Hydrodynamics and Free-Flow Characteristics of Piano Key Weirs with Different Plan Shapes

This paper focuses on Piano Key Weirs (PKWs) as an effective solution for improving the discharge capacity of spillway systems. The flow behavior in inlet and outlet keys is experimentally studied to analyze the discharge capacity of PKWs with different plan shapes (i.e., rectangular, trapezoidal, and triangular). The results show that in outlet keys, the flow aeration regimes extend to higher values of headwater ratios (Ho/P) by increasing the length magnification ratio (B/w) and apex width ratio (A/w). In addition, the local submergence length is a decreasing function of A/w, especially in high flow heads. While the total interference length enlarges by reducing A/w in lower Ho/P values (Ho/P < 0.5), a reverse trend is observed in higher headwater ratios. PKW performance may also be impacted by the flow contraction and recirculation zone in inlet keys, which intensify in higher values of Ho/P, B/w, and A/w. According to the obtained results, while the discharge coefficient is a decreasing function of A/w in Ho/P > 0.4, it may have a reverse trend in lower head conditions. In addition, a trapezoidal PKW has the highest discharge efficiency in a wide range of the studied domain (Ho/P > 0.25 and B/w ≥ 2). It can improve the discharge efficiency by around 5%, while its body volume is almost 7% smaller than the traditional rectangular PKW. However, for low-length and high-head conditions (B/w = 1 and Ho/P > 0.5), the efficiency a rectangular PKW exceeds that of the other shapes.

Physiological and biochemical responses of soybean plants inoculated with Arbuscular mycorrhizal fungi and Bradyrhizobium under drought stress

Background The present study aims to study the effects of biofertilizers potential of Arbuscular Mycorrhizal Fungi (AMF) and Bradyrhizobium japonicum (B. japonicum) strains on yield and growth of drought stressed soybean (Giza 111) plants at early pod stage (50 days from sowing, R3) and seed development stage (90 days from sowing, R5). Results Highest plant biomass, leaf chlorophyll content, nodulation, and grain yield were observed in the unstressed plants as compared with water stressed-plants at R3 and R5 stages. At soil rhizosphere level, AMF and B. japonicum treatments improved bacterial counts and the activities of the enzymes (dehydrogenase and phosphatase) under well-watered and drought stress conditions. Irrespective of the drought effects, AMF and B. japonicum treatments improved the growth and yield of soybean under both drought (restrained irrigation) and adequately-watered conditions as compared with untreated plants. The current study revealed that AMF and B. japonicum improved catalase (CAT) and peroxidase (POD) in the seeds, and a reverse trend was observed in case of malonaldehyde (MDA) and proline under drought stress. The relative expression of the CAT and POD genes was up-regulated by the application of biofertilizers treatments under drought stress condition. Interestingly a reverse trend was observed in the case of the relative expression of the genes involved in the proline metabolism such as P5CS, P5CR, PDH, and P5CDH under the same conditions. The present study suggests that biofertilizers diminished the inhibitory effect of drought stress on cell development and resulted in a shorter time for DNA accumulation and the cycle of cell division. There were notable changes in the activities of enzymes involved in the secondary metabolism and expression levels of GmSPS1, GmSuSy, and GmC-INV in the plants treated with biofertilizers and exposed to the drought stress at both R3 and R5 stages. These changes in the activities of secondary metabolism and their transcriptional levels caused by biofertilizers may contribute to increasing soybean tolerance to drought stress. Conclusions The results of this study suggest that application of biofertilizers to soybean plants is a promising approach to alleviate drought stress effects on growth performance of soybean plants. The integrated application of biofertilizers may help to obtain improved resilience of the agro ecosystems to adverse impacts of climate change and help to improve soil fertility and plant growth under drought stress.

Is the Influence of Freud Declining in Psychology and Psychiatry? A Bibliometric Analysis

Sigmund Freud is occasionally perceived as outdated and his work no longer relevant to academia. The citing papers (CPs) that cited Freud works were collected from Web of Science and analyzed. The 10 most common research areas of the CPs were noted, and the overall volume of the respective bodies of literature were retrieved. I computed the annual percentage of the respective bodies of literature that cited Freud. On a separate note, I computed the annual percentage of citations coming from psychology and psychiatry. Results based on 42,571 CPs found that psychology accounted for over half of the citations to Freud. The percentage of psychology papers citing Freud declined gradually from around 3% in the late 1950s to around 1% in the 2010s, in an extent of −0.02% per year over the entire survey period spanning across 65 years from 1956 till 2020 (P &lt; 0.001). In psychiatry, a similar decline was observed, from around 4–4.5% in the late 1950s to just below 0.5% in the 2010s, in an extent of −0.1% per year (P &lt; 0.001). However, a reverse trend was observed for psychoanalysis literature, which generally increased from 10–20% before the 1980s to 25–30% since the 2000s, in an extent of +0.2% per year (P &lt; 0.001). Meanwhile, the annual percentage of CPs coming from psychology and psychiatry was decreasing by 0.4% per year (P &lt; 0.001). Bibliometric data supported the notion that Freud's influence was on a decline in psychology and psychiatry fields.

Film Naming: Book Titles and Film Titles

The studies of a film text as a polycoded textual phenomena involve the studies of its integral components, such as film story and screenplay, reflecting storyline or plot of a literary text that serves as a precedential text to filming and as an immediate constituent of a film itself. Film title combines the features of a book or story title and functions as a precedential phenomenon as well, but is an integral part of the process of film promotion and release, and in cinematographic sphere it’s of crucial importance. In fact, the original book or story titles used to change especially with time and audience involved, when filming remaking changes to TV series and miniseries, or films are followed by sequels and prequels so that not to make something like Jaws 3 or Indiana Jones 5 . Anyhow, most of film titles fully repeat or at least conserve the title of a literary text, still it’s often amplified to make difference or to emphasize the idea that the screenplay is a new one just the story to be continued, e.g., Jaws-3D: The Revenge. Not very often the changes are marked graphically as of Romeo + Juliet or Romeo & Julie t, so that to hint a new turnoff the plot to the audience. It’s obvious that film titles often use names of main characters either for series or episode titles or to form a film franchise like that of Jurassic Park or Indiana Jones ones. As people started to use different IT gadgets they used to read books less and less, and film stories tend to make a new book form when a book is no longer a precedent to a film. Thus the cycle of “book title → film title” was completed by a part of “film title → book title (or book itself” to reflect the reverse trend, which is known worldwide.

Film cooling characteristics on a grooved surface with different injection orientation angles

The film effectiveness was investigated on a grooved surface with the injection orientation angles of 30°, 90°, and 150° at the blowing ratios of 0.5, 0.8, 1.1, and 1.4. The injection orientation angle and the groove on the surface caused the effect of the various and irregular shaped hole injection due to the different orientation injection. The results showed that the new phenomenon of film effectiveness distributions was found on the grooved surface compared with the flat plate case. Film effectiveness distributions for the β = 30° were found to be the discontinuous strips. The surface averaged film effectiveness with the orientation angle of 30° was found to decrease with the increase of the blowing ratio. Additionally, the reverse trend was observed with the orientation angle of 150°. The film effectiveness with the orientation angle of 90° only slightly changed with the increase of the blowing ratio.

Film cooling characteristics on a grooved surface with different injection orientation angles

The film effectiveness was investigated on a grooved surface with the injection orientation angles of 30°, 90°, and 150° at the blowing ratios of 0.5, 0.8, 1.1, and 1.4. The injection orientation angle and the groove on the surface caused the effect of the various and irregular shaped hole injection due to the different orientation injection. The results showed that the new phenomenon of film effectiveness distributions was found on the grooved surface compared with the flat plate case. Film effectiveness distributions for the β = 30° were found to be the discontinuous strips. The surface averaged film effectiveness with the orientation angle of 30° was found to decrease with the increase of the blowing ratio. Additionally, the reverse trend was observed with the orientation angle of 150°. The film effectiveness with the orientation angle of 90° only slightly changed with the increase of the blowing ratio.

Modulating the ground state, stability and charge transport in OFETs of biradicaloid hexahydro-diindenopyrene derivatives and a proposed method to estimate the biradical character

Biradicaloid HDIP derivatives show that the ΔES–T gap does not follow the reverse trend of the biradical character but depends more on the delocalization of the radical centres at the outer rings.

Monitoring of fatty farming corives of extreme dairy pores of Ukraine

Aim. The “breed” was used as one of the genetic factors and as a result the genetic and mathematical analysis of fat content on cow’s milk and the output of milk fat depending on the origin mainly in Kharkiv region have been carried out. Methods. Studies were performed on materials pedigree registered in Kharkiv region agribusinesses and farms in Institute of Animal research, NAAN of Ukraine, on the cows of Ukrainian red and pockmarked and black and pockmarked breed. Results. The highest fatty dairy products are distinguished by animals of the Ukrainian red- and pockmarked milk breed (3.9 %), while the cows of Ukrainian black- and pockmarked milk are lower (3.81 %). As for the milk fat, there is a reverse trend, the cows of Ukrainian black- and pockmarked milk breed have a higher yield of milk fat in milk (167.4 kg) than cows of Ukrainian red -and- pockmarked milk (161.6 kg). Conclusions. The fat content in the milk of Ukrainian red -and- pockmarked currant dairy breeds is 3.9 %, while the cows of Ukrainian black- and pockmarked milk breed 3.81 %. The yield of milk fat from cows of the Ukrainian black- and pockmarked milk was 167.4 kg, while in cows of Ukrainian red- and pockmarked breed 161.6 kg. The "breed" factor has a significant (P > 0.999). Keywords: вlack- and pockmarked, red- and pockmarked, breed, factors, milk.

Darcy–Forchheimer flow of nanofluid due to a curved stretching surface

Purpose The purpose of present communication is to analyze Darcy–Forchheimer flow of viscous nanofluid by curved stretchable surface. Flow in porous medium is characterized by Darcy–Forchheimer relation. Brownian diffusion and thermophoresis are considered. Convective heat and mass boundary conditions are also used at the curved stretchable surface. Design/methodology/approach The resulting nonlinear system is solved through shooting technique. Findings Skin friction coefficient is enhanced for larger porosity parameter and inertia coefficient while reverse trend is noticed for curvature parameter. Local Nusselt number is enhanced for higher Prandtl number and thermal Biot number, whereas the opposite trend is seen via curvature parameter, porosity parameter, inertia coefficient, thermophoresis parameter and Brownian motion parameter. Local Sherwood number is enhanced for Schmidt number, Brownian motion parameter and concentration Biot number, while reverse trend is noticed for curvature parameter, porosity parameter, inertia coefficient and thermophoresis parameter. Originality/value To the best of author’s knowledge, no such consideration has been given in the literature yet.

The impact of heteroatom substitution on cross-conjugation and its effect on the photovoltaic performance of DSSCs – a computational investigation of linear vs. cross-conjugated anchoring units

The heteroatom substitution on cross conjugation takes a reverse trend to the linear π-conjugated systems by means of energy levels and photophysical properties. The resultant changes directly affecting the photovoltaic performance of DSSCs.