Improvement of Heating Uniformity by Limiting the Absorption of Hot Areas in Microwave Processing of CFRP Composites

Carbon fiber reinforced polymer (CFRP) composites are integral to today’s industries. Curing or consolidation are vital processes for manufacturing CFRP components. Microwave processing has many advantages compared with conventional processing technologies using ovens or autoclaves; however, the uneven temperature distribution caused by the non-uniform microwave field has a significant influence on the quality of the cured products. In this study, we propose a new idea to solve this problem, i.e., limiting the absorption of hot areas. Under such circumstances, cold ones can catch up with them more easily. To adjust the absorbing capability of the CFRP laminate, periodically arranged metallic resonance structures supported by a dielectric spacer are introduced on its surface. The dielectric spacer, made of epoxy matrix and strontium titanate particles, is designed to possess a dielectric constant positively related to temperatures. In this situation, the microwave absorption (2.45 GHz) of the metal-dielectric-CFRP configuration is changed from 97.6% at room temperature to 55.9% at 150 °C continuously. As a result, a reduction of 43.1% in maximum temperature difference and 89% in standard deviation has been achieved.

Precise spectrophotometric method for semitransparent metallic thin-film index determination using interference enhancement

A precise spectrophotometric method to determine the refractive index of a semitransparent metallic thin film is presented. This method relies on interference enhancement of the measured spectra, employing an opaque substrate with a dielectric spacer layer beneath the absorbing layer of interest to create interference fringes.The resulting spectral oscillations of the stack are highly sensitive to the properties of the top absorbing layer, allowing precise determination of the refractive index via fitting. The performance of this method is verified using simulations in comparison to the typical method of depositing the absorbing thin film directly onto a transparent substrate. An experimental demonstration is made for titanium thin films over the visible range (370-835 nm). The refractive index of these films is extracted from experimental data using a combination of the Modified Drude and Forouhi-Bloomer models. This method showed high repeatability and precision, and is verified for Ti films between 6-70 nm thickness.

Photo-Excited Switchable Terahertz Metamaterial Polarization Converter/Absorber

In this paper, a photo-excited switchable terahertz metamaterial (MM) polarization converter/absorber has been presented. The switchable structure comprises an orthogonal double split-ring resonator (ODSRR) and a metallic ground, separated by a dielectric spacer. The gaps of ODSRR are filled with semiconductor photoconductive silicon (Si), whose conductivity can be dynamically tuned by the incident pump beam with different power. From the simulated results, it can be observed that the proposed structure implements a wide polarization-conversion band in 2.01–2.56 THz with the conversion ratio of more than 90% and no pump beam power incident illuminating the structure, whereas two absorption peaks operate at 1.98 THz and 3.24 THz with the absorption rates of 70.5% and 94.2%, respectively, in the case of the maximum pump power. Equivalent circuit models are constructed for absorption states to provide physical insight into their operation. Meanwhile, the surface current distributions are also illustrated to explain the working principle. The simulated results show that this design has the advantage of the switchable performance afforded by semiconductor photoconductive Si, creating a path towards THz imaging, active switcher, etc.

Graphene Functionalization towards Developing Superior Supercapacitors Performance

Graphene is known as the miracle material of the 21st century for the wide band of participating applications and epic properties. Unlike the CVD monolayer graphene, Reduced graphene oxide (RGO) is a commercial form with mass production accessibility via numerous numbers of methods in preparation and reduction terms. Such RGO form showed exceptional combability in supercapacitors (SCs) where RGO is participated to promote flexibility, lifetime and performance. The chapter will illustrate 4 critical milestones of using graphene derivatives for achieving SC’s superior performance. The first is using oxidized graphene (GO) blind with polymer for super dielectric spacer. The other three types are dealing with electrolytic SCs based on RGO. Polyaniline (PANI) was grown on GO for exceptionally stable SCs of 100% retention. Silver decoration of RGO was used for all-solid-state printable device. The solid-state gel electrolyte was developed by adding GO to promote current rating. Finally, laser reduced graphene is presented as a one-step and versatile technique for micropatterning processing. The RGO reduction was demonstrated from a laser GO interaction perspective according to two selected key parameters; wavelength and pulse duration.

Accurate Spectrophotometric Method for Semitransparent Metallic Thin-film Index Determination Using Interference Enhancement

An accurate spectrophotometric method to determine the refractive index of a semitransparent metallic thin film is presented. This method relies on interference enhancement of the measured spectra, employing an opaque substrate with a dielectric spacer layer beneath the absorbing layer of interest to create interference fringes. The resulting spectral oscillations of the stack are highly sensitive to the properties of the top absorbing layer, allowing precise determination of the refractive index via fitting. The performance of this method is verified using simulations in comparison to the typical method of depositing the absorbing thin film directly onto a transparent substrate. An experimental demonstration is made for titanium thin films over the visible range (370-835 nm). The refractive index of these films is extracted from experimental data using a combination of the Modified Drude and Forouhi-Bloomer models. This method showed high repeatability and accuracy, and is verified for Ti films between 6-70 nm thickness.

Multi-Beam Steering for 6G Communications Based on Graphene Metasurfaces

As communication technology is entering the 6G era, a great demand for high-performance devices operating in the terahertz (THz) band has emerged. As an important part of 6G technology, indoor communication requires multi-beam steering and tracking to serve multi-users. In this paper, we have designed a graphene metasurface that can realize multi-beam steering for directional radiations. The designed metasurface consists of graphene ribbons, dielectric spacer, and metal substrate. By designing the graphene ribbons and controlling the applied voltage on them, we have obtained single-, double-, and triple-beam steering. In addition, we have also numerically calculated the far-field distributions of the steered multi-beam with a diffraction distance of 2 m. Our design has potential applications in future indoor directional 6G communications.