Smart Surfaces: Photocatalytic Degradation of Priority Pollutants on TiO2-Based Coatings in Indoor and Outdoor Environments—Principles and Mechanisms

Heterogeneous photocatalysis using semiconductor oxides such as TiO2, provides an up-and-coming solution for the degradation of environmental pollutants compared with other technologies. TiO2-containing construction materials and paints activated by UV/solar light destroy the ozone precursors NO and NO2 up to 80% and 30%, respectively. The majority of TiO2 materials developed so far are primarily for outdoor use. In recent years, substantial efforts have been made to investigate further the photocatalytic activity of materials containing TiO2 toward priority air pollutants such as NO, NO2, and volatile organic compounds (VOCs) frequently accumulated at high concentration levels, particularly in indoor spaces. The intention of the investigations was to modify the titanium dioxide (TiO2), so that it may be activated by visible light and subsequently used as additive in building envelop materials and indoor paints. This has been achieved, to a high extent, through doping of TiO2 with transition metals such as V, Cr, Fe, Mn, Ni, Co, Cu, and Zn, which reduce the energy gap of TiO2, facilitating the generation of free electrons and holes, thus, extending the absorption spectral range of modified TiO2 to the area of visible light (bathochromic shift-redshift). A substantial problem using TiO2-containing paints and other building materials in indoor environments is the formation of byproducts, e.g., formaldehyde, through the heterogeneous photocatalytic reaction of TiO2 with organic matrices. This affects the air quality in confined spaces and, thus, becomes a possible risk for human health and wellbeing. This work describes the principles and mechanisms of the photocatalytic reactions at the air/catalyst interface of priority pollutants such as NO, benzene, and toluene as individual compounds or mixtures. Emphasis is placed on the reaction and recombination processes of the charge carriers, valence band positive holes (h+) and free electrons (e−), on the surface of TiO2, and on key factors affecting the photocatalytic processes, such as humidity. A hypothesis on the role of aromatic compounds in suppressing the recombination process (h+ and e−) is formulated and discussed. Furthermore, the results of the photocatalytic degradation of NO under visible light conditions using different admixtures of TiO2 and manganese doped (Mn–TiO2) are presented and discussed.

DFT and TD-DFT study of adsorption behavior of Zejula drug on surface of the B12N12 nanocluster

The adsorption of the Zejula drug on the surface of B12N12 nanocluster has studied using DFT and TD-DFT. The quantum calculations have performed at the M062X/6–311 + + G(d,p) level of theory in the solvent water. The adsorption of the Zejula from N13 atom on the B12N12 leads to the higher electrical conductivity due to the low Eg rather. The change of DM also displays a charge transfer between Zejula and nanocluster. The UV absorption and IR spectra were calculated. The adsorption of Zejula drug over B12N12 nanocluster in the complexes Zejula/B12N12 can be considered as a bathochromic shift. According to QTAIM analysis, -G(r)/V(r) values for B-O and B-N bonds confirming the electrostatic and partial covalent character. The values of LOL and ELF confirm that the interactions are dominated by electrostatic interaction contributions. The calculated data reveal the B12N12 nanocluster can be appropriate as a biomedical system for the delivery of Zejula drug.

Interrogating the Behaviour of a Styryl Dye Interacting with a Mesoscopic 2D-MOF and Its Luminescent Vapochromic Sensing

In this contribution, we report on the solid-state-photodynamical properties and further applications of a low dimensional composite material composed by the luminescent trans-4-(dicyanomethylene)-2-methyl-6-(4-dimethylaminostyryl)-4H-pyran (DCM) dye interacting with a two-dimensional-metal organic framework (2D-MOF), Al-ITQ-HB. Three different samples with increasing concentration of DCM are synthesized and characterized. The broad UV-visible absorption spectra of the DCM/Al-ITQ-HB composites reflect the presence of different species of DCM molecules (monomers and aggregates). In contrast, the emission spectra are narrower and exhibit a bathochromic shift upon increasing the DCM concentration, in agreeance with the formation of adsorbed aggregates. Time-resolved picosecond (ps)-experiments reveal multi-exponential behaviors of the excited composites, further confirming the heterogeneous nature of the samples. Remarkably, DCM/Al-ITQ-HB fluorescence is sensitive to vapors of electron donor aromatic amine compounds like aniline, methylaniline, and benzylamine due to a H-bonding-induced electron transfer (ET) process from the analyte to the surface-adsorbed DCM. These findings bring new insights on the photobehavior of a well-known dye when interacting with a 2D-MOF and its possible application in sensing aniline derivatives.

New 2,5-bis(2-ethylhexyl)pyrrolo[3,4-c]pyrrole-1,4(2H,5H)-dione-2,2’-bipyridine-based co-polymer, synthesis, photophysical properties and response to metal cations

A new co-polymer based on fragments of 2-(2-pyridyl)monoazatriphenylene and 2,5-bis (2-ethylhexyl)-3,6-di(thiophen-2-yl)pyrrolo[3,4-c]pyrrole-1,4(2H,5H)-dione was prepared by using the Sonogashira reaction. The photophysical properties of the polymer were studied. The presence of a strong bathochromic shift of the absorption and emission maxima in comparison with the previously described monomer units is shown. The polymer exhibits an intense “turn-off” response toward Cu2+ cations.

Design of a graphene oxide-BODIPY conjugate for glutathione depletion and photodynamic therapy

Boron dipyrromethene derivates (BODIPYs) are promising photosensitisers (PSs) for cancer treatment using photodynamic therapy (PDT). This study investigates the functionalisation of graphene oxide (GO) with a BODIPY derivate for glutathione (GSH) depletion and PDT. The functionalisation of GO with a 3,5-dichloro-8-(4-boronophenyl) BODIPY via a diol derivatisation with the phenyl boronic acid moiety at the meso position of the BODIPY core, allowed to preserve the intrinsic properties of GO. We demonstrated that both chlorine atoms were substituted by GSH in the presence of glutathione transferase (GST), inducing a relevant bathochromic shift in the absorption/emission features and thus generating the active PS. Ex vitro assessment using cell lysates containing cytoplasmatic GST revealed the intracellular catalytic mechanism for the nucleophilic substitution of the GO-BODIPY adduct with GSH. Confocal microscopy studies showed important differences in the cellular uptake of free BODIPY and GO-BODIPY and revealed the coexistence of GO-BODIPY, GO-BODIPY-GS, and GO-BODIPY-GS2 species inside vesicles and in the cytoplasm of the cells after 24 h of incubation. In vitro biocompatibility and safety of GO and GO-BODIPY were evaluated in 2D and 3D models of prostate adenocarcinoma cells (PC-3), where no toxicity was observed up to 100 µg/mL of GO/GO-BODIPY in all treated groups 24 h post-treatment (cell viability > 90%). Only a slight decrease to 80% at 100 µg/mL was observed after 48 h of incubation. We demonstrated the efficacy of a GO adduct containing an α-chlorine-substituted BODIPY for the simultaneous depletion of intracellular GSH and the photogeneration of reactive oxygen species using a halogen white light source (5.4 mW/cm2) with a maximum in the range of 500-800 nm, which significantly reduced cell viability (< 50%) after irradiation. Our study provides a new vision on how to apply BODIPY derivates and potentiate the toxicity of PDT in prostate and other types of cancer.

Inclusion Complex of Fexofenadine Hydrochloride with Cyclodextrins

<p>Fexofenadine hydrochloride (FFN), (±)-4-[1-hydroxy-4[4-(hydroxydiphenylmethyl)-1-piperidinyl]-butyl] α,α-dimethylbenzeneacetic acid hydrochloride, is a second-generation antihistamine that is used to treat allergies. The drug is highly hydrophobic and slightly soluble in water. Cyclodextrins are widely used to improve the physicochemical and pharmaceutical properties such as solubility, stability, and bioavailability of poorly soluble drug molecules.Cyclodextrins can molecularly encapsulate various drugs into their hydrophobic cavity without forming any covalent bonds. Cyclodextrin (CDs), especially ß-Cyclodextrin (ß-CD), are widely used in the pharmaceutical field due to its ability to stabilize drug molecules and taste masking purposes.<strong> </strong></p><p>The phase solubility study was performed according to the method of Higuchi and Connors by adding the fexofenadine hydrochloride in excess to different concentrations of cyclodextrin solutions. Phase solubility study records show that the stability constant and complex stoichiometry of FFN-CD complexes increases linearly with CD concentration. Also, an increase in the concentration of β-cyclodextrin leads to an increase in the aqueous solubility of FFN. Complexes were analyzed by UV-VIS spectroscopy using the calibration curve of FFN. Also, UV-VIS spectra indicate a bathochromic shift which proves that complex formation has occurred.</p><p>Solid inclusion complexes of fexofenadine/β-cyclodextrin and its derivatives were prepared at the molar ratios of 1:1 by the physical mixing method. Characterization of the complexes was performed by using infrared spectroscopy. </p>

INVESTIGATION OF THE POSSIBILITY OF USING THE METHOD OF DIFFERENTIAL SPECTROPHOTOMETRY FOR THE ANALYSIS OF OVERLAPPING ABSORPTION BANDS OF TRITERPENE SAPONINS CHROMOPHORES AND THEIR QUANTITATIVE DETERMINATION IN AQUEOUS SOLUTIONS

A detailed analysis of the absorption spectra of mono- and bidesmoside triterpene glycosides was performed. It is suggested that the maximum in the region of 198–208 nm is attributed to the absorption of the double bond in the cyclohexene ring of the aglycone. The second less seen maximum at a wavelength of 280 nm is observed in the spectrum of saponin Quillaja Saponaria and is almost completely absent in the spectrum of saponin Mukorossi Sapindus. Identification of this maximum is extremely difficult, since its presence can be due to both the aldehyde group in the aglycone and the hydroxyl and carboxyl groups in the carbohydrate molecules. Using the method of differential spectrophotometry, a method for decomposing the UV spectrum of saponins into its constituent components is proposed and justified. A spectral analysis was performed, including the assignment of the absorption bands to the functional groups of the studied compounds. The possibility of estimating changes in the spectral properties of glycoside solutions with changes in the acidity of the medium is considered. The possibility of a bathochromic shift of the maximum absorption of the aglyconic part of saponin depending on the microenvironment (the structure of the carbohydrate part) and changes in the pH of the solution is established. It is shown that the bands at 274, 280.5 nm correspond to n-π* transitions of carbonyl and carboxyl groups and are determined only in the regions of high concentrations in Quillaja Saponaria saponin solutions. Based on the results obtained, calibration models for the quantitative determination of saponins in solutions are proposed. The regression analysis of the calibration equations is carried out, the main statistical indicators are calculated.

Synthesis and Computational Characterization of Organic UV-Dyes for Cosensitization of Transparent Dye-Sensitized Solar Cells

The fabrication of colorless and see-through dye-sensitized solar cells (DSCs) requires the photosensitizers to have little or no absorption in the visible light region of the solar spectrum. However, a trade-off between transparency and power conversion efficiency (PCE) has to be tackled, since most transparent DSCs are showing low PCE when compared to colorful and opaque DSCs. One strategy to increase PCE is applying two cosensitizers with selective conversion of the UV and NIR radiation, therefore, the non-visible part only is absorbed. In this study, we report synthesis of novel five UV-selective absorbers, based on diimide and Schiff bases incorporating carboxyl and pyridyl anchoring groups. A systematic computational investigation using density functional theory (DFT) and time-dependent DFT approaches was employed to evaluate their prospect of application in transparent DSCs. Experimental UV/Vis absorption spectra showed that all dyes exhibit an absorption band covering the mid/near-UV region of solar spectrum, with a bathochromic shift and a hyperchromic shifts for Py-1 dye. Computational results showed that the studied dyes satisfied the basic photophysical and energetics requirements of operating DSC as well as the stability and thermodynamical spontaneity of adsorption onto surface of TiO2. However, results revealed outperformance of the thienothiophene core-containing Py-1 UV-dye, owing to its advantageous structural attributes, improved conjugation, intense emission, large Stokes shift and maximum charge transferred to the anchor. Chemical compatibility of Py-1 dye was then theoretically investigated as a potential cosensitizer of a reference VG20-C2 NIR-dye. By the judicious selection of pyridyl anchor-based UV-absorber (Py-1) and carboxyl anchor-based NIR-absorber (VG20), the advantage of the optical complementarity and selectivity of different TiO2-adsorption-site (Lewis- and Bronsted-acidic) can be achieved. An improved overall PCE is estimated accordingly.