Management of Powdery Mildew on Ninebark Using Sanitizers, Biorational Products, and Fungicides

Ninebark (Physocarpus opulifolius) is a popular ornamental shrub and considered a hardy and tough plant that can thrive in different environmental conditions and resist diseases. However, powdery mildew, caused by Podosphaera physocarpi, can severelyaffect ninebark, deteriorating the ornamental value and making them unmarketable. Only a few studies have been done in managing powdery mildew of ninebark. The current study focuses on evaluating and identifying effective products (sanitizers, biorational products, and fungicides) for the management of powdery mildew disease of ninebark. A total of 12 treatments, including nontreated control, were studied. The experiment was arranged in randomized complete block design with four-single ‘Mindia Coppertina®’ ninebark plant per treatment and repeated twice. Powdery mildew disease severity, growth parameters, and phytotoxicity were assessed in the study. All treatments significantly reduced the powdery mildew disease severity and disease progress [area under disease progress curve (AUDPC)] compared with the nontreated control. The treatments, such as azoxystrobin + benzovindiflupyr at 0.17 and 0.23 g·L–1 total active ingredients (a.i.) applied, chlorothalonil + propiconazole at 1.12 mL·L–1 total a.i. applied, azoxystrobin + tebuconazole at 0.11 and 0.16 g·L–1 total a.i. applied, and giant knotweed extract [Reynoutria sachalinensis (0.5 mL·L–1 total a.i. applied)] were the most effective treatments in reducing disease severity and disease progress in both trials. The treatments had no significant effects on the plant growth parameters such as height and width. In Expt. 2, azoxystrobin + benzovindiflupyr and hydrogen peroxide + peroxyacetic acid treated plants showed the low level of phytotoxic symptoms. The phytotoxicity of these two treatments in Expt. 2 could be related to higher environmental temperature during the experimental period.

Flavan-3-ols and Proanthocyanidins in Japanese, Bohemian and Giant Knotweed

Flavan-3-ols and proanthocyanidins of invasive alien plants Japanese knotweed (Fallopia japonica Houtt.), giant knotweed (Fallopia sachalinensis F. Schmidt) and Bohemian knotweed (Fallopia × bohemica (Chrtek & Chrtkova) J.P. Bailey) were investigated using high performance thin-layer chromatography (HPTLC) coupled to densitometry, image analysis and mass spectrometry (HPTLC–MS/MS). (+)-Catechin, (−)-epicatechin, (−)-epicatechin gallate and procyanidin B2 were found in rhizomes of these three species, and for the first time in Bohemian knotweed. (−)-Epicatechin gallate, procyanidin B1, procyanidin B2 and procyanidin C1 were found in giant knotweed rhizomes for the first time. Rhizomes of Bohemian and giant knotweed have the same chemical profiles of proanthocyanidins with respect to the degree of polymerization and with respect to gallates. Japanese and Bohemian knotweed have equal chromatographic fingerprint profiles with the additional peak not present in giant knotweed. Within the individual species giant knotweed rhizomes and leaves have the most similar fingerprints, while the fingerprints of Japanese and Bohemian knotweed rhizomes have additional peaks not found in leaves. Rhizomes of all three species proved to be a rich source of proanthocyanidins, with the highest content in Japanese and the lowest in Bohemian knotweed (based on the total peak areas). The contents of monomers in Japanese, Bohemian and giant knotweed rhizomes were 2.99 kg/t of dry mass (DM), 1.52 kg/t DM, 2.36 kg/t DM, respectively, while the contents of dimers were 2.81 kg/t DM, 1.09 kg/t DM, 2.17 kg/t DM, respectively. All B-type proanthocyanidins from monomers to decamers (monomers—flavan-3-ols, dimers, trimers, tetramers, pentamers, hexamers, heptamers, octamers, nonamers and decamers) and some of their gallates (monomer gallates, dimer gallates, dimer digallates, trimer gallates, tetramer gallates, pentamer gallates and hexamer gallates) were identified in rhizomes of Bohemian knotweed and giant knotweed. Pentamer gallates, hexamers, hexamer gallates, nonamers and decamers were identified for the first time in this study in Bohemian and giant knotweed rhizomes.

Fallopia sachalinensis (giant knotweed).

F. sachalinensis is a highly invasive rhizomatous perennial plant capable of reaching 4 m in height, outcompeting and displacing native species in particular in riparian zones which it prefers. It has spread to most areas in its exotic range without the aid of seed dispersal though it does provide pollen for the fertilization of F. japonica plants to produce the highly invasive Fallopia x bohemica. Though not considered as problematic as Japanese knotweed (F. japonica), eradication is a real challenge and often unachievable, especially with restrictions applied to chemical use on or near water thus methods of control are limited.

Patterns of population genomic diversity in the invasive Japanese knotweed species complex

PremiseInvasive species are expected to experience a reduction in genetic diversity due to founder effects, which should limit their ability to adapt to new habitats. Still, many invasive species achieve widespread distributions and dense populations. This paradox of invasions could potentially be overcome through multiple introductions or hybridization, both of which increase genetic diversity. We conducted a population genomics study of Japanese knotweed (Reynoutria japonica), which is a polyploid, clonally reproducing invasive species that has been notoriously successful worldwide despite supposedly low genetic diversity.MethodsWe used Genotyping-by-Sequencing to collect 12,912 SNP markers from 88 samples collected at 38 locations across North America for the species complex. We used non-alignment based k-mer hashing analysis in addition to traditional population genetic analyses to account for the challenges of genotyping polyploids.ResultsGenotypes conformed to three genetic clusters, likely representing Japanese knotweed, Giant knotweed, and hybrid Bohemian knotweed. We found that, contrary to previous findings, the Japanese knotweed cluster had substantial genetic diversity, though it had no apparent genetic structure across the landscape. In contrast, Giant knotweed and hybrids showed distinct population groups. We did not find evidence of Isolation-by-Distance in the species complex, likely reflecting the stochastic introduction history of this species complex. Among species, we found no correlations between SNPs and several temperature- and precipitation-based climatic variables.ConclusionsThe results indicate that clonal invasive species can show substantial genetic diversity and can be successful at colonizing a variety of habitats without showing evidence of local adaptation or genetic structure.

Leaves of Invasive Plants—Japanese, Bohemian and Giant Knotweed—The Promising New Source of Flavan-3-ols and Proanthocyanidins

This is the first report on identification of all B-type proanthocyanidins from monomers to decamers (monomers—flavan-3-ols, dimers, trimers, tetramers, pentamers, hexamers, heptamers, octamers, nonamers, and decamers) and some of their gallates in leaves of Japanese knotweed (Fallopia japonica Houtt.), giant knotweed (Fallopia sachalinensis F. Schmidt) and Bohemian knotweed (Fallopia × bohemica (Chrtek & Chrtkova) J.P. Bailey). Flavan-3-ols and proanthocyanidins were investigated using high performance thin-layer chromatography (HPTLC) coupled to densitometry, image analysis, and mass spectrometry (HPTLC–MS/MS). All species contained (−)-epicatechin and procyanidin B2, while (+)-catechin was only detected in Bohemian and giant knotweed. (−)-Epicatechin gallate, procyanidin B1 and procyanidin C1 was only confirmed in giant knotweed. Leaves of all three knotweeds have the same chemical profiles of proanthocyanidins with respect to the degree of polymerization but differ with respect to gallates. Therefore, chromatographic fingerprint profiles of proanthocyanidins enabled differentiation among leaves of studied knotweeds, and between Japanese knotweed leaves and rhizomes. Leaves of all three species proved to be a rich source of proanthocyanidins (based on the total peak areas), with the highest content in giant and the lowest in Japanese knotweed. The contents of monomers in Japanese, Bohemian and giant knotweed were 0.84 kg/t of dry weight (DW), 1.39 kg/t DW, 2.36 kg/t, respectively, while the contents of dimers were 0.99 kg/t DW, 1.40 kg/t, 2.06 kg/t, respectively. Giant knotweed leaves showed the highest variety of gallates (dimer gallates, dimer digallates, trimer gallates, tetramer gallates, pentamer gallates, and hexamer gallates), while only monomer gallates and dimer gallates were confirmed in Japanese knotweed and monomer gallates, dimer gallates, and dimer digallates were detected in leaves of Bohemian knotweed. The profile of the Bohemian knotweed clearly showed the traits inherited from Japanese and giant knotweed from which it originated.

EVALUATION OF GIANT KNOTWEED AND MISCANTHUS AS PERSPECTIVE ENERGY PLANTS AND ASSESSMENT OF PRODUCED BIOFUEL QUALITY INDICATORS

Giant knotweed (Fallopia sachalinensis) was chosen as a perspective energy plant because it is not a soil demanding plant and belongs to the most efficient herbs in Central Europe as regards high biomass yield. Miscanthus (Miscanthus sinensis) was chosen as a control one. Knotweeds are comparable to wood briquettes and pellets because of their similarparallel mechanical and thermal features. These plants grow in forest environment with an approximate yield productivity of 15 t ha-1 d.b. (dry basis). Experimental research investigations were performed in the laboratories of Aleksandras Stulginskis University. Giant knotweed and miscanthus biomass was cut, chopped, milled and granulated with a small capacity granulator (250–300 kg h-1). Quality parameters of plant preparative and use for energetical objectives were determined. Plant chaff and mill fraction compositions were determined, and quality indicators of the produced pellets were measured – moisture content, density, resistance to compression, elemental composition, ash content and calorific value, also bulk density, fall and natural slope angles. Moisture content reached 7.8 ± 0.8 %; pellet density was 1227.3 ± 48.6 kg m-3. Resistance to compression of giant knotweed pellet was 850 N. Determined ash content was 4.3 ± 0.01 %, and net calorific value of knotweed dry mass was of sufficient height and reached 18.96 ± 0.28 MJ kg-1. Bulk density reached 509.9 kg m-3, natural slope angle was 31.7 0 and fall angle was 49.3 0.