Assessment of the relationship between labial gingival thickness and the underlying bone thickness in maxillary anterior teeth by two digital techniques

This study aimed to noninvasively assess the relationship between the labial gingival thickness (GT) and the underlying bone thickness (BT) of maxillary anterior teeth by two digital techniques. A total of 30 periodontally healthy participants with 172 maxillary anterior teeth were enrolled. GT and BT were measured at 2, 4 and 6 mm apical to the cemento-enamel junction (CEJ) by two digital techniques: M1—cone-beam computed tomography (CBCT) and M2—digital intraoral scanning (DIS) combined with CBCT. The Pearson's correlation coefficient was calculated to determine the correlation between GT and BT. A significant negative correlation was identified between GT and BT at 2 mm apical to the CEJ for central incisors (CI), lateral incisors (LI), and canines (CA) both by M1 and M2, while a weak negative correlation at 4 mm apical to the CEJ was observed by M1 for CA. No significant correlation was found at other sites by both M1 and M2. The labial BT was < 1 mm in most cases (85% of CI; 97% of LI; and 90% of CA). Within the limitation of this study, it was concluded that GT and BT seemed to be negatively correlated at 2 mm apical to the CEJ. Therefore, caution is warranted when implant restoration at the esthetic area of the anterior teeth.

Antibacterial and Antioxidant Effects of Magnesium Alloy on Titanium Dental Implants

Objectives. In this study, a new type of dental implant by covering the surface of the titanium (Ti) implant with zinc-magnesium (Zn-Mg) alloy was designed, to study the antibacterial and antioxidant effects of Mg alloy on titanium (Ti) implants in oral implant restoration. Methods. Human gingival fibroblasts (HGFs), S. sanguinis, and F. nucleatum bacteria were used to detect the bioactivity and antibacterial properties of Mg alloy-coated Ti implants. In addition, B6/J mice implanted with different materials were used to further detect their antibacterial and antioxidant properties. Results. The results showed that Mg alloy could better promote the adhesion and proliferation and improve the alkaline phosphatase (ALP) activity of HGFs, which contributed to better improved stability of implant osseointegration. In addition, Mg alloy could better inhibit the proliferation of S. sanguinis, while no significant difference was found in the proliferation of F. nucleatum between the two implants. In the mouse model, the peripheral inflammatory reaction and oxidative stress of the Mg alloy implant were significantly lower than those of the Ti alloy implant. Conclusions. Zn-Mg alloy-coated Ti implants could better inhibit the growth of Gram-positive bacteria in the oral cavity, inhibit oxidative stress, and facilitate the proliferation activity of HGFs and the potential of osteoblast differentiation, thus, better increasing the stability of implant osseointegration.

Digital Versus Traditional Workflow for Immediate Loading in Single-Implant Restoration: A Randomized Clinical Trial

The purpose of this randomized controlled trial was to compare the immediate-loading protocol, in single restorations in the esthetic zone, by comparing the digital workflow in a test group (TG) vs. the analogical workflow in a control group (CG). A total of 50 patients were enrolled, requiring single hopeless tooth extraction. Twenty-five patients (TG) were randomly assigned to the immediate-loading protocol using the digital workflow, and twenty-five patients (CG) were assigned to the conventional workflow. Clinical and radiographic parameters were evaluated at the time of implant insertion (baseline) and after 3, 6 and 12 months, respectively. A clinician blind to conditions measured the Pink Esthetic Score (PES), as well as patient satisfaction. At 12-month follow-up, a cumulative survival rate of 100% was reported for all implants. No failures or biological complications were observed. No statistically significant differences were detected in the mean values of marginal bone loss and PES between the TG (0.12 ± 0.66 mm for MBL, 7.75 ± 0.89 for PES) and the CG (0.15 ± 0.54 mm for MBL, 7.50 ± 0.89 for PES). In 11 cases of TG, and 10 cases of CG, a one-year follow-up period showed an increased marginal bone level. No statistically significant differences were found in the mean total PES between test (7.75 ± 0.89) and control (7.5 ± 0.81) conditions. Furthermore, a customer satisfaction survey showed that patients preferred the digital workflow over the conventional workflow procedure (97.6 ± 4.3 vs. 69.2 ± 13.8). Digital workflow was more time-efficient than conventional workflow (97.2 ± 7.3 vs. 81.2 ± 11.3). Within the limitations of this study, no statistically significant differences were found between digital and traditional workflow.

Implant restoration of hypodontia resulting from ectodermal dysplasia: a case report

Background Ectodermal dysplasia is a congenital genetic disorder with a prevalence of 1:10,000 to 1:100,000. The clinical features of ectodermal dysplasia include sparse hair, missing teeth, and abnormal development of the skin, sweat glands, and other tissues and organs. Since 1985, dentists have used implants to correct tooth defects in patients with ectodermal dysplasia with reasonable success rates. However, there is still no widely accepted treatment for the oral defects caused by this disease. Case summary: This report describes a 19-year-old female patient with congenital ectodermal dysplasia, congenital absence of most of her teeth, and mandibular and maxillary dysplasia. The patient and her family were concerned about the patient’s growth and development, so she came to our hospital to restore her missing teeth. During several months of treatment, the patient underwent bone augmentation surgery for the maxilla and mandible, implant placement, a root repositioning flap, and free gingival grafting, which was completed in five stages. The patient completed the permanent implant restoration, and the desired results were achieved. Conclusion The patient’s mouth was restored through the use of bone augmentation and soft tissue grafting techniques, enabling appropriate function and appearance.

Hard and Soft Tissue Augmentation with Single-Implant Restoration in the Esthetic Zone

The removal of the central incisor of the upper jaw is a challenging process, since the restoration of a single implant in the esthetic zone is of great responsibility. When tooth extraction with immediate implant placement is not possible, modern protocols imply the use of the socket preservation technique. This method of preserving socket properties significantly reduces changes that occur during the healing process of the postextracted area and along with soft tissue augmentation allows to achieve a satisfying aesthetic result. The aim of present case report is to assess capabilities of socket preservation concept and application of soft tissue augmentation in the anterior maxillary region. The treatment steps of a 35-year-old woman who needed to remove tooth 11 with further dental implant placement are described. The clinical case is of interest because after socket preservation and soft tissue augmentation, an acceptable aesthetic result was not reached. However, additional soft tissue augmentation made it possible to achieve the desired result, which was stable for 7 years.

Bone augmentation with autologous tooth shell in the esthetic zone for dental implant restoration: a pilot study

Objectives To investigate the outcome and short-term follow-up of autogenous tooth shell (TS) grafting for bone augmentation in the esthetic zone, as well as stability and esthetics of implant-supported restoration. Materials and methods A total of 8 patients with 11 implants in 11 sites were enrolled in this study. All the horizontal and/or vertical bone defects in the esthetic zone were augmented by tooth shells, which were fixed laterally to the residual bone with osteosynthesis screws. The gap between the shell and residual bone was filled with Bio-Oss® granules. Four months after bone augmentation, dimensionally sufficient dental implants were inserted and implants-supported prostheses were made 3 months later. The esthetic outcome was evaluated by pink esthetic score (PES) and white esthetic score (WES) one year after prosthetic restoration. Horizontal ridge width (HRW) was assessed before and immediately after bone augmentation, as well as 4 and 19 months post-augmentation by radiography. The stability and absorption of TS grafts were evaluated at the 4th and 19th months post-augmentation. Results Though wound dehiscences occurred in 3 cases, secondary healings were obtained after TS modification and irrigation. The other 5 cases went through uneventful healing during the whole observation period. Radiographic examination showed that HRW was 8.01 ± 0.93 mm (median: 7.80, 95% CI 7.38, 8.64) 4 months after TS augmentation, which was statistically different compared to HRW (2.72 ± 1.73 mm) at the baseline. Mean HRW gain was 5.29 ± 2.03 mm (median: 4.60, 95% CI 3.92, 6.66). Three-dimensional bone volume in all the augmented sites was sufficient for dental implants insertion and prosthetic restoration. Follow-up of one year showed stable marginal bone around dental implants. The implant survival rate was 100%. HRW losses were 0.65 ± 0.43 mm (the 4th month) and 1.05 ± 0.54 mm (the 19th month) compared to HRW immediately after augmentation. The PES and WES of final prosthetic restorations were 8.09 ± 0.70 and 8.91 ± 0.54, respectively. Conclusions Autogenous tooth shell grafting is a reliable approach for bone augmentation in the esthetic zone for dental implant treatment, allowing for favorable stability and esthetic outcome of implant-supported prosthesis within the one-year follow-up period.

Influence of bone anatomical morphology of mandibular molars on dental implant based on CBCT

Background To apply CBCT to investigate the anatomical relationship between the mandibular molar and alveolar bone, aimed to provide clinical guidelines for the design of implant restoration. Methods 201 CBCT data were reevaluated to measure height of the alveolar process (EF), width of the alveolar process (GH), width of the basal bone (IJ), the angle between the long axis of the first molar and the alveolar bone (∠a) and the angle between the long axis of the alveolar bone and basal bone (∠b). The angle and width were measured to determine the implant-prosthodontic classification of the morphology in the left lower first molar (36) and right lower first molar (46). All measurements were performed on the improved cross-sectional images. Results EF, GH and IJ were measured as (10.83 ± 1.31) mm, (13.93 ± 2.00) mm and (12.68 ± 1.96) mm for 36, respectively; and (10.87 ± 1.24) mm, (13.86 ± 1.93) mm and (12.60 ± 1.90) mm for 46, respectively. No statistical significance was observed in EF, GH, IJ, ∠a and ∠b between 36 and 46 (all P > 0.05). The morphology was divided into three categories including the straight (68.7–69.2%), oblique (19.9–20.4%) and concave types (11%). Each type was consisted of two subcategories. Conclusions The proposed classification could provide evidence for appropriate selection and direction design of the mandibular molar implant in clinical. The concave type was the most difficult to implant with the highest risk of lingual perforation. The implant length, width, direction required more attention.