Mechanical properties of biofiber/glass reinforced hybrid composites produced by hand lay-up method: A review

Hybrid composites utilize more than one kind of strands within the same matrix to urge the synergistic impact of both fibers' properties on composites' general properties. Hybridization can be performed from artificial, natural, and a combination of both fibers. The constituent filaments can be altered in numerous ways, driving to the variety in composite properties. Partial substitution of glass fiber with natural ones offers an advantage compared with glass fiber composites while permitting to obtain a mechanical performance higher than using pure natural fiber composites. Recently, researchers are tending towards the development of hybrid composites which will provide good static properties. In this context, a concise review has been done on the recent developments of natural/glass fiber-reinforced composites made by hand lay-up method. It includes a survey of the past research already available involving the hybrid composites and the effect of various parameters on composites' performance studied by various researchers.

Carburization effect of Austenitic alloys with various Cr and Al additions under the methane/hydrogen atmosphere on the corrosion behaviors of steels

The corrosion behaviors of six Fe-19Ni-13/21Cr-xAl (x = 0, 2, 6 at. %) alloys in 10% CH4/H2 at 800oC were investigated. 2 at. % Al did not affect the corrosion resistance obviously, while 6 at. % Al reduced the carbon attack completely for Fe-19Ni-13Cr-6Al but was still insufficient to form protective alumina scales for alloys with 21 at. % Cr. An increase of Cr content changed the appearance of the internal carburization zone under the optical microscope. Stability diagrams of M-C-O system（M= Cr, Fe）were established to estimate the diffusion paths of carbon in the alloys.

Morphology and structure study of polygon ZnO nanorods: Biomedical applications

In this study, zinc oxide (ZnO) nanoparticles (NPs) were first synthesized using co-precipitation method in the presence of Zn(NO3)2.6H2O precursor and calcined at different temperature of 450 oC and 1000 oC. Samples were then characterized by x-ray diffraction (XRD), transmission electron microscopy (TEM), energy dispersive spectroscopy (EDS) and scanning electron microscopy (SEM). The XRD study revealed the hexagonal wurtzite structure for annealed samples. SEM images showed tthat he morphology of the ZnO NPs changed from sphere-like shape to polygon shape by increasing temperature. The exact size of NPs were measured by TEM analysis about 40 nm for as-prepared samples. The EDS analysis demonstrated an increasing level of Zn element from 28.5 wt% to 50.8 wt% for as-synthesized and annealed samples, respectively.

Benefits and problems of chrome tanning in leather processing: Approach a greener technology in leather industry

Tanning is the process of converting the raw skin and hides from different animals into a sustainable and manageable material called leather. Leather making is a very long process and consists of many different chemical and mechanical process steps. The most important step of the whole leather making process is the tanning step, which is performed commonly either by vegetable or mineral tanning. More than 85-90% of the leather making is performed by chrome tanning, which is the most common type of mineral tanning currently applied.

Structural, electrical, and magnetic characterization of (1-x) BaTiO3-x Ni0.6Zn0.4Fe2O4 multiferroic ceramic composites

In the present work, pure BaTiO3, pure Ni0.6Zn0.4Fe2O4 and (1-x)BaTiO3-xNi0.6Zn0.4Fe2O4 (where x = 0.15, 0.25 & 0.35) multiferroic composites were synthesized through solid-state sintering scheme. Structural, microstructural, ferroelectric, and ferromagnetic analysis was performed. Both tetragonal perovskite phase (for BaTiO3 ferroelectric phase) and cubic spinel ferrite phase (for Ni0.6Zn0.4Fe2O4 ferromagnetic phase) were simultaneously presented within each composite. The ferrite phase exhibited a smaller crystallite size compared to the ferroelectric phase. All of the composites demonstrated homogenous irregular-shaped grains. The measured average grain size for 0.85BaTiO3-0.15Ni0.6Zn0.4Fe2O4, 0.75BaTiO3-0.25Ni0.6Zn0.4Fe2O4, 0.65BaTiO3-0.35Ni0.6Zn0.4Fe2O4 were 364.14 nm, 378.46 nm and 351.62nm, whereas the density values were 3.04g/cm3, 3.20g/cm3 and 3.13 g/cm3 for x = 0.35, 0.25, 0.15 respectively. However, the heterogenous microstructure was observed for all of the compositions. The composites exhibited an oval-shaped lossy capacitor hysteresis loop. However, 0.75BaTiO3-0.25Ni0.6Zn0.4Fe2O4 composite showed the highest remnant polarization (11.613 μC/cm2) and coercive field value (1.526 kV/cm), ensuring its usability for switching applications. In addition, 0.75BaTiO3-0.25Ni0.6Zn0.4Fe2O4 also exhibited the maximum saturation (Ms= 1.732 emu/g) and remnant magnetization (Mr= 0.025 emu/g) among the composites. Nevertheless, all of the composites derived 'wasp-waisted' hysteresis loops due to the presence of either superparamagnetic (SPM) particles or a mixer of a single domain (SD) and superparamagnetic particles.

Study of α-Fe2O3@ ZnO nanoleaves: Morphological and optical study

In this paper, α-Fe2O4@ZnO nanoparticles (NPs) were synthesized by coprecipitation method in the presence of PVP and EG surfactants. The samples were charactrized by x-ray fluorescence (XRF), x-ray diffraction (XRD), scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM), and fourier transform infrared spectroscopy (FTIR). The XRD results exhibited rhombohedral α-Fe2O3 and wurtzite structure of ZnO. The SEM images showed that the NPs changed from rod-shape to nanoleaves particles after heat treatment. The TEM studies displayed the formation of Fe2O3@ZnO core-shell of as-synthesized NPs. The stretching vibrations peaks in FTIR in the wavenumber of 532 cm-1 and 473 cm-1 ascribed to the Fe and Zn groups. The XRF data indicated decreasing of the Fe weight percent from 22 %Wt. to 25 %Wt., after heat treatment.