mean ◽  
Polynomial Model ◽  
Angle Of Repose ◽  
True Density ◽  
North Eastern ◽  
Mean Diameter ◽  
Physical Attributes ◽  
In Trans

Seabuckthorn is a highly perishable fruit found in trans-Himalayan region and North-Eastern part of India. It has enormous nutritional and medicinal properties. Physical attributes of fruits play an important role in the design of machines to meet various harvest and post harvest operations. In the present study properties like dimensions, true density, bulk density, sphericity, porosity and angle of repose were measured and correlated with the mass of the fruit. In addition linear, polynomial, quadratic, logarithmic and exponential models were used for mass and surface area. The length, diameter, thousand berry weight, geometric mean diameter, arithmetic mean diameter, surface area, aspect ratio, angle of repose, sphericity, porosity, true density, bulk density, moisture content were found in the range of 6.5-7.5, 4.74-6.28, 362.67-910.14, 5.49-6.99, 6.17-6.24, 76.87-154.76, 72.81-83.73, 3.59-6.82, 65.84-90.47, 17.05-60.07, 647.19-1399.24, 453.81-725.88, 84.53-87.34 respectively. Polynomial model was suited to be best for mass with length and diameter. Polynomial model between surface area and geometric mean diameter gave highest R2 of 0.981.

Effect of moisture content on physical properties of cashew nut of different varieties

2016 ◽  
Vol 44 (2) ◽  
Author(s):  
Shrikant Baslingappa Swami ◽  
N.J. Thakor A.M. Gawai
Keyword(s):  
Moisture Content ◽  
Physical Properties ◽  
Bulk Density ◽  
Surface Area ◽  
Geometric Mean ◽  
Angle Of Repose ◽  
True Density ◽  
Cashew Nut ◽  
Mean Diameter ◽  
Effect Of Moisture

<p>The physical properties, viz., geometric diameter, surface area, sphericity, volume, bulk density, true density and angle of repose was measured for  four  cashew varieties <em>viz</em>., <em>Vengurle 1, Vengurle 3, Vengurle 4</em>  and <em>Vengurle 7</em> at different moisture content (15 to 87% db). For <em>Vengurle</em> 1 as the moisture content increased, the physical properties i.e., geometric mean diameter, volume, surface area, true density and angle of repose increased from 20.8 to 22.1 mm, 3485 to 4416 mm<sup>3</sup>, 1355 to 1540 mm<sup>2</sup>, 984 to 1030 kg m<sup>-3</sup> and 32 to 37˚, respectively. The sphericity and bulk density decreased from 74.2 to 71.4 per cent and 490 to 418 kg m<sup>-3</sup> respectively. For <em>Vengurle 3</em> geometric mean diameter, volume, surface area, true density and angle of repose increased from 27.2 to 28.6 mm, 7912 to 9169 mm<sup>3</sup>, 2320 to 2567 mm<sup>2</sup>, 1020 to 1048 kg m<sup>-3</sup> and 33 to 35.5˚, respectively. The sphericity and bulk density decreased from 75.5 to 75.2 per cent and 531 to 470 kg m<sup>-3</sup> respectively. For <em>Vengurle 4</em> the geometric mean diameter, volume, surface area, true density and angle of repose increased from 21.0 to 24.1mm, 3362 to 5113 mm<sup>3</sup>, 1391 to 1828 mm<sup>2</sup>, 970 to 1030 kg m<sup>-3</sup> and 32.5 to 38˚,  respectively. The sphericity and bulk density decreased from 65.8 to 66.8 per cent, 517 to 462 kg m<sup>-3</sup>, respectively. For <em>Vengurle 7</em> the geometric mean diameter, volume, surface area, true density and angle of repose increased from 24.2 to 24.9 mm, 5102 to 5547 mm<sup>3</sup>, 1840 to 1941 mm<sup>2</sup>, 998 to 1045 kg m<sup>-3</sup> and 33 to 38˚, respectively. The sphericity and bulk density decreased from 65.4 to 65.8 per cent, 518 to 438 kg m<sup>-3</sup>, respectively.</p>

scholarly journals Physical properties of cumin and caraway seeds

2013 ◽  
Vol 27 (4) ◽  
pp. 491-494 ◽  
Author(s):  
D. Zare ◽  
A. Bakhshipour ◽  
G. Chen
Keyword(s):  
Aspect Ratio ◽  
Moisture Content ◽  
Physical Properties ◽  
Bulk Density ◽  
Geometric Mean ◽  
Equivalent Diameter ◽  
True Density ◽  
Mean Width ◽  
Mean Diameter ◽  
Constant Moisture Content

Abstract Physical properties of cumin and caraway seeds were measured and compared at constant moisture content of 7.5% w.b. The average thousand mass of grain, mean length, mean width, mean thickness, equivalent diameter, geometric mean diameter, surface area, volume, sphericity, aspect ratio, true density, bulk density and porosity were measured for cumin and caraway. There are significant differences (p<0.01) in most physical properties of cumin and caraway, except porosity and sphericity

scholarly journals Physical Properties of Different Cultivar Local Glutinous rice (susu and siding) and Commercial Thai Cultivar

2021 ◽  
Author(s):  
Norzahirah Zainal ◽  
Rosnah Shamsudin
Keyword(s):  
Oryza Sativa ◽  
Aspect Ratio ◽  
Physical Properties ◽  
Bulk Density ◽  
Angle Of Repose ◽  
True Density ◽  
White Rice ◽  
Glutinous Rice ◽  
Length Width ◽  
Waxy Rice

Glutinous rice (Oryza Sativa var. glutinosa) is known as waxy rice or sticky rice and it has an opaque and small size grain cultivar distinct from common white rice. In outlining the equipment for processing, storage, sorting, sizing and other post-harvest equipment the particular of their physical properties is important. Two different cultivar of local glutinous rice susu and siding were evaluated in this study. For susu cultivar, the average of length, width, and thickness were 6.63mm, 1.88mm, and 1.50mm respectively. The corresponding values were 6.24mm, 1.98mm, and 1.48mm for siding cultivar. For susu cultivar, the average of aspect ratio, sphericity, volume, surface area, bulk density, true density, porosity, 1000 weight kernel, and angle of repose were 0.28, 0.40%, 9.81mm3, 19.02mm2, 800.54 kg/m3, 1500.36 kg/m3, 46.65%, 18.88g, and 39.45°. Thecorresponding values were 0.32, 0.42%, 10.25mm3, 19.45mm2, 772.73 kg/m3, 1229.51 kg/m3, 37.15%, 17.04g and 40.08° for siding cultivar. Thus, the objective of this study is to compare the physical properties of two different local cultivars aid in designing the rice processing equipment.

scholarly journals Comparison of the physical properties between Malaysian and Thai Rice

2021 ◽  
Author(s):  
Parichart Sathongpan ◽  
Rosnah Shamsudin ◽  
Jaturapatr Varith ◽  
Nur Farhana Abd Rahman
Keyword(s):  
Aspect Ratio ◽  
Physical Properties ◽  
Bulk Density ◽  
Surface Area ◽  
Angle Of Repose ◽  
Physical Parameters ◽  
True Density ◽  
Breadth Ratio ◽  
Length Width

Rice is a staple food in the world market, especially in the Asian region. In each country, the characteristics of rice will be different in terms of shape, grade and size. The quality of rice depends largely that demonstrate the quality of that rice species. At present, information on rice varieties is still limited regarding the physical properties of Malaysian and Thai rice. Therefore, it is important to compare rice cultivars based on origin. The objective of this research is to determine and compare the physical properties of Malaysian and Thai rice. 1 kilogram of Malaysian and Thai rice were each processed into powder by way of grinding and were then prepared for physicochemical measurement by sieving the produced rice powders with a size of 2mm to get rid of foreign objects. The physical parameters measured were length, width, length/breadth ratio, thickness, density, grain shape, surface area, bulk density, true density, porosity, sphericity, aspect ratio, thousand weight kernels angle of repose, colour (L, a*, b*) and hardness. The results of the study showed no significant differences (p>0.05) in terms of length, width, length/breadth ratio, true density, porosity, sphericity, aspect ratio, angle of repose, Lightness (L) and b*. However, there is a significant variation (p < 0.05) between Malaysian and Thai rice in terms of thickness, surface area, bulk density, thousand weight kernels, colour (a*) and hardness parameters. The evaluation of the quality of Malaysian and Thai rices can be a guide or reference for the grading and sorting processing sectors. 

scholarly journals Some Physical Properties of Palmyrah Palm (Borassus flabellifer L.) Fruits

2021 ◽  
pp. 18-25
Author(s):  
P. C. Vengaiah ◽  
S. Kaleemullah ◽  
M. Madhava ◽  
A. Mani ◽  
B. Sreekanth
Keyword(s):  
Aspect Ratio ◽  
Moisture Content ◽  
Mild Steel ◽  
Physical Properties ◽  
Bulk Density ◽  
Geometric Mean ◽  
Static Friction ◽  
Angle Of Repose ◽  
Average Mass ◽  
The Individual

Some physical properties of palmyrah fruit were investigated in this study. The average values of major, medium, minor and geometric mean diameters of fresh whole palmyrah fruit were 11.54,10.45, 9.85 and 10.64 cm respectively at 47.34 % (w.b) moisture content whereas that of palmyrah nut were 8.59, 7.35, 4.99 and 6.79 cm respectively at 8% (w.b) moisture content. Sphericity, surface area and aspect ratio were found to be 91.94%, 359.17 cm2 and 0.90 for fruit and whereas that of nut were 79.19%, 145.16 cm2 and 0.86 respectively. The average mass of the individual palmyrah fruit and nut was 927.78 and 248.10 g whereas bulk density was 525.92 and 693.0 kg/m3 respectively. The coefficient of static friction on mild steel, glass and plywood surfaces were 0.27, 0.21 and 0.25 for palmyrah fruit and 0.36, 0.28 and 0.27 for nut respectively. The angle of repose of palmyrah fruit and nut were 30.77 and 44.03 respectively.

scholarly journals Some Bio-Technical Properties of Flax Seeds, Fennel Seeds and Harmal Seed Capsules

2020 ◽  
pp. 222-232
Author(s):  
Gungor YILMAZ ◽  
Ebubekir ALTUNTAS
Keyword(s):  
Bulk Density ◽  
Static Friction ◽  
Angle Of Repose ◽  
True Density ◽  
Displacement Method ◽  
Rubber Friction ◽  
Length Width ◽  
Technical Properties ◽  
Flax Seeds ◽  
Liquid Displacement

Some bio-technical properties of flax seeds, fennel seeds, and harmal seed capsules were determined. The size dimensions (length, width, and thickness) of flax seeds and fennel seeds were as 4.31 mm, 2.28 mm, 0.87 mm; 6.93 mm, 2.13 mm, 1.75 mm, respectively. The diameter and length for harmal seed capsules were 9.07 mm and 6.65 mm, respectively. The true density (ρt) was determined using the liquid displacement method, and the bulk density (ρb) was determined using the hectolitre tester. The bulk density for flax seeds, fennel seeds, and harmal seed capsules were determined as 384.3 kg m-3, 270.5 kg m-3 and 201.5 kg m-3, while, true density was found as 1256.5 kg m-3, 664.6 kg m-3, 936.2 kg m-3 for flax seeds, fennel seeds, and harmal seed capsules, respectively. The sphericity of for flax seeds, fennel seeds and harmal seed capsules were obtained as 0.47, 0.43, 0.72, respectively. The angle of repose was obtained as 13.84º, 17.35º, 29.94º for flax seeds, fennel seeds, and harmal seed capsules, respectively. The rubber friction surface has given the highest static friction coefficient for flax seeds, fennel seeds, and harmal seed capsules.

Some Physical and Mechanical Properties of Kiwifruit

2007 ◽  
Vol 3 (6) ◽  
Author(s):  
Seyed Mohammad Ali Razavi ◽  
Maryam BahramParvar
Keyword(s):  
Surface Area ◽  
Geometric Mean ◽  
Apparent Volume ◽  
Adhesive Force ◽  
Arithmetic Mean ◽  
True Density ◽  
Mean Diameter ◽  
Length Width ◽  
Static Coefficient Of Friction ◽  
Static Coefficient

In this paper, the physical properties such as length, width, thickness, geometric mean diameter, arithmetic mean diameter, mass, true volume, apparent volume, true density, bulk density, porosity, sphericity, surface area, shell ratio, aspect ratio, static coefficient of friction and mechanical characteristics namely firmness, hardness, adhesiveness, adhesive force and total positive area in puncture test were determined for kiwifruit of the Hayward variety. These properties are necessary in the design of the equipment for harvesting, processing and transportation, separating and packing. The results showed that the length, width, thickness, arithmetic mean diameter, geometric mean diameter, sphericity and aspect ratio of kiwifruit varied from 55.5 to 82.3 mm, 46.8 to 54.8 mm, 41.5 to 52.4 mm, 49.8 to 60.99 mm, 49.56 to 59.28 mm, 71.95 to 90.48% and 62.67 to 89.20%, respectively. While the surface area determined by McCabe et al.'s and Jean & Ball's formula, and surface area measured by experimental method changed from 77.11 to 110.34 cm2, 48.74 to 95.95 cm2 and 83.29 to 108.71 cm2, respectively. The values of the fruit's true volume, apparent volume, true density, bulk density and porosity were between 85-120 cm3, 63.69-109.01 cm3, 940-1040 kg/m3, 544.73-572.17 kg/m3 and 39.70-45.5%, respectively. Furthermore, the unit mass and peel ratio of kiwifruits ranged from 75.18 to 135.32 g and 8.91 to 12.51%, respectively. On four different surfaces, namely plywood, galvanized iron sheet, glass and fiberglass, static coefficient of friction varied from 0.34 on glass to 0.49 against plywood. The average firmness, hardness, adhesiveness, adhesive force and total positive area of peeled fruits were 229.42 g, 367.49 g, 716.48 g.s, -34.2 g and 11933.5 g.s, respectively. Corresponding values for unpeeled samples obtained 403.38 g, 2081.2 g, -3175.32 g.s, -118 g and 35757.22 g.s, respectively.

Moisture Dependent Selected Engineering Properties of Deenanath Seeds in Relation to Development of Processing Machinery

2021 ◽  
Vol 58 (03) ◽  
pp. 250-261
Author(s):  
Sanjay Kumar Singh ◽  
Sheshrao Kautkar ◽  
P. K. Pathak ◽  
Bholuram Gurjar ◽  
Sunil Swami ◽  
...  
Keyword(s):  
Moisture Content ◽  
Physical Properties ◽  
Geometric Mean ◽  
Seed Mass ◽  
Correlation Coefficients ◽  
Engineering Properties ◽  
True Density ◽  
Linear Relationships ◽  
Mean Diameter ◽  
Length Width

Propagation of grasses through seeds is important in view of vigour and germination. Various grasses as Pennisetum pedicellatum Trin., Cenchrus ciliaris L., Chrysopogan fulvus have lower vigour and germination, due to which they need specific operations as defluffing, separation of true seeds, cleaning and grading by specific machines. In designing a machine for a specific use, physical properties and their behaviour with moisture play an important role. A study was conducted to assess the effect of moisture content at five levels [6.88 - 19.23 %, (d.b.)] on selected physical properties of defluffed Deenanath grass seed. The length, width, thickness, arithmetic mean diameter, and geometric mean diameter of defluffed Deenanath seed increased from 2.30 mm to 2.56 mm, 0.71 mm to 0.96 mm, 0.47 mm to 0.63 mm, 1.16 mm to 1.38 mm, and 0.90 mm to 1.15 mm, respectively, with increase in moisture content 6.88 % to 19.23 %. Bulk density, true density, and porosity decreased from 652.16 kg.m-3 to 585.78 kg.m-3, 852.63 kg.m-3 to 792.71 kg.m-3, and 25.62 % to 24.97 %, respectively, with increase in moisture content from 6.88 % to 19.23 per cent. The aspect ratio, sphericity, surface area, volume, and thousand-seed mass of the seed were in the range of 30.91 - 37.51 %, 0.39 - 0.45, 2.58 - 3.23 mm2 , 3.71 - 4.97 mm3 , and 0.480 - 0.523 g, respectively. Linear relationships with correlation coefficients higher than 0.90 were observed for the physical properties over the experimental range of moisture content.

Sign in / Sign up

Export Citation Format

Share Document