Method development and validation for simultaneous quantification of microcystin congeners in water

Background Microcystins (MCs) are secondary metabolites of cyanobacteria that are hepatotoxic to humans through the ingestion of cyanobacteria-contaminated water and accidental inhalation from lake activities. MCs with diverse congeners in water can be precisely quantified using online solid-phase extraction-ultra performance liquid chromatography coupled with tandem mass spectrometry (online-SPE UPLC–MS/MS). A method was developed and validated to simultaneously quantify eight different MCs (microcystin-RR, -LR, -YR, -WR, -LA, -LF, -LY, and -LW) in water using online-SPE UPLC–MS/MS. Results The method achieved the highest efficiency and sensitivity by selecting acetonitrile with 0.1% formic acid and water with 0.1% formic acid as the best mobile phase conditions. The linearity, accuracy, and precision were validated using matrix-mixed water with a leucine enkephalin internal standard. The limit of detection (LOD) was calculated using the signal-to-noise ratio of three passes of the daily water-surface inspection for MCs. This method showed both high sensitivity and high resolution for the separation of eight MC congeners with LODs ranging from 0.020 to 0.371 ng L–1 and limits of quantitation ranging from 0.066 to 1.24 ng L–1. The detection time was reduced to 11 min. Except for MC-RR (58.8% recovery at high concentration) and MC-WR (45.1% and 40.9% recoveries at medium and high concentrations, respectively), the recoveries of the other MCs ranged from 70 to 135%, and the relative standard deviation was less than 10%. Conclusion Eight different MCs in 12 water samples collected from Chaohu Lake, China, were analyzed. The sum of all MC congeners was calculated to range from 101 to 585 ng L–1 (less than the World Health Organization’s safe drinking water limit of 1 μg L–1 for MC-LR).

Method Development and Validation for Simultaneous Quantification of Microcystin Congeners in Water

Background: Microcystins, as secondary metabolites of cyanobacteria, are hepatotoxic to humans through the ingestion of cyanobacteria-contaminated water. Microcystins with diverse congeners in water can be precisely quantified using online solid phase extraction-ultra performance liquid chromatography-tandem mass spectrometry (online-SPE UPLC-MS/MS). A method was developed and validated to simultaneously quantify eight microcystin congeners in water using online-SPE UPLC-MS/MS.Results: The method achieved the highest efficiency and sensitivity by selecting acetonitrile with 0.1% formic acid and water with 0.1% formic acid as the best mobile phase conditions. Linearity, accuracy, and precision were validated on matrix-mixed water with the leucine enkephalin internal standard. The limit of detection calculated using the signal-to-noise ratio of 3 passed the surface water daily inspection for microcystins. Except for the lower recovery of individual substances at individual concentrations, the recoveries of the remaining microcystin congeners ranged from 70 to 130%, and the relative standard deviation was less than 10%.Conclusion: The method was used to analyze microcystins in 12 water samples collected from Chaohu Lake. The sum of all microcystin congeners ranged from 101 to 585 ng L-1 in water (<WHO drinking water safe limit of 1 μg L-1 for microcystin-LR).

Determination of Urinary Mycotoxin Biomarkers Using a Sensitive Online Solid Phase Extraction-UHPLC-MS/MS Method

In the course of assessing the human exposure to mycotoxins, biomarker-based approaches have proven to be important tools. Low concentration levels, complex matrix compositions, structurally diverse analytes, and the large size of sample cohorts are the main challenges of analytical procedures. For that reason, an online solid phase extraction-ultra high-performance liquid chromatography-tandem mass spectrometry (online SPE-UHPLC-MS/MS) method was developed, allowing for the sensitive, robust, and rapid analysis of 11 relevant mycotoxins and mycotoxin metabolites in human urine. The included spectrum of analytes comprises aflatoxin M1 (AFM1), altenuene (ALT), alternariol monomethyl ether (AME), alternariol (AOH), citrinin (CIT) and its metabolite dihydrocitrinone (DH-CIT), fumonisin B1 (FB1), ochratoxin A (OTA), and zearalenone (ZEN) as well as α- and β-zearalenol (α- and β-ZEL). Reliable quantitation was achieved by means of stable isotope dilution, except for ALT, AME and AOH using matrix calibrations. The evaluation of method performance displayed low limits of detection in the range of pg/mL urine, satisfactory apparent recovery rates as well as high accuracy and precision during intra- and interday repeatability. Within the analysis of Zimbabwean urine samples (n = 50), the applicability of the newly developed method was shown. In addition to FB1 being quantifiable in all analyzed samples, six other mycotoxin biomarkers were detected. Compared to the occurrence rates obtained after analyzing the same sample set using an established dilute and shoot (DaS) approach, a considerably higher number of positive samples was observed when applying the online SPE method. Owing to the increased sensitivity, less need of sample handling, and low time effort, the herein presented online SPE approach provides a valuable contribution to human biomonitoring of mycotoxin exposure.

Quantification of a mercapturate metabolite of the biocides methylisothiazolinone and chloromethylisothiazolinone (“M-12”) in human urine using online-SPE-LC/MS/MS

A first report on a urinary mercapturate metabolite of the biocides methylisothiazolinone and chloromethylisothiazolinone in urine samples of the general population.