Wind Turbine Fault Diagnosis by the Approach of SCADA Alarms Analysis

Wind farm operators are overwhelmed by a large amount of supervisory control and data acquisition (SCADA) alarms when faults occur. This paper presents an online root fault identification method for SCADA alarms to assist operators in wind turbine fault diagnosis. The proposed method is based on the similarity analysis between an unknown alarm vector and the feature vectors of known faults. The alarm vector is obtained from segmented alarm lists, which are filtered and simplified. The feature vector, which is a unique signature representing the occurrence of a fault, is extracted from the alarm lists belonging to the same fault. To mine the coupling correspondence between alarms and faults, we define the weights of the alarms in each fault. The similarities is measured by the weighted Euclidean distance and the weighted Hamming distance, respectively. One year of SCADA alarms and maintenance records are used to verify the proposed method. The results show that the performance of the weighted Hamming distance is better than that of the weighted Euclidean distance; 84.1% of alarm lists are labeled with the right root fault.

Small Farmers’ Use of Social Media and Other Channels for Marketing their Agricultural Products

We examined small farmers’ use of and preference for different channels for marketing agricultural products and explored differences by gender, age group, and education level. Farmers markets and social media were preferred channels, with participants under age 55 being more likely than those 55 and over to prefer and use social media and agree that social media would be useful for promoting products and increasing sales. While selling via social media could provide a larger market, one challenge is that the average age of Mississippi farm operators is 59. Therefore, Extension must consider multiple approaches for delivering training on marketing.

Three-Dimensional LiDAR Wake Measurements in an Offshore Wind Farm and Comparison with Gaussian and AL Wake Models

Huaneng Rudong 300 MW offshore wind farm project is located in eastern China. The wake effect is one of the major concerns for wind farm operators, as all 70 units are plotted in ranks, and the sea surface roughness is low. This paper investigated the wake intensity by combining a field test and a numerical simulation. To carry out further yaw optimization, a Gaussian wake model was adopted. Firstly, a 3D Light Detection and Ranging device (LiDAR) was used to capture the features in both horizontal and vertical directions of the wake. It indicated that Gaussian wake model can precisely predict the characteristics under time average and steady state in the wind farm. The predicted annual energy production (AEP) of the whole wind farm by the Gaussian model is compared with the calculation result of the actuator line (AL)-based LES method, and the difference between the two methods is mostly under 10%.

Fatigue Stress Estimation for Submerged and Sub-Soil Welds of Offshore Wind Turbines on Monopiles Using Modal Expansion

The design of monopile foundations for offshore wind turbines is most often driven by fatigue. With the foundation price contributing to the total price of a turbine structure by more than 30%, wind farm operators seek to gain knowledge about the amount of consumed fatigue. Monitoring concepts are developed to uncover structural reserves coming from conservative designs in order to prolong the lifetime of a turbine. Amongst promising concepts is a wide array of methods using in-situ measurement data and extrapolating these results to desired locations below water surface and even seabed using models. The modal decomposition algorithm is used for this purpose. The algorithm obtains modal amplitudes from acceleration and strain measurements. In the subsequent expansion step these amplitudes are expanded to virtual measurements at arbitrary locations. The algorithm uses a reduced order model that can be obtained from either a FE model or measurements. In this work, operational modal analysis is applied to obtain the required stress and deflection shapes for optimal validation of the method. Furthermore, the measurements that are used as input for the algorithms are constrained to measurements from the dry part of the substructure. However, with subsoil measurement data available from a dedicated campaign, even validation for locations below mud-line is possible. After reconstructing strain history in arbitrary locations on the substructure, fatigue assessment over various environmental and operational conditions is carried out. The technique is found capable of estimating fatigue with high precision for locations above and below seabed.

Supervisory Power Coordination Scheme to Mitigate Power Curtailment in the Application of a Microgrid

There are cases where the output of renewable eappennergy (RE) is curtailed due to an increase in the share of RE. Typically, wind power (WP) is curtailed due to oversupply and low loads at midnight. However, there are cases where the output of WP is limited during the daytime due to the increase in the share of photovoltaics (PV). In the current electricity market, as the share of PV is increased, the curtailments of WP will be increased further, which will add to the difficulties experienced by wind farm operators. This paper proposes a supervisory power coordination scheme. The main purposes are to prevent the penetration of extra power from REs into the grid; thus, the curtailments can be prevented. In order to make it feasible, the proposed scheme is to design a grid-connected microgrid system to be operated only in response to loads and virtual power plant (VPP) requests. The effectiveness of the proposed scheme was verified by simulation studies conducted in the MATLAB/Simulink environment. The verification was conducted based on the voltage criteria, such as the AC voltage regulation between ±6% of the rated AC voltage, the DC voltage regulation between ±10% of the rated DC voltage, the power balance according to variations in the loads, and VPP requests for power. The simulation showed that the proposed scheme is feasible and justifiable, not only to mitigate the power curtailment problem but also to apply different system configurations.

Anomaly Detection on Data Streams for Smart Agriculture

Smart agriculture technologies are effective instruments for increasing farm sustainability and production. They generate many spatial, temporal, and time-series data streams that, when analysed, can reveal several issues on farm productivity and efficiency. In this context, the detection of anomalies can help in the identification of observations that deviate from the norm. This paper proposes an adaptation of an ensemble anomaly detector called enhanced locally selective combination in parallel outlier ensembles (ELSCP). On this basis, we define an unsupervised data-driven methodology for smart-farming temporal data that is applied in two case studies. The first considers harvest data including combine-harvester Global Positioning System (GPS) traces. The second is dedicated to crop data where we study the link between crop state (damaged or not) and detected anomalies. Our experiments show that our methodology achieved interesting performance with Area Under the Curve of Precision-Recall (AUCPR) score of 0.972 in the combine-harvester dataset, which is 58.7% better than that of the second-best approach. In the crop dataset, our analysis showed that 30% of the detected anomalies could be directly linked to crop damage. Therefore, anomaly detection could be integrated in the decision process of farm operators to improve harvesting efficiency and crop health.

Optimal Sizing of Energy Storage System for Operation of Wind Farms Considering Grid-Code Constraints

Transmission system operators impose several grid-code constraints on large-scale wind farms to ensure power system stability. These constraints may reduce the net profit of the wind farm operators due to their inability to sell all the power. The violation of these constraints also results in an imposition of penalties on the wind farm operators. Therefore, an operation strategy is developed in this study for optimizing the operation of wind farms using an energy storage system. This facilitates wind farms in fulfilling all the grid-code constraints imposed by the transmission system operators. Specifically, the limited power constraint and the reserve power constraint are considered in this study. In addition, an optimization algorithm is developed for optimal sizing of the energy storage system, which reduces the total operation and investment costs of wind farms. All parameters affecting the size of the energy storage systems are also analyzed in detail. This analysis allows the wind farm operators to find out the optimal size of the energy storage systems considering grid-code constraints and the local information of wind farms.

Quantification of the Information Loss Resulting from Temporal Aggregation of Wind Turbine Operating Data

SCADA operating data are more and more used across the wind energy domain, both as a basis for power output prediction and turbine health status monitoring. Current industry practice to work with this data is by aggregating the signals at coarse resolution of typically 10-min averages, in order to reduce data transmission and storage costs. However, aggregation, i.e., downsampling, induces an inevitable loss of information and is one of the main causes of skepticism towards the use of SCADA operating data to model complex systems such as wind turbines. This research aims to quantify the amount of information that is lost due to this downsampling of SCADA operating data and characterize it with respect to the external factors that might influence it. The issue of information loss is framed by three key questions addressing effects on the local and global scale as well as the influence of external conditions. Moreover, recommendations both for wind farm operators and researchers are provided with the aim to improve the information content. We present a methodology to determine the ideal signal resolution that minimized storage footprint, while guaranteeing high quality of the signal. Data related to the wind, electrical signals, and temperatures of the gearbox resulted as the critical signals that are largely affected by an information loss upon aggregation and turned out to be best recorded and stored at high resolutions. All analyses were carried out using more than one year of 1 Hz SCADA data of onshore wind farm counting 12 turbines located in the UK.