Do acetabular parameters measured on 2D imaging correlate with CT, and can lateral centre-edge angle predict femoral head coverage?

Aims The lateral centre-edge angle (LCEA) is a plain radiological measure of superolateral cover of the femoral head. This study aims to establish the correlation between 2D radiological and 3D CT measurements of acetabular morphology, and to describe the relationship between LCEA and femoral head cover (FHC). Methods This retrospective study included 353 periacetabular osteotomies (PAOs) performed between January 2014 and December 2017. Overall, 97 hips in 75 patients had 3D analysis by Clinical Graphics, giving measurements for LCEA, acetabular index (AI), and FHC. Roentgenographical LCEA, AI, posterior wall index (PWI), and anterior wall index (AWI) were measured from supine AP pelvis radiographs. The correlation between CT and roentgenographical measurements was calculated. Sequential multiple linear regression was performed to determine the relationship between roentgenographical measurements and CT FHC. Results CT-measured LCEA and AI correlated strongly with roentgenographical LCEA ( r = 0.92; p < 0.001) and AI ( r = 0.83; p < 0.001). Radiological LCEA correlated very strongly with CT FHC ( r = 0.92; p < 0.001). The sum of AWI and PWI also correlated strongly with CTFHC ( r = 0.73; p < 0.001). CT measurements of LCEA and AI were 3.4° less and 2.3° greater than radiological LCEA and AI measures. There was a linear relation between radiological LCEA and CT FHC. The linear regression model statistically significantly predicted FHC from LCEA, F(1,96) = 545.1 (p < 0.001), adjusted R2 = 85.0%, with the prediction equation: CT FHC(%) = 42.1 + 0.77(XRLCEA) Conclusion CT and roentgenographical measurement of acetabular parameters are comparable. Currently, a radiological LCEA greater than 25° is considered normal. This study demonstrates that those with hip pain and normal radiological acetabular parameters may still have deficiencies in FHC. More sophisticated imaging techniques such as 3D CT should be considered for those with hip pain to identify deficiencies in FHC. Cite this article: Bone Jt Open 2022;3(1):12–19.

763 Feasibility and reliability of a comprehensive three-dimensional transesophageal echocardiography screening process for transcatheter mitral valve replacement

Aims The planning of transcatheter mitral valve replacement (TMVR) requires cardiac imaging assessment to establish patient eligibility according to mitral valve anatomy, device characteristics and risk of left ventricular outflow tract (LVOT) obstruction. In this setting, computed tomography (CT) is considered the reference method. Although recent studies demonstrated that three-dimensional transesophageal echocardiographic (3D-TEE) assessment of mitral anatomy presents a good agreement compared to CT, its potential role in the TMVR planning has never been fully evaluated. To test feasibility and reliability of a comprehensive 3D-TEE screening in candidates for TMVR. Methods We performed a single-centre retrospective observational study including 59 consecutive patients referred to our centre for TMVR due to high surgical risk, who performed a pre procedural CT and 3D-TEE screening. The measurements of mitral annulus (MA), native LVOT and predicted Neo-LVOT, assessed with CT and 3D-TEE were collected in order to evaluate their concordance in the assessment of TMVR eligibility. The final suitability decision was given by the valve manufacturer based on CT measurements and then compared with the screening results obtained with 3D-TEE evaluation. 3D-TEE measurements were obtained with a post processing analysis using a novel automated software platform (3mensio Structural Heart 10.1 - 3mSH, Pie Medical Imaging, Bilthoven, Netherlands). Results Excellent correlation was found between 3D-TEE and CT measurements for MA area (r =0.85), antero-posterior diameters (r= 0.81), native LVOT (r=0.82) and Neo-LVOT areas (r=0.95) (all P-values &lt;0.0001). Among 59 patients screened, 17 did not undergo the intervention because were found ineligible due to small predicted neo-LVOT, too small or too large MA area. Among the 42 patients with a successful screening, 32 underwent TMVR and all of them showed a correct implantation and no LVOT obstruction at post procedural echocardiographic evaluation. An almost perfect agreement among CT and 3D-TEE was found in assessing the eligibility for TMVR implantation (Cohen kappa 0.82, P&lt;0.001). Interobserver and intraobserver agreements were found excellent for the parameters appraised with ICCs &gt;0.80. Conclusions 3D-TEE appraisements of MA dimensions, native LVOT and Neo-LVOT are feasible in patients candidate for TMVR, showing good correlations with CT measurements and high accuracy to predict TMVR screening success.

Development of a radiographic scoring system for new bone formation in gout

Background Features of new bone formation (NBF) are common in tophaceous gout. The aim of this project was to develop a plain radiographic scoring system for NBF in gout. Methods Informed by a literature review, scoring systems were tested in 80 individual 1st and 5th metatarsophalangeal joints. Plain radiography scores were compared with computed tomography (CT) measurements of the same joints. The best-performing scoring system was then tested in paired sets of hand and foot radiographs obtained over 2 years from an additional 25 patients. Inter-reader reproducibility was assessed using intraclass correlation coefficients (ICC). NBF scores were correlated with plain radiographic erosion scores (using the gout-modified Sharp-van der Heijde system). Results Following a series of structured reviews of plain radiographs and scoring exercises, a semi-quantitative scoring system for sclerosis and spur was developed. In the individual joint analysis, the inter-observer ICC (95% CI) was 0.84 (0.76–0.89) for sclerosis and 0.81 (0.72–0.87) for spur. Plain radiographic sclerosis and spur scores correlated with CT measurements (r = 0.65–0.74, P < 0.001 for all analyses). For the hand and foot radiograph sets, the inter-observer ICC (95% CI) was 0.94 (0.90–0.98) for sclerosis score and 0.76 (0.65–0.84) for spur score. Sclerosis and spur scores correlated highly with plain radiographic erosion scores (r = 0.87 and 0.71 respectively), but not with change in erosion scores over 2 years (r = −0.04–0.15). Conclusion A semi-quantitative plain radiographic scoring method for the assessment of NBF in gout is feasible, valid, and reproducible. This method may facilitate consistent measurement of NBF in gout.

Accuracy of Cone Beam CT Measurements for Assessment of Posterior Mandible: A Cadaver Study

Objectives: This study is aimed at analysing the accuracy and reliability of the cone beam CT (CBCT) measurements and direct physical measurements of the posterior mandible. Materials and methods: Eighteen cadaveric hemi-mandibles were dissected from the soft tissues and the CBCT images of the mandibles were taken. Direct physical and cone beam CT measurements of six landmarks which includes height of ramus (R), distance of lingula to sigmoid notch (LS), distance of lingula to inferior border (LI), position of lingula in relation to occlusal plane (L-OP), ramus thickness at crestal level (RT-C), and ramus thickness at midway between sigmoid notch and lingula (RT-M) were determined. Accuracy and reliability of the measurements were tested. Results: Four landmarks showed high accuracy when measuring the posterior mandible, while two landmarks, LI and RT-M, showed statistically significant weaker accuracy (p<0.05). Inter-reliability were good for all landmarks when measured directly physically on mandibles (ICC>0.7 and p>0.05), but were low on two landmarks, LI and RT-C, on CBCT measurement (ICC<0.5 and p<0.05). Conclusion: A generally strong accuracy between direct physical and CBCT measurements for most landmarks on posterior mandible were found. Reliability between two researchers were high on direct physical measurements. Meanwhile, two landmarks on CBCT which include LI and RT-C showed low inter-reliability. Hence, CBCT measurements proved to be a good tool for pre-operative assessment, since high inter-reliability and strong accuracy corresponding to direct physical were recorded.

CT image quality influence on different material Edge Response Functions for accurate metrological applications

The main objective of the proposed work was to analyse the influence of magnification and focal spot size scan settings on X-ray computed tomography (CT) measurements results under commercial threshold-based algorithms. The relationship between spatial resolution and contrast sensitivity in CT scans of different materials and the accuracy of the resulting CT measurement results is discussed. For that purpose, Aluminium, Copper, Inconel 718 and Titanium disk phantoms were scanned. Preliminary measurements showed that deviations can increase up to 0.48% when the scanning magnification was increased while, for a given magnification, the decrease of a focus size from 1mm to 0.4mm slightly improves the differences up to 0.15%, being negligible at low magnifications. Unsharpness (U T ) and contrast-to-noise ratio (CNR) were calculated for each scanning conditions according to standard ASTM E1695 – 20. A new image quality indicator that includes the combined effect of the U T and CNR was proposed in order to relate measurement error with the image quality. The indicator proves that the influence of CNR is much higher than influence of U T on the CT measurements.

Prognostic Role of Preoperative Sarcopenia Evaluation of Cervical Muscles with Long-Term Outcomes of Patients with Oral Squamous Cell Carcinoma

Accumulating evidence has shown that sarcopenia in patients with oral squamous cell carcinoma (OSCC) is at a risk of poor prognosis. There is no universal consensus on how to assess sarcopenia in patients with OSCC in daily practice. It is important to validate the usefulness of sarcopenia assessment from cervical muscles, which are frequently used in routine clinical practice in patients with OSCC. In this study, we investigated whether preoperative lumbar (L3) skeletal muscle mass and adiposity in OSCC patients were associated with cervical (C3) skeletal muscle mass and adiposity from CT measurements. We also investigated whether skeletal muscle mass and adiposity in the C3 muscles were associated with survival rates in patients with OSCC. We demonstrated that both the quality and quantity of muscle between the C3 and L3 levels were positively correlated with each other. We also demonstrated that the survival rates in patients with low sternocleidomastoid muscle mass index, high processus spinosus muscle-intramuscular adipose tissue content, and the combination of both were significantly lower than those in the controls. These results suggest that the assessment of sarcopenia from multiple neck muscles by preoperative CT measurements may be useful in predicting the prognosis of patients with OSCC.

“Double-Pulley” Dual-Row Technique for Arthroscopic Fixation of Large Bony Bankart Lesion: Minimum 2-Year Follow-up With CT Evaluation

Background: A “double-pulley” dual-row technique had been applied for arthroscopic fixation of large bony Bankart lesion in which the fragment has a wide base. Purpose: To investigate clinical outcomes and glenoid healing after arthroscopic fixation of bony Bankart lesion using the double-pulley dual-row technique. Study Design: Case series; Level of evidence, 4. Methods: A total of 25 patients were included in this retrospective study. The American Shoulder and Elbow Surgeons (ASES) score, pain visual analog scale (VAS) score, and range of motion of the affected shoulder were assessed. Radiographs and computed tomography (CT) scans (preoperatively, immediately after surgery, and at 1 year postoperatively) were performed to evaluate arthritic changes (Samilson-Prieto classification) and glenoid size. The intraobserver reliability of the CT measurements was analyzed. Results: At a mean follow-up of 3.4 years, the mean ASES and VAS scores were 94.87 ± 5.02 and 0.48 ± 0.59, respectively. Active forward elevation, external rotation with the arm at the side, and internal rotation were 165.80° ± 11.70°, 33.20° ± 8.02°, and T9 (range, T6-S1), respectively. No patient reported a history of redislocation or instability. The intraobserver reliability of the CT measurements was moderate to excellent. The mean preoperative size of the bony fragment was measured as 23.4% ± 7.8% of the glenoid articular surface. The quality of the reduction was judged to be excellent in 13 (52%) cases, good in 8 (32%), and fair in 4 (16%). The mean immediate postoperative glenoid size was 96.8% ± 4.3%, and bone union was found in all cases. There were no significant differences between reconstructed and immediate postoperative glenoid size or between preoperative and final Samilson-Prieto grades. Conclusion: The arthroscopic double-pulley method was a reliable technique for the fixation of large bony Bankart lesions with a wide base. Satisfactory results can be expected regarding the restoration of the glenoid morphology and stability of the shoulder. High healing rate and good shoulder function can be achieved. No radiological evidence of cartilage damage caused by suture abrasion was found at 2- to 5-year follow-up.

Computed tomography total airway count predicts progression to COPD in at risk smokers

There is limited understanding of how to identify people at high risk of developing chronic obstructive pulmonary disease (COPD). Our objective was to investigate the association between computed tomography (CT) total airway count (TAC) and incident COPD over 3-years among ever-smokers from the population-based Canadian Cohort Obstructive Lung Disease (CanCOLD) study.CT and spirometry were acquired in ever-smokers at baseline; spirometry was repeated at 3-year follow-up. CT TAC was generated by summing all airway segments in the segmented airway tree (VIDA Diagnostics, Inc.). CT airway wall area, wall thickness for a theoretical airway with 10 mm perimeter (Pi10), and low attenuation areas below −856HU (LAA856) were also measured. Logistic and mixed effects regression models were constructed to determine the association for CT measurements with development of COPD and FEV1/FVC decline, respectively.Among 316 at risk participants evaluated at baseline (65±9 years, 40% female, 18±19 pack-years), incident COPD was detected in 56 participants (18%) over a median 3.1±0.6 years of follow-up. Among CT measurements, only TAC was associated with incident COPD (p=0.03), where a 1-sd decrement in TAC increased the odds ratio for incident COPD by a factor of two. In a multivariable linear regression model, reduced TAC was significantly associated with greater longitudinal FEV1/FVC decline (p=0.03), but no other measurements were significant.CT TAC predicts incident COPD in at risk smokers, indicating that smokers exhibit early structural changes associated with COPD prior to abnormal spirometry.

Measurement of acetabular wall indices: comparison between CT and plain radiography

The purpose of this study was to compare measurements of anterior wall index (AWI) and posterior wall index (PWI) on computed tomography (CT) to those on radiographs (XR). A consecutive cohort of 33 patients (45 hips total) being evaluated for hip pain with both XR and CT was examined. Preoperative measurements of AWI and PWI were performed utilizing supine anteroposterior pelvic XR and coronal and swiss axial CT scans by two independent raters. Mean differences between XR and CT measurements were compared, and agreement between measurements was assessed using the concordance correlation coefficient (rc) and Bland–Altman analysis. A total of 39 hips in 28 patients were analyzed. The mean patient age was 31.1 ± 9.0 years, and 50% were female. Mean AWI and PWI on XR was 0.50 ± 0.14 and 0.91 ± 0.12, respectively. Measured values of AWI were consistently larger (0.08 ± 0.10, P &lt; 0.01) on XR compared with both coronal and swiss axial CT, with moderate agreement between XR and CT measurements (rc = 0.68–0.70). Measured values of PWI were consistently smaller (0.15 ± 0.12, P &lt; 0.05) on XR compared with both coronal and swiss axial CT, with poor agreement between XR and CT measurements (rc = 0.37–0.45). Measured values of acetabular wall indices on XR were consistently larger for AWI and smaller for PWI relative to CT. Agreement between XR and CT measures of the indices were moderate to poor. This highlights the need for standardization of XR- and CT-based measurements to improve assessment of acetabular coverage and subsequent clinical decision-making.