Experiment and numerical simulation of the combined effect of winding, cool-down, and screening current induced stresses in REBCO coils

This paper overviews the combined effect of winding, cool-down, and screening current-induced stresses in REBCO coils. First, a simulation method to model the circumferential stress modification effect due to the screening-current is overviewed. The simulation includes coil winding, cooling down, and coil charge up to the operating current. Second, we will compare the numerical simulation results with the experimental results. The numerical simulations for a dry coil and an epoxy impregnated coil agree well with the experimental results. Third, the enhanced circumferential stress did not degrade the performance of a dry winding REBCO coil, but. the improved increased compressive stress buckled the coil structure. Finally, it is demonstrated that epoxy impregnation has beneficial effects in reducing the stress modification effect. However, the circumferential stress is enormously enhanced at the coil ends, sometimes resulting in degradation of the coil performance.

Control of thermal regime of thermoelectric coolers in uniform temperature field

The comparative analysis of means of control of a thermal mode at minimization of a complex of the basic parameters in various combinations with indicators of reliability and dynamics of functioning of one-stage thermoelectric cooler is resulted. The study was conducted for the operating range of temperature differences, standard heat load and different geometry of the branches of thermocouples. According to the results of research to minimize the sets of basic parameters in interaction with the indicators of reliability and dynamics of work, a number of current modes of operation have been developed. The developed mathematical models for the optimal operating current from the relative temperature difference and heat transfer of the radiator for the proposed operating modes are analyzed. The results of calculations of the main parameters, reliability indicators, and time of transition to stationary mode of operation for different current modes of operation in the range of temperature differences for different geometry of branches of thermoelements are given. The extremes of dependences of the cooling coefficient, heat dissipation capacity of the radiator, the amount of energy consumed on the relative operating current are determined, which is essential for the implementation of the control function. The possibility of choosing the current mode of operation for optimal control of the thermal regime of single-stage thermoelectric devices manufactured by the same technology, taking into account mass, size, energy, reliability and dynamic characteristics. The developed method of optimal regulation of the thermal regime of a single-stage thermoelectric cooler based on minimizing the set of basic parameters allows finding and choosing compromise solutions taking into account the importance of each of the limiting factors.

Modeling and validation of nonlinear voltage-current characteristics of ITER PF joint sample tested in SULTAN facility

The ITER Poloidal Field (PF) coils are wound into double pancakes with NbTi cable-in-conduit conductors, which are connected by joints in shaking hands lap-type configuration. The coils are operating in pulsed mode with a maximum operating current of 55 kA and peak magnetic field of 6.4 T, utilizing electromagnetic load on the conductors and joints. A series of PF qualification joint samples modified in praying hands configuration is measured in the SULTAN facility. For some samples, a nonlinear voltage-current (VI) characteristic is observed during the assessment of joint resistance. The growth of joint resistance versus the B×I product is larger than what is expected from the magneto-resistant copper contribution. Two non-homogeneous contact resistance models are developed and combined to quantitatively evaluate the reason for the nonlinear VI behavior in combination with the relevant power dissipation and current redistribution in the joint. The simulations reveal that, for the particular pre-qualification PFJEU2 sample with resistance variation up to 3.5 nΩ, the most probable reason for the nonlinear VI characteristic is a widely spread defective connection between copper sole and shim. The electromagnetic force involves a separation effect on the mechanically and electrically weakly connected parts, resulting into a varying resistance depending on transport current and background field. The hypothesis and models are validated by an experiment on a similar sample PFJEU3 and a post-mortem examination of the PFJEU2 sample.

Impedance Spectroscopy Measurements of Ionomer Film Oxygen Transport Resistivity in Operating Low-Pt PEM Fuel Cell

The work presents a model for local impedance of low-Pt proton exchange membrane fuel cells (PEMFCs), including cathode pore size distribution and O2 transport along pores and through a thin ionomer film covering Pt/C agglomerates. The model was applied to fit the local impedance spectra of low-Pt fuel cells operated at current densities from 100 to 800 mA cm−2 and recorded by a segmented cell system. Assuming an ionomer film thickness of 10 nm, the fitting returned the product of the dimensionless Henry’s constant of oxygen dissolution in ionomer KH by the oxygen diffusivity DN in the ionomer (KHDN). This parameter allowed us to determine the fundamental O2 transport resistivity RN through the ionomer film in the working electrode under conditions relevant to the realistic operation of PEMFCs. The results show that variation of the operating current density does not affect RN, which remains nearly constant at ≃0.4 s cm−1.

Design and modelling tools for DC HTS cables for the future railway network in France

The use of High Temperature Superconducting (HTS) cables in power systems increases transmission capacity whereas reducing the volume of the installation. In addition, when transmission currents exceed a few kA, HTS DC cables significantly reduce power losses, right-of-ways and total system mass. This summary describes the various studies to be carried out in order to correctly dimension DC HTS cables for the new railway network envisaged by the French company SNCF, which has to take into account the ultra-urban needs. The process used to design DC cables for different operating current values between 5 kA and 20 kA at 1 750 V using commercial (RE)BaCuO tapes is presented. In this design stage, the dependence of the critical current density Jc(B, θ, T) of the superconducting tapes, the thermal properties of the materials used, and the different cooling modes as a function of the cable length are taken into account. Finally, we discuss a cryogenic solution to protect the cable in case of short-circuit or overload.

THE DISTRIBUTION OF MAGNETIC AND THERMAL FIELDS, POWER LOSSES IN ELECTROMAGNETIC SHIELD OF UNDERGROUND TWO-CIRCUIT CABLE LINE

In the article, the magnetic and thermal field distributions generated by underground two-circuit extra-high voltage power cable line in the environment, particularly near the cables and flat aluminum shield, which is located at a different distance from the cables and has different thicknesses, are analyzed. The unique features of the magnetic field and temperature distributions inside the shield are computed and studied. For the cases under consideration, the Joule losses in the external shield do not exceed 3% of the losses in the cables. The primary electromagnetic characteristics are compared for the aluminum shield (shielding efficiency is 1,94) and the shield with lower conductivity (shielding efficiency is equal to 1,2). As shown, the thicker shield helps to increase the ampacity of the cable line owing to lower heating. The actual operating current of the cable line under consideration depends on the distance of the shield from the cables owing to the relation between their maximum temperature and this distance. Ref. 15, fig. 7, table.

Numerical modelling of non-planar GaN LED with CNT top contact

In this paper, the theoretical study of LED based on GaN NWs with carbon nanotubes (CNT) top contact has been presented. The main electrical and optical characteristics of LED have been numerically calculated. In a 0.5 x 0.5 mm NWs array, the Ohmic losses in CNTs were 2.7% with an operating current density of 50 A/cm2. It proves the possibility of using CNTs as transparent contact.

Dynamic Modeling of a Proton-Exchange Membrane Fuel Cell Using a Gaussian Approach

This paper proposes a Gaussian approach for the proton-exchange membrane fuel cell (PEMFC) model that estimates its voltage behavior from the operating current value. A multi-parametric Gaussian model and an unconstrained optimization formulation based on a conventional non-linear least squares optimizer is mainly considered. The model is tested using experimental data from the Ballard Nexa 1.2 kW fuel cell (FC). This methodology offers a promising approach for static and current-voltage, characteristic of the three regions of operation. A statistical study is developed to evaluate the effectiveness and superiority of the proposed FC Gaussian model compared with the Diffusive Global model and the Evolution Strategy. In addition, an approximation to the exponential function for a Gaussian model simplification can be used in systems that require real-time emulators or complex long-time simulations.

A Method for Monitoring State-of-Charge of Lithium-Ion Cells Using Multi-Sine Signal Excitation

In this paper, a method for monitoring SoC of a lithium-ion battery cell through continuous impedance measurement during cell operation is introduced. A multi-sine signal is applied to the cell operating current, and the cell SoH and SoC can be simultaneously monitored via impedance at each frequency. Unlike existing studies in which cell impedance measurement is performed ex situ through EIS equipment, cell state estimation is performed in situ. The measured impedance takes into account cell temperature and cell SoH, enabling accurate SoC estimation. The measurement system configured for the experiment and considerations for the selection of measurement parameters are described, and the accuracy of cell SoC estimation is presented.

Simulation Analysis of Current in Metal Sheath of Power Cable Considering Temperature Characteristics

This paper proposes a cable broadband circuit model considering the temperature characteristics. This paper establishes the equivalent circuit model of the cross-bonded power cable and proposes the broadband parameter calculation method considering the temperature. The cable parameters are calculated by the vector fitting method. Based on the operating current and cable temperature data of the cable on a certain day, the simulation analysis of the cable sheath current considering the temperature is carried out using Simulink. Finally, the simulation results show that the cable sheath current is significantly affected by temperature.