BIOCHEMICAL ANALYSIS OF FLOWERS OF Vinca major, A MEDICINAL WEED PLANT OF HILLY AREAS OF PAKISTAN

Vinca major L. is an evergreen perennial weed of family Apocynaceae, growing naturally in hilly areas of Hazara region of Khyber Pakhtunkhwa, Pakistan. Flowers of this weed were collected from Khanspur, Ayubia during June 2021, shade dried and extracted in pure methanol for two weeks. After filtration, the extract was analyzed by GC-MS for identification of possible bioactive compounds. α-Amyrin was the major compounds (32.49%) followed by lup-20(29)-en-3-ol, acetate, (3β)- (25.72%). Moderately abundant compounds included γ-sitosterol (8.78%), β-amyrone (7.25%), cyclohexane, 1,3,5-triphenyl- (7.01%), olean-12-en-3-ol, acetate, (3β)- (5.68%), and n-hexadecanoic acid (3.18%). Some of the identified compounds have various important biological properties including anti-inflammatory, antimicrobial, anticancer, antimalarial, antioxidant, antidiabetic, antitumor etc.

Biodiesel-Alkaline Transesterification Process for Methyl Ester Production

The world needs to increase renewable and alternative fuel sources such as Biomass, Bioethanol, and Biodiesel to compete with fossil fuels. Biodiesel is an important renewable fuel source since it can be used in regular diesel vehicles without requiring engine modifications. Conventional biodiesel production takes around 90 min of reaction time. A longer reaction time is not suitable for commercial production. Furthermore, traditional products such as oil react with biodiesel methoxide to produce a maximum of 90% biodiesel yield. As the catalyst is not involved with the reaction, pure methanol and methoxide (methanol with KOH catalyst) are separately added to the system to enhance the pre-reaction step. By changing the methanol to methoxide ratio, biodiesel is produced, and yield is calculated. The highest yield, which is 95%, is obtained with a 5:15% methanol to methoxide ratio. The total reaction time with the new experimental procedure is only 20 min. That is a significant reduction by saving operating costs such as energy consumption. Produced biodiesel show similar properties to that of standard biodiesel.

Application of Multivariate Optimization for Phenolic Compounds and Antioxidants Extraction from Moroccan Cannabis sativa Waste

A statistical simplex centroid design methodology was applied to determine the effects of different solvents and their mixtures on the yield, total polyphenol content, 2′2-dipheny-l-picrylhydrazyl (DPPH) radical scavenging activity, and ferric reducing antioxidant power (FRAP) of extracts from the waste of Cannabis sativa. The different extractor solvents (ethanol, methanol, water, and hexane) and their binary and ternary combinations were evaluated. The experimental results and their response surface models showed that the highest TPC yield values occur with the binary interaction between water and ethanol around the proportion of (ethanol, 70%; water, 30%). The desirability function showed that the optimal conditions were for TPC extraction ternary mixtures which consisted of 75% ethanol, 12.5% methanol, and 12.5% water. Ternary mixtures including water and binary mixture (ethanol 50% to 75%) yielded extracts with the best DPPH antioxidant activity, whereas pure methanol was the best solvent for extracting molecules with FRAP antioxidant capacity. The desirability function including all responses showed that the optimal solvent mixture consisted of 25% ethanol and 75% methanol.

Phytochemical and biological investigation of Indian medicinal plant of givotia rottlerifromis griff

A study on givotia rottlerifomis griff shows that studies on a tremendous of pharmacological and physiological activities and other applications. Moreover, givotia rottlerifomis griff has diverse physiological effects. This tempted us to use the bark of givotia rottlerifomis griff for extraction of new compound from the extract. Attempt is made to develop an efficient method for isolation of compounds from the barks of givotia rottlerifomis griff. Our scheme of work is to separate a portion by treatment with pure methanol (CH3OH) using soxhlet apparatus at boiling temperature and the sample is crystallized to separate to the pure compound. The compound was identified further by chromatographic studies, melting point determination, and spectral analysis (IR, 1D and 2D NMR) etc. Furthermore, antimicrobial studies are tested various antibacterial and antifungal species and also molecular docking studies are checked with HIV protease with Schrodinger 9.5 software.

Optimasi Biaya dalam Proses Pemurnian Metanol untuk Mengurangi Resin sebagai Limbah Bahan Berbahaya dan Beracun di PT Kaltim Methanol Industri

Purification process of raw methanol from its impurities to produce pure methanol at PT. Kaltim Methanol Industri (PT KMI) is carried out by several steps, including degassing, distillation, and adsorption. One of the impurities, tri methyl amine (TMA), could be removed by adding NaOH. Another method to remove TMA is conducted by adsorption process on ion exchange resin on the vessel called TMA catchpot. The TMA catchpot performance is very crucial in methanol purification process. Thus, monitoring and optimization are required to be performed regularly. Once the TMA catchpot resin has exhausted, the performance will be drop and methanol purification could not be done efficiently. Furthermore, the ion exchange resin should be replaced with new resin. This study evaluates the performance of the TMA catchpot during the charge of 2010, 2012, and 2016, calculates the NaOH consumption during operational time, and optimizes the cost. Resin regeneration option was introduced and compared with the conventional method (i.e. resin replacement). Economic evaluation shows that the lowest annual cost could be obtained by fresh resin replacement every 4 years and resin regeneration every 2 years. Resin regeneration option gives not only annual cost reduction, but also positive impact to the environment, by decreasing the amount of hazardous waste (i.e. spent resin) significantly.Keywords: ion exchange resin; methanol purification; regeneration; tri methyl amineA B S T R A KProses pemurnian metanol mentah (raw) dari pengotornya untuk menghasilkan metanol murni di PT. Kaltim Methanol Industri (PT KMI) dilakukan melalui beberapa tahapan antara lain degassing, distilasi dan adsorpsi. Salah satu zat pengotor adalah tri methyl amine (TMA) yang dapat dihilangkan dengan penambahan NaOH. Metode lain untuk menghilangkan TMA adalah dengan proses adsorpsi menggunakan resin penukar ion di dalam tangki yang disebut TMA catchpot. Performa TMA catchpot sangat penting dalam proses pemurnian metanol. Oleh karena itu, pemantauan dan optimalisasi perlu dilakukan secara berkala. Setelah resin pada TMA catchpot jenuh, performanya akan menurun dan pemurnian metanol tidak dapat dilakukan secara efisien. Selanjutnya, resin penukar ion harus diganti dengan resin baru. Artikel ini mengevaluasi kinerja catchpot TMA pada penggantian resin (charge) 2010, 2012 dan 2016, menghitung konsumsi NaOH sebagai fungsi waktu operasi, dan mengoptimasi biaya pemurnian. Selain itu, disimulasikan opsi regenerasi resin, sebagai pembanding metode konvensional (penggantian resin). Evaluasi ekonomi menunjukkan bahwa biaya tahunan paling rendah didapatkan dengan penggantian resin baru setiap 4 tahun, dan regenerasi resin setiap 2 tahun. Selain biaya tahunan yang rendah, regenerasi ini berdampak positif terhadap lingkungan dengan mengurangi timbulan limbah B3 (resin bekas) secara signifikan.Kata kunci: pemurnian metanol; regenerasi; resin penukar ion; tri metil amin

Possible neuropharmacological effects of Adenia trilobata (Roxb.) in the Swiss albino mice model

Background Known colloquially as akandaphal in Bangladesh, Adenia trilobata has some traditional uses. Its leaves and stems are extracted with pure methanol (MEATL, MEATS) and fractioned by n-hexane (NFATL, NFATS). The in vivo anxiolytic activity was evaluated by elevated plus maze (EPM) testing and hole-board test (HBT), whilst the locomotor activity was examined using the open-field test (OFT) and hole-cross test (HCT) and the antidepressant activity was assessed with the forced swimming test (FST) and the tail suspension test (TST). Results Regarding the anxiolytic activity, the 400-mg/kg doses of MEATL, NFATL, MEATS and NFATS exhibited maximum percentages of entry into the open arm of 33.85%, 32.23%, 30.06% and 41.84%, respectively, compare with the diazepam (69.33%). During HBT, MEATL (400 mg/kg) and NFATL (400 mg/kg) demonstrated 51.67 ± 0.88 and 57.67 ± 3.18 instances of head-dipping relative to diazepam (64.33 ± 3.16), whilst the locomotor activity showed a dose-dependent reduction in square movements and number of hole crossings. During FST and TST, the NFATL (400 mg/kg) exhibited rates of 43.32% and 57.71% time spent immobile, whilst fluoxetine experienced rates of 54.79% and 55.74%. Conclusion Adenia trilobata could be a potential component for the treatment of neuropharmacological defects. Further study is required.

Sephadex® LH-20, Isolation, and Purification of Flavonoids from Plant Species: A Comprehensive Review

Flavonoids are considered one of the most diverse phenolic compounds possessing several valuable health benefits. The present study aimed at gathering all correlated reports, in which Sephadex® LH-20 (SLH) has been utilized as the final step to isolate or purify of flavonoid derivatives among all plant families. Overall, 189 flavonoids have been documented, while the majority were identified from the Asteraceae, Moraceae, and Poaceae families. Application of SLH has led to isolate 79 flavonols, 63 flavones, and 18 flavanones. Homoisoflavanoids, and proanthocyanidins have only been isolated from the Asparagaceae and Lauraceae families, respectively, while the Asteraceae was the richest in flavones possessing 22 derivatives. Six flavones, four flavonols, three homoisoflavonoids, one flavanone, a flavanol, and an isoflavanol have been isolated as the new secondary metabolites. This technique has been able to isolate quercetin from 19 plant species, along with its 31 derivatives. Pure methanol and in combination with water, chloroform, and dichloromethane have generally been used as eluents. This comprehensive review provides significant information regarding to remarkably use of SLH in isolation and purification of flavonoids from all the plant families; thus, it might be considered an appreciable guideline for further phytochemical investigation of these compounds.