Impact of Enzymatic Degradation on the Material Properties of Poly(Ethylene Terephthalate)

With macroscopic litter and its degradation into secondary microplastic as a major source of environmental pollution, one key challenge is understanding the pathways from macro- to microplastic by abiotic and biotic environmental impact. So far, little is known about the impact of biota on material properties. This study focuses on recycled, bottle-grade poly(ethylene terephthalate) (r-PET) and the degrading enzyme PETase from Ideonella sakaiensis. Compact tension (CT) specimens were incubated in an enzymatic solution and thermally and mechanically characterized. A time-dependent study up to 96 h revealed the formation of steadily growing colloidal structures. After 96 h incubation, high amounts of BHET dimer were found in a near-surface layer, affecting crack propagation and leading to faster material failure. The results of this pilot study show that enzymatic activity accelerates embrittlement and favors fragmentation. We conclude that PET-degrading enzymes must be viewed as a potentially relevant acceleration factor in macroplastic degradation.

Static Compressive Behavior and Material Failure Mechanism of Trabecular Tantalum Scaffolds Fabricated by Laser Powder Bed Fusion-based Additive Manufacturing

Additively manufactured trabecular tantalum (Ta) scaffolds are promising bone repair materials for load-bearing applications due to their good pore interconnectivity. However, a thorough mechanical behavior evaluation is required before conducting animal studies and clinical research using these scaffolds. In this study, we revealed the compressive mechanical behavior and material failure mechanism of trabecular tantalum scaffolds by compression testing, finite element analysis (FEA), and scanning electron microscopy (SEM). Trabecular tantalum scaffolds with porosities of 65%, 75%, and 85% were fabricated by laser powder bed fusion-based additive manufacturing. Porosity has a significant effect on their compressive mechanical properties. As the porosity decreased from 85% to 65%, the compressive yield strength and elastic modulus increased from 11.9 MPa to 35.7 MPa and 1.1 GPa to 3.0 GPa, respectively. Compression testing results indicate that trabecular tantalum scaffolds demonstrate ductile deformation and excellent mechanical reliability. No macroscopic cracks were found when they were subjected to strain up to 50%. SEM observations showed that material failure results from tantalum strut deformation and fracture. Most microcracks occurred at conjunctions, whereas few of them appear on the struts. FEA-generated compressive stress distribution and material deformation were consistent with experimental results. Stress concentrates at strut conjunctions and vertical struts, where fractures occur during compression testing, indicating that the load-bearing capability of trabecular tantalum scaffolds can be enhanced by strengthening strut conjunctions and vertical struts. Therefore, additively manufactured trabecular tantalum scaffolds can be used in bone tissue reconstruction applications.

Application of the Electrochemical Permeation Method for Hydrogen Diffusion Coefficient Determination in Pipeline Steel 10G2

In this article, we conduct research on the effect of corrosion tests on the hydrogen diffusion process in gas steel in electrochemical permeability tests. This tests show that a long corrosion test time reduces the hydrogen diffusion coefficient by an order of magnitude, indicating the formation of aging defects in the steel. During operation, the diffusion coefficient decreases by two orders of magnitude, which also indicates the formation of a large number of defects in the steel. Consequently, based on the change in the diffusion coefficient in the material, it is possible to assess the degree of material failure.

A Multiphysics Peridynamic Model for Simulation of Fracture in Si Thin Films during Lithiation/Delithiation Cycles

Material failure is the main obstacle in fulfilling the potential of electrodes in lithium batteries. To date, different failure phenomena observed experimentally in various structures have become challenging to model in numerical simulations. Moreover, their mechanisms are not well understood. To fill the gap, here we develop a coupled chemo-mechanical model based on peridynamics, a particle method that is suitable for simulating spontaneous crack growth, to solve the fracture problems in silicon thin films due to lithiation/delithiation. The model solves mechanical and lithium diffusion problems, respectively, and uses a coupling technique to deal with the interaction between them. The numerical examples of different types of Si films show the advantage of the model in this category and well reproduce the fracture patterns observed in the experiments, demonstrating that it is a promising tool in simulating material failure in electrodes.