scholarly journals EVALUATION OF GIANT KNOTWEED AND MISCANTHUS AS PERSPECTIVE ENERGY PLANTS AND ASSESSMENT OF PRODUCED BIOFUEL QUALITY INDICATORS

2018 ◽  
Author(s):  
Dionizas STREIKUS ◽  
Algirdas JASINSKAS ◽  
Rolandas DOMEIKA ◽  
Sigitas ČEKANAUSKAS ◽  
Nerijus PEDIŠIUS ◽  
...  
Keyword(s):  
Moisture Content ◽  
Bulk Density ◽  
Quality Indicators ◽  
Slope Angle ◽  
Calorific Value ◽  
Ash Content ◽  
Miscanthus Sinensis ◽  
Forest Environment ◽  
Natural Slope ◽  
Giant Knotweed

Giant knotweed (Fallopia sachalinensis) was chosen as a perspective energy plant because it is not a soil demanding plant and belongs to the most efficient herbs in Central Europe as regards high biomass yield. Miscanthus (Miscanthus sinensis) was chosen as a control one. Knotweeds are comparable to wood briquettes and pellets because of their similarparallel mechanical and thermal features. These plants grow in forest environment with an approximate yield productivity of 15 t ha-1 d.b. (dry basis). Experimental research investigations were performed in the laboratories of Aleksandras Stulginskis University. Giant knotweed and miscanthus biomass was cut, chopped, milled and granulated with a small capacity granulator (250–300 kg h-1). Quality parameters of plant preparative and use for energetical objectives were determined. Plant chaff and mill fraction compositions were determined, and quality indicators of the produced pellets were measured – moisture content, density, resistance to compression, elemental composition, ash content and calorific value, also bulk density, fall and natural slope angles. Moisture content reached 7.8 ± 0.8 %; pellet density was 1227.3 ± 48.6 kg m-3. Resistance to compression of giant knotweed pellet was 850 N. Determined ash content was 4.3 ± 0.01 %, and net calorific value of knotweed dry mass was of sufficient height and reached 18.96 ± 0.28 MJ kg-1. Bulk density reached 509.9 kg m-3, natural slope angle was 31.7 0 and fall angle was 49.3 0.

scholarly journals Improving the physical, mechanical and energetic properties of Quercus spp. wood pellets by adding pine sawdust

PeerJ ◽  
2020 ◽  
Vol 8 ◽  
pp. e9766
Author(s):  
Víctor Daniel Núñez-Retana ◽  
Rigoberto Rosales-Serna ◽  
José Ángel Prieto-Ruíz ◽  
Christian Wehenkel ◽  
Artemio Carrillo-Parra
Keyword(s):  
Moisture Content ◽  
Bulk Density ◽  
Particle Density ◽  
Resistance Index ◽  
Calorific Value ◽  
Ash Content ◽  
Wood Pellets ◽  
Pine Sawdust ◽  
Mechanical Hardness ◽  
Species Mixture

Background Biomass usage for energy purposes has emerged in response to global energy demands and environmental problems. The large amounts of by-products generated during logging are rarely utilized. In addition, some species (e.g., Quercus spp.) are considered less valuable and are left in the cutting areas. Production of pellets from this alternative source of biomass may be possible for power generation. Although the pellets may be of lower quality than other types of wood pellets, because of their physical and technological properties, the addition of different raw materials may improve the characteristics of the oak pellets. Methods Sawdust from the oak species Quercus sideroxyla, Q. rugosa, Q. laeta and Q. conzattii was mixed with sawdust from the pine Pinus durangensis in different ratios of oak to pine (100:0, 80:20, 60:40, 40:60 and 20:80). Physical and mechanical properties of the pellets were determined, and calorific value tests were carried out. For each variable, Kolmogorov–Smirnov normality and Kruskal–Wallis tests were performed and Pearson’s correlation coefficients were determined (considering a significance level of p < 0.05). Results The moisture content and fixed carbon content differed significantly (p < 0.05) between the groups of pellets (i.e., pellets made with different sawdust mixtures). The moisture content of all pellets was less than 10%. However, volatile matter and ash content did not differ significantly between groups (p ≥ 0.05). The ash content was less than 0.7% in all mixtures. The addition of P. durangensis sawdust to the mixtures improved the bulk density of the pellets by 18%. Significant differences (p < 0.05) in particle density were observed between species, mixtures and for the species × mixture interaction. The particle density was highest in the 80:20 and 60:40 mixtures, with values ranging from 1,245 to 1,349 kg m−3. Bulk density and particle density of the pellets were positively correlated with the amount of P. durangensis sawdust included. The mechanical hardness and impact resistance index (IRI) differed significantly (p < 0.05) between groups. The addition of pine sawdust decreased the mechanical hardness of the pellets, up to 24%. The IRI was highest (138) in the Q. sideroxyla pellets (100:0). The mechanical hardness and IRI of the pellets were negatively correlated with the amount of P. durangensis sawdust added. The bulk density of the pellets was negatively correlated with mechanical hardness and IRI. The calorific value of mixtures and the species × mixture interaction differed significantly between groups. Finally, the mean calorific value was highest (19.8 MJ kg−1) in the 20:80 mixture. The calorific value was positively related to the addition of P. durangensis sawdust.

scholarly journals Analysis of the Quality of Mixed Coconut Shell Waste Briquettes with Various Biomass Additives as Alternative Fuels

2021 ◽  
Vol 4 (2) ◽  
Author(s):  
Yusraida Khairani Dalimunthe ◽  
Sugiatmo Kasmungin ◽  
Listiana Satiawati ◽  
Thariq Madani ◽  
Teuku Ananda Rizky
Keyword(s):  
Moisture Content ◽  
Calorific Value ◽  
Volatile Matter ◽  
Matter Content ◽  
Ash Content ◽  
Coconut Shell ◽  
Bamboo Charcoal ◽  
A Value ◽  
Shell Waste

The purpose of this study was to see the best quality of briquettes from the main ingredient of coconut shell waste<br />with various biomass additives to see the calorific value, moisture content, ash content, and volatile matter<br />content of the biomass mixture. Furthermore, further research will be carried out specifically to see the quality of<br />briquettes from a mixture of coconut shell waste and sawdust. The method used in this research is to conduct a<br />literature study of various literature related to briquettes from coconut shell waste mixed with various additives<br />specifically and then look at the best quality briquettes produced from these various pieces of literature. As for<br />what is determined as the control variable of this study is coconut shell waste and as an independent variable,<br />namely coffee skin waste, rice husks, water hyacinth, Bintaro fruit, segon wood sawdust, coconut husk, durian<br />skin, bamboo charcoal, areca nut skin, and leather waste. sago with a certain composition. Furthermore, this<br />paper also describes the stages of making briquettes from coconut shell waste and sawdust for further testing of<br />the calorific value, moisture content, ash content, volatile matter content on a laboratory scale for further<br />research. From various literatures, it was found that the highest calorific value was obtained from a mixture of<br />coconut shell waste and bamboo charcoal with a value of 7110.7288 cal / gr and the lowest calorific value was<br />obtained from a mixture of coconut shell waste and sago shell waste with a value of 114 cal / gr, then for the value<br />The highest water content was obtained from a mixture of coconut shell waste and rice husk with a value of<br />37.70% and the lowest water content value was obtained from a mixture of coconut shell waste 3.80%, then for the<br />highest ash content value was obtained from a mixture of coconut shell waste and coffee skin with a value of<br />20.862% and for the lowest ash content value obtained from a mixture of coconut shell and Bintaro fruit waste,<br />namely 2%, and for the highest volatile matter content value obtained from a mixture of coconut shell and coconut<br />husk waste with a value of 33.45% and for the value of volatile matter levels The lowest was obtained from a<br />mixture of coconut shell waste and sago skin waste with a value of 33 , 45%.

scholarly journals Energy Resource of Charcoals Derived from Some Tropical Fruits Nuts Shells

2019 ◽  
Vol 9 (1) ◽  
pp. 29-35 ◽  
Author(s):  
Damgou Mani Kongnine ◽  
Pali Kpelou ◽  
N’Gissa Attah ◽  
Saboilliè Kombate ◽  
Essowè Mouzou ◽  
...  
Keyword(s):  
Bulk Density ◽  
Alternative Fuels ◽  
Unit Volume ◽  
Calorific Value ◽  
Ash Content ◽  
Maximum Temperature ◽  
Tropical Fruits ◽  
Teak Wood ◽  
Sulfide Content ◽  
Coconut Shells

This work was focused on carbonizing four tropical fruits shells wastes such as: coconut shells (CS), palmyra shells (PS), doum palm shells (DPS), whole fruit of doum palm (WFDP) and teak wood (TW) used as control. The aim was to investigate the potential of those biochar to be used as an alternative energy source in replacement ofcharcoal. The raw biomasses samples were carbonized under the same conditions and some combustion characteristics of the obtained biochar such as lower calorific value, energy per unit volume associated to bulk density, ash content, moisture content and ash mineral content were investigated. The temperature in the furnace was estimated during carbonization process using a K-type thermocouple. The thermal profile of the studied raw biomasses reveals three phases of carbonization. The biochar yield drops significantly for all biomasses as the final maximum temperature increases. The average yields obtained ranged from 37.81 % for palmyra shells to 27.57 % for the doum palm shells. The highest yield achieved was 42.32 % obtained at 280 °C for palmyra shells, the lowest yield (24.42 %) was recorded at the highest maximum temperature of 590 ° C for doum palm shells. The results of energy parameters of the studied biochar showed that coconut shells charcoal presented the highest lower calorific value (28.059 MJ.kg-1), followed by doum palm shells (26.929 MJ.kg-1) when, with 25.864 MJ.kg-1, whole fruit of doum palm charcoal showed the lowest lower calorific value. Similarly, with the highest bulk density of 0.625 g/cm3 coconut shells charcoal presented the highest energy per unit volume (17536.88 J/cm3), whereas with the lowest bulk density of 0.415 g/cm3, whole fruit of doum palm charcoal presented the lowest energy per unit volume. The ash content analysis showed that whole fruit of doum palm had the highest ash content (18.75 %) and palmyra nut shells charcoal (8.42 %).Teak wood charcoal, took as control, has the highest lower calorific value (32.163 MJ.kg-1), less dense as coconut shell (0.43 g/cm3), his energy per unit of volume is 13830.09 j/cm3 but the lowest value of as content (2.90 %). Among these biomasses charcoals, only whole fruit of doum palm charcoal ash showed a high chloride and sulfide content respectively  9.73 % and 1.75 % in weight. From these results, the produced charcoals could be used as alternative fuels except for whole fruits of doum palm charcoal which chloride and sulfide content were found high. ©2020. CBIORE-IJRED. All rights reserved

Making Charcoal Briquettes from Corncobs Organic Waste Using Variation of Type and Percentage of Adhesives

2017 ◽  
Vol 2 (1) ◽  
pp. 43 ◽  
Author(s):  
Lilih Sulistyaningkarti ◽  
Budi Utami
Keyword(s):  
Moisture Content ◽  
Carbon Content ◽  
Wheat Flour ◽  
Alternative Energy ◽  
Organic Waste ◽  
Calorific Value ◽  
Ash Content ◽  
Volatile Content ◽  
Biomass Waste ◽  
Tapioca Flour

This study aimed to (1) make charcoal briquettes from corncobs organic waste; (2) determine the right type of adhesive to make a corncobs charcoal briquette to produce good quality briquettes; (3) determine the appropriate percentage of adhesive to produce corncobs briquettes to produce good quality briquettes; and (4) know the best characteristics of corncobs charcoal briquettes which include moisture content, volatile content, ash content, carbon content and caloric value. The sample used was corncob obtained from a corn farmer in Pasekan Village, Wonogiri regency. This research used experimental method in laboratory with several stages, namely: (1) preparation of materials; (2) carbonization; (3) crushing and sifting of charcoal (4) mixing charcoal with adhesive and water; (5) briquetting; (6) briquette drying; And (7) analysis of briquette quality. This adhesive types used in this research were tapioca flour and wheat flour and the percentage of adhesive material were 5%, 10% and 15% from total weight of charcoal powder. The result of the research were: (1) charcoal briquettes as alternative energy source can be made from biomass waste (corncobs organic waste); (2) charcoal briquettes from organic corncobs wastes using tapioca flour adhesives have better quality than using wheat flour adhesives; (3) the both charcoal briquettes using 5% of tapioca flour adhesive and 5% wheat flour adhesives have better quality than 10% and 15% in terms of moisture content, volatile content, ash content, carbon content and calorific value; and (4) the best characteristics obtained are for the charcoal briquettes using 5% of tapioca flour adhesive, which have water content of 3,665%; volatile matter amounting of 11.005%; ash content of 4.825%; fixed carbon content of 80.515%; and high heat value of 5661,071%.

scholarly journals Physicochemical Characteristics of Black Bean Protein Concentrate Based on the Variation of Heating Time

2021 ◽  
Vol 1 (1) ◽  
pp. 12-18
Author(s):  
Syane Palijama ◽  
Priscillia Picauly ◽  
Windarti Windarti
Keyword(s):  
Moisture Content ◽  
Water Absorption ◽  
Protein Content ◽  
Bulk Density ◽  
Physicochemical Characteristics ◽  
Heating Time ◽  
Ash Content ◽  
Protein Concentrate ◽  
Black Bean ◽  
Bean Protein

One type of beans that can be used as a source of protein is the black bean (Phaseolus vulgaris. L); because it has a sufficiently high protein content of 16.6%, it has the potential to be developed into protein concentrate. This study aimed to characterize the physicochemical characteristics of black bean protein concentrate based on heating time. An experiment was carried out and arranged in a Completely Randomized Design, with four levels of treatments, i.e. heating time of 15 minutes, 30 minutes, 45 minutes, and 60 minutes. The observed variables were yield, bulk density, water absorption, protein content, moisture content, and ash content. The results showed that the yield value was 7.66 - 12.11%, bulk density 0.78 - 0.81 g/mL, water absorption 1.84 - 1.97%, protein content 71.39 - 76.00%, moisture content 11.85 - 12.94% and ash content 3.30 - 3.57%.

scholarly journals Assessment of load and quality of logging residues from clear-felling areas in Järvselja: a case study from Southeast Estonia

2020 ◽  
Vol 66 (1) ◽  
pp. 3-11 ◽  
Author(s):  
Vahur Kurvits ◽  
Katri Ots ◽  
Ahto Kangur ◽  
Henn Korjus ◽  
Peeter Muiste
Keyword(s):  
Moisture Content ◽  
Renewable Energy Sources ◽  
Calorific Value ◽  
Dry Weight ◽  
Alnus Glutinosa ◽  
Ash Content ◽  
Black Alder ◽  
Logging Residues ◽  
Small Admixture ◽  
Combustion Tests

AbstractThe properties of biomass-based fuel and combustion tests showed that logging residues are promising renewable energy sources. The data used in this study were collected from four clear-felling areas in Järvselja Training and Experimental Forest Centre, Southeast Estonia in 2013–2014. Logging was carried out by harvesters in Scots pine (Pinus sylvestris L.), Norway spruce (Picea abies [L.] Karst.), silver birch (Betula pendula Roth.) and black alder (Alnus glutinosa L. Gaertn.) dominated stands with a small admixture of other tree species according to the cut-to-length method and logging residues were placed in heaps. The aim of this research is to assess different characteristics of logging residues (quantity, moisture content, energetic potential, ash content and amount) in clear-felling areas. The highest load of slash was measured on the birch dominated study site, where the dry weight of the logging residues was 29 t ha−1. Only the branch fraction moisture content on the black alder dominated site (35.4%) was clearly different from respective values on other sites (21.6–25.4%). The highest calorific value of the residues was assessed with the residues from the birch dominated site, where in moist sample it was 365 GJ ha−1 and in dry matter 585 GJ ha−1. The heating value of the fresh residues is highest in coniferous trees. The highest ash content in branch segments was registered for the black alder dominated site. Järvselja data indicate higher quality in conifer dominated sites, yet a higher load of logging residues in broadleaf dominated stands.

scholarly journals THE STUDY OF QUALITY INDICATORS AND FRACTIONAL COMPOSITION OF WHEAT GRAIN PROTEIN OF SOUTHERN REGIONS OF UKRAINE

2021 ◽  
Vol 20 (4) ◽  
pp. 4-10
Author(s):  
A. Penaki ◽  
A. Borta
Keyword(s):  
Moisture Content ◽  
Protein Content ◽  
Bulk Density ◽  
Quality Indicators ◽  
Protein Structures ◽  
Protein Fractions ◽  
Falling Number ◽  
Wheat Grain ◽  
Molecular Weights

The results of studies of the quality of food and non-food grain of wheat from the southern regions of Ukraine in 2016 harvest are presented. The indicators of the quality of wheat grain were determined, the uniformity of their distribution in different classes of wheat was assessed, the content of protein fractions of the gluten complex and the molecular weights of individual protein structures were determined. It was found that the studied 13 samples of wheat grain had the following quality indicators: moisture content 9.4 ... 13.5%, bulk density 731 ... 814 g/l, protein content 10.1 ... 13.2%, gluten content 16.4 ... 25.6%, gluten quality 50 ... 110 units of the IDK device, falling number 311 ... 493 s, grain admixture 1.2 ... 10.5%, grains damaged by a wheat bug, 0.1 ... 10.1%. It was noted that the bulk density of all samples of wheat of 2 ... 6 classes exceeded the standard values in each class. In terms of protein content, 2 from 3 samples of class 5 wheat and 1 from 2 samples of 6 class exceeded the standard value of class 3 wheat (≥11.0%). The same was observed for these samples and for the gluten content (≥18%). Almost all grain samples, except for 2 samples of the 5th class and 2 samples of the 6th class, met the requirements of wheat of the 2nd class (45 ... 100 units device VDK). The falling number of all samples was high and significantly exceeded the normalized value (180 s), even for class 2 wheat. It was found that the uniformity of the distribution of individual quality indicators in different classes of wheat grain by the coefficient of variation is not the same. Such indicators of grain quality as moisture content, bulk density and protein content in different samples of the south of Ukraine in 2016 harvest fluctuated weakly (V≤10%), in terms of the amount of gluten and the falling number fluctuations were average (10% ≤V≤20%). Fluctuations in the content of grain impurities and grains damaged by the wheat bug are big (V≥20%). For the last indicator, fluctuations relative to the average are very large and exceed 120 %. This indicates that in different areas where wheat was grown, the infestation by the wheat bug was very different. It was shown that regardless of the total amount of protein determined by the Infratec FOSS express analyzer, four protein fractions of the gluten complex (albumins, globulins, gliadins and glutenins) are present in all grain classes, and the molecular weights of the protein structures of the main fractions are within small limits, which are in kDa - for albumins and globulins 20...30, gliadins 27.. 100 and glutenins 30...35. It was noted that in the varietal wheat "Chernobrova" albumins and globulins have a slightly higher molecular weight (30...40 kDa) than in non-varietal wheat.

scholarly journals PENGARUH SUHU DAN WAKTU KARBONISASI TERHADAP NILAI KALOR DAN KARAKTERISTIK PADA PEMBUATAN BIOARANG BERBAHAN BAKU PELEPAH AREN (Arenga pinnata)

2015 ◽  
Vol 4 (2) ◽  
pp. 46-52
Author(s):  
Erwin Junary ◽  
Julham Prasetya Pane ◽  
Netti Herlina
Keyword(s):  
Moisture Content ◽  
Carbon Content ◽  
Calorific Value ◽  
Volatile Matter ◽  
Matter Content ◽  
Ash Content ◽  
Alternative Source ◽  
Renewable Biomass ◽  
Volatile Matter Content ◽  
Temperature Variable

The availability of the petroleum fuels that deprived from fossil is depleted with the increase of human population. The challenge for this fuel shortage crisis can certainly be anticipated with the manufacture of fuels deprived from renewable biomass. The study of this research is to create a biocharcoal deprived from sugar palm (Arenga pinnata) with the optimum carbonization time and temperature in order to obtain a biocharcoal with the highest calorific value. Biocharcoal is a charcoal created from biomass. The study of the determination of the optimum conditions for the manufacture of biocharcoal from sugar palm (Arenga pinnata) has a temperature variable of 300, 350, 400, 450 and 500 0C and time variable of 60, 90 and 120 minutes. Sugar palm was first cut into a small pieces and dried up under the sun and then put into a furnace to carbonate it according to the predetermined variables. The product from furnace was then put inside a desicator to cool it off for 30 minutes and then analyze it with moisture content test, ash content test, volatile matter content test, carbon content test and calorific value test. The best result was obtained at the temperature of 350 0C and 120 minutes of carbonization with the calorific value of 8611,2581 cal/gr, moisture content of %, ash content of %, volatile matter content of % and carbon content of %. Based of the calorific value obtained, the result shows that sugar palm (Arenga pinnata) biocharcoal could be utilize as an renewable alternative source fuels

scholarly journals Pengolahan Sampah Organik dan Limbah Biomassa dengan Teknologi Olah Sampah di Sumbernya

2021 ◽  
Vol 6 (3) ◽  
Author(s):  
I Made Indradjaja M. Brunner ◽  
Arief Norhidayat ◽  
Satria M. Brunner
Keyword(s):  
Moisture Content ◽  
Water Content ◽  
Early Stage ◽  
Calorific Value ◽  
Ash Content ◽  
Waste Processing ◽  
Biomass Waste ◽  
Aerobic Activity ◽  
Three Stages ◽  
Biomass Pellet

Solid Waste Processing Technology at the Source (TOSS) is an alternative method in processing organic and biomass waste on a communal scale. The processing of organic and biomass waste material is carried out in three stages of the process: biodrying which utilizes the aerobic activity of microorganisms; chopping which is intended to refine the material, and pelletization to compact the material into biomass pellets. The biodrying process in bamboo boxes is able to reduce the water content in organic and biomass waste within 4-5 days. Sorting of non-organic materials can be done at an early stage before or after the biodrying process. Sorting is required before chopping and pelletizing process to avoid unnecessary machine break down. The biomass pellet which is the final product has a diameter of about 10 mm with a length between 10-40 mm, a calorific value between 3000-4000 kcal/kg, and a moisture content of up to 15%. Compared to coal, biomass pellets tend to have higher volatile and ash content, while lower ash and sulfur content.

scholarly journals PENGARUH KOMPOSISI PEREKAT TEPUNG PADA BIOBRIKET LIMBAH BAGLOG JAMUR

2017 ◽  
Vol 18 (2) ◽  
Author(s):  
Widodo Hari Prabowo ◽  
Muhammad Viki Lutfiana ◽  
Rosid Rosid ◽  
Muhammad Burhanuddin Ubaidillah
Keyword(s):  
Moisture Content ◽  
Carbon Content ◽  
Alternative Energy ◽  
Fossil Fuel ◽  
Calorific Value ◽  
Ash Content ◽  
Volatile Substance ◽  
Drop Test ◽  
Volatile Substances ◽  
Alternative Energy Sources

ABSTRAK Energi yang berasal dari biomassa misalnya limbah baglog, yang selama ini dibuang atau tidak dimanfaatkan, merupakan limbah yang dapat dikonfersi menjadi sumber energi alternatif pengganti bahan bakar fosil. Limbah baglog  jamur dimanfaatkan sebagai bahan bakar dengan cara, mengubah limbah tersebut menjadi biobriket. Tujuan penelitian dilakukan untuk pengkajian laju pembakaran, nilai kalor, kadar abu, kadar air, kadar zat yang menguap, kadar karbon dan drop test pada biobriket. Metode yang digunakan dalam pembuatan menggunakan perbandingan A (1:1:1) dengan komposisi tepung kanji 250 gram limbah baglog 250 gram dan air 250 ml, perbandingan B (1:2:2) dengan komposisi tepung kanji 250 gram limbah baglog 500 gram dan air 500 ml, perbandingan C (1:3:3) dengan komposisi tepung kanji 250 gram  limbah baglog 1000 gram dan air 1000 ml. Pembutan yang pertama dengan penghancuran limbah baglog dan pengeringan, pencampuran tepung, limbah baglog dan air, pengepresan biobriket kemudian dikeringkan. Hasil penelitian memperoleh nilai kalor, kadar air, kadar karbon dan kadar zat yang menguap terdapat pada biobriket sampel A (1:1:1) sebesar 4065,69 kal/g, 5%, 15,4%, dan 71,4 %  untuk kadar abu terbaik terdapat pada sampel B (1:2:2) sebesar 4,8%. Kata kunci: Limbah baglog, biobriket, bahan bakar fosil, jamur tiram  ABSTRACT Energy derived from biomass such as baglog waste that has been disposed or not utilized, is a waste that can be converted into alternative energy sources of fossil fuel. Wastes baglog mushrooms are used as fuel by the way, turning the waste into bio briquette. The aim of this research is to test the combustion rate, calorific value, ash content, moisture content, volatile substance content, carbon content and drop test on bio briquett. The method used in the preparation uses A (1: 1: 1) comparison with starchy flour composition 250 grams of baglog 250 grams and 250 ml water, B ratio (1: 2: 2) with  starchy flour composition 250 grams baglog 500 grams and water 500 ml, C ratio (1: 3: 3) with starch flour composition 250 grams of baglog waste 1000 grams and water 1000 ml. Making the first with the destruction of baglog waste and drying, mixing flour, baglog waste and water, briquette pressing then dried. The results of the research were obtained values of caloric, water content, carbon content and the content of volatile substances in A (1: 1: 1) biobriket of 4065.69 cal / g, 5%, 15.4%, and 71.4% The best ash content was found in sample B (1: 2: 2) of 4.8%. The results obtained of calorific value, moisture content, carbon content and volatile substances were found in A (1: 1: 1) sample biobriket of 4065, 69 cal / g, 5%, 15.4%, and 71.4% for the best ash content were found in sample B (1: 2: 2) of 4.8%. Keywords : Baglog waste, bio briquette, fossil fuel, oyster mushroom

Sign in / Sign up

Export Citation Format

Share Document