Synthesis of Boronated Amidines by Addition of Amines to Nitrilium Derivative of Cobalt Bis(Dicarbollide)

A series of novel cobalt bis(dicarbollide) based amidines were synthesized by the nucleophilic addition of primary and secondary amines to highly activated B-N+≡C–R triple bond of the propionitrilium derivative [8-EtC≡N-3,3′-Co(1,2-C2B9H10)(1′,2′-C2B9H11)]. The reactions with primary amines result in the formation of mixtures of E and Z isomers of amidines, whereas the reactions with secondary amines lead selectively to the E-isomers. The crystal molecular structures of E-[8-EtC(NMe2)=HN-3,3′-Co(1,2-C2B9H10)(1′,2′-C2B9H11)], E-[8-EtC(NEt2)=HN-3,3′-Co(1,2- C2B9H10)(1′,2′-C2B9H11)] and E-[8-EtC(NC5H10)=HN-3,3′-Co(1,2-C2B9H10)(1′,2′-C2B9H11)] were determined by single crystal X-ray diffraction.

(E)-1-(3,4-Dimethoxyphenyl)-2-methyl-3-phenylprop-2-en-1-one: A P-Type Acid-Stable Photochromic α-Methylchalcone

The α-methylated chalcone 3 with an electron-donor substituted A-aryl ring and an unsubstituted B-phenyl ring was synthesized by base-catalyzed aldehyde/acetophenone condensation. Compound 3 can be photo-switched from E→Z by irradiation with long-wavelength light λ > 350 nm, whereas irradiation with shorter wavelengths leads to photo-stationary states (PSS) with lower amounts of the Z-isomer. The limiting wavelength for fully equilibrated E⮀Z (PSS = 1) can be achieved around 240 nm. The stability of both E- and Z-isomers at the wavelength-dependent PSS under UV-irradiation between 250 and 350 nm is remarkably high as observed from UV and NMR spectroscopy. Compound 3 is fatigue resistant even after more than 10 days continuous irradiation and is also oxygenation-stable under singlet oxygen sensitization conditions. In remarkable contrast to many other α-methylated chalcones, no change in the E/Z-ratio was detected when PSS samples were treated with Broensted acids. The negative photochromic E→Z switch of 3 is accompanied by a conformational switch from the E-form in its preferred s-trans conformation to the Z-form in a distorted s-cis conformation (Es-c→Zs-t).

OH Group Effect in the Stator of β-Diketones Arylhydrazone Rotary Switches

The properties of several hydrazon-diketone rotary switches with OH groups in the stators (2-(2-(2-hydroxy-4-nitrophenyl)hydrazono)-1-phenylbutane-1,3-dione, 2-(2-(2-hydroxyphenyl)hydrazono)-1-phenylbutane-1,3-dione and 2-(2-(4-hydroxyphenyl)hydrazono)-1-phenylbutane-1,3-dione) were investigated by molecular spectroscopy (UV-Vis and NMR), DFT calculations (M06-2X/TZVP) and X-ray analysis. The results show that, when the OH group is in ortho position, the E’ and Z’ isomers are preferred in DMSO as a result of a stabilizing intermolecular hydrogen bonding with the solvent. The availability, in addition, of a nitro group in para position increases the possibility of deprotonation of the OH group in the absence of water. All studied compounds showed a tendency towards formation of associates. The structure of the aggregates was revealed by theoretical calculation and confirmed by X-ray analysis.

Stereodivergent Alkyne Hydrofluorination Using a Simple Practical Reagent

Vinyl fluorides play an important role in drug development as they serve as bioisosteres for peptide bonds and are found in a range of biologically active molecules. The discovery of safe, general and practical procedures to prepare vinyl fluorides remains an important goal and challenge for synthetic chemistry. Here we introduce an inexpensive and easily-handled reagent and report simple, scalable, and metal-free protocols for the regioselective and stereodivergent hydrofluorination of alkynes to access both the E and Z isomers of vinyl fluorides. These conditions were suitable for a diverse collection of alkynes, including several highly-functionalized pharmaceutical derivatives. Mechanistic and DFT studies support C–F bond formation through a vinyl cation intermediate, with the (E)- and (Z)-hydrofluorination products forming under kinetic and thermodynamic control, respectively.<br>

Stereodivergent Alkyne Hydrofluorination Using a Simple Practical Reagent

Vinyl fluorides play an important role in drug development as they serve as bioisosteres for peptide bonds and are found in a range of biologically active molecules. The discovery of safe, general and practical procedures to prepare vinyl fluorides remains an important goal and challenge for synthetic chemistry. Here we introduce an inexpensive and easily-handled reagent and report simple, scalable, and metal-free protocols for the regioselective and stereodivergent hydrofluorination of alkynes to access both the E and Z isomers of vinyl fluorides. These conditions were suitable for a diverse collection of alkynes, including several highly-functionalized pharmaceutical derivatives. Mechanistic and DFT studies support C–F bond formation through a vinyl cation intermediate, with the (E)- and (Z)-hydrofluorination products forming under kinetic and thermodynamic control, respectively.<br>

Stereodivergent Alkyne Hydrofluorination Using a Simple Practical Reagent

Vinyl fluorides play an important role in drug development as they serve as bioisosteres for peptide bonds and are found in a range of biologically active molecules. The discovery of safe, general and practical procedures to prepare vinyl fluorides remains an important goal and challenge for synthetic chemistry. Here we introduce an inexpensive and easily-handled reagent and report simple, scalable, and metal-free protocols for the regioselective and stereodivergent hydrofluorination of alkynes to access both the E and Z isomers of vinyl fluorides. These conditions were suitable for a diverse collection of alkynes, including several highly-functionalized pharmaceutical derivatives. Mechanistic and DFT studies support C–F bond formation through a vinyl cation intermediate, with the (E)- and (Z)-hydrofluorination products forming under kinetic and thermodynamic control, respectively.<br>

Stereodivergent Alkyne Hydrofluorination Using a Simple Practical Reagent

Vinyl fluorides play an important role in drug development as they serve as bioisosteres for peptide bonds and are found in a range of biologically active molecules. The discovery of safe, general and practical procedures to prepare vinyl fluorides remains an important goal and challenge for synthetic chemistry. Here we introduce an inexpensive and easily-handled reagent and report simple, scalable, and metal-free protocols for the regioselective and stereodivergent hydrofluorination of alkynes to access both the E and Z isomers of vinyl fluorides. These conditions were suitable for a diverse collection of alkynes, including several highly-functionalized pharmaceutical derivatives. Mechanistic and DFT studies support C–F bond formation through a vinyl cation intermediate, with the (E)- and (Z)-hydrofluorination products forming under kinetic and thermodynamic control, respectively.<br>

Synthesis, characterization and biological activity of Pt(II) complexes with steroidal thiosemicarbazones

In this work, Pt(II) complexes of previously synthesized steroidal thiosemicarbazones were synthesized and characterized. The ligands and their metal complexes were studied by analytical and spectroscopic data (elemental analysis, IR, 1D NMR and 2D NMR, HSQC, HMBC, NOESY, COSY), the analysis of which enabled complete 1H and 13C assignments of each compound including E and Z isomers. All the synthesized ligands and complexes were screened for their cytotoxic and antimicrobial activity. The results demonstrate that new steroidal thiosemicarbazone complexes were significantly less cytotoxic than corresponding steroidal thiosemicarbazones. Also, complexes show lower antimicrobial activity than the standard drugs, similar to the activity of the starting thiosemicarbazones.

SYNTHESIS OF INDIVIDUAL ISOMERS OF 2-(3-CHLOROPROP-2-EN-1-YL)CYCLOHEXANONE

Recently, vinyl chlorides has been increasingly used as electrophilic partners in various cross-coupling reactions. In contrast to inaccessible and expensive vinyl bromides and iodides, in many cases vinyl chlorides are highly active in the presence of not only traditional palladium complexes, but also economical and safe compounds of iron, cobalt and nickel. Earlier, we reported on the development of new approaches to the getting of stereochemically pure (E)- and (Z)-vinyl chlorides and their successful use at the synthesis of medicines and insect pheromones. Continuing this work, an effective method of the synthesis of (E)- and (Z)-isomers of 2-(3-chloroprop-2-en-1-yl)cyclohexanone - convenient precursors of 2-(alk-2-en-1-yl)cyclohexanones, known flavors and intermediates in the synthesis of polycyclic compounds was developed. In the reaction of ethyl 2-oxocyclohexanecarboxylate with the (E)- and (Z)-isomers of 1,3-dichloropropene under the phase-transfer catalysis conditions in the presence of K2CO3, the corresponding (E)- and (Z)-isomers of ethyl 1-(3-chloroprop-2-en-1-yl)-2-oxocyclohexanecarboxylate were obtained in high yields (80-86%), without allyl rearrangement. The complete retention of the configuration of the chlorovinyl group is observed. Standard methods of the decarboxylation of isomers of ethyl 1-(3-chloroprop-2-en-1-yl)-2-oxocyclohexanecarboxylate under acidic or basic conditions result in very average yields of the corresponding chlorovinyl ketones. The best results were obtained by their decarbalkoxylation in slightly modernized Krapcho conditions. Carrying out reaction in N-methylpyrrolidone at 140-150 °C in the presence of 3 eq. LiCl and 2 eq. of H2O leads to individual (E)- and (Z)-isomers of 2-(3-chloroprop-2-en-1-yl)cyclohexanone in 79-82% yields and a stereochemical purity of ~ 99%. The structure of the obtained compounds were confirmed by HRGC, NMR, and GC/MS data. The configuration of the vinyl group was proved by the coupling constants of the vinyl hydrogens, equal to 13.2-13.4 and 7.0-7.3 Hz for the (E)- and (Z)-products, respectively, as well as by the downfield shift of the allyl carbon atom of trans-isomers by ~4 ppm as compared to the cis-analogs.