Efficient Physical and Chemical Pretreatment of Lignocellulosic Biomass

2022 ◽  
pp. 123-139
Author(s):  
Liping Tan ◽  
Jian Zhao ◽  
Yinbo Qu
BioResources ◽  
2020 ◽  
Vol 16 (1) ◽  
pp. 1063-1075
Author(s):  
Abiodun A. Amusa ◽  
Abdul L. Ahmad ◽  
Jimoh K. Adewole

Lignocellulosic biomass was delignified by combining physical and chemical pretreatment techniques. Then, a polysulfone-polyethylene glycol blend, which was compatible with the lignin-free biomass (0 wt% to 3.0 wt%), was used to fabricate composite membranes. The presence of hydroxyl groups after the pretreatment was evaluated via Fourier transform infrared spectroscopy. The rheology of the polymer solutions was assessed via the viscometric method. Also, the hydrophobicity of the fabricated membranes was determined using contact angle and porosity measurements. The fabricated membranes with near superhydrophobic properties (a contact angle of approximately 140°) based on this study revealed that contactor systems and biomedical applications would benefit from this modification.


Author(s):  
Marcin Jędrzejczyk ◽  
Emilia Soszka ◽  
Martyna Czapnik ◽  
Agnieszka M. Ruppert ◽  
Jacek Grams

2017 ◽  
Vol 83 (22) ◽  
Author(s):  
Thitiporn Teeravivattanakit ◽  
Sirilak Baramee ◽  
Paripok Phitsuwan ◽  
Somphit Sornyotha ◽  
Rattiya Waeonukul ◽  
...  

ABSTRACT Complete utilization of carbohydrate fractions is one of the prerequisites for obtaining economically favorable lignocellulosic biomass conversion. This study shows that xylan in untreated rice straw was saccharified to xylose in one step without chemical pretreatment, yielding 58.2% of the theoretically maximum value by Paenibacillus curdlanolyticus B-6 PcAxy43A, a weak lignin-binding trifunctional xylanolytic enzyme, endoxylanase/β-xylosidase/arabinoxylan arabinofuranohydrolase. Moreover, xylose yield from untreated rice straw was enhanced to 78.9% by adding endoxylanases PcXyn10C and PcXyn11A from the same bacterium, resulting in improvement of cellulose accessibility to cellulolytic enzyme. After autoclaving the xylanolytic enzyme-treated rice straw, it was subjected to subsequent saccharification by a combination of the Clostridium thermocellum endoglucanase CtCel9R and Thermoanaerobacter brockii β-glucosidase TbCglT, yielding 88.5% of the maximum glucose yield, which was higher than the glucose yield obtained from ammonia-treated rice straw saccharification (59.6%). Moreover, this work presents a new environment-friendly xylanolytic enzyme pretreatment for beneficial hydrolysis of xylan in various agricultural residues, such as rice straw and corn hull. It not only could improve cellulose saccharification but also produced xylose, leading to an improvement of the overall fermentable sugar yields without chemical pretreatment. IMPORTANCE Ongoing research is focused on improving “green” pretreatment technologies in order to reduce energy demands and environmental impact and to develop an economically feasible biorefinery. The present study showed that PcAxy43A, a weak lignin-binding trifunctional xylanolytic enzyme, endoxylanase/β-xylosidase/arabinoxylan arabinofuranohydrolase from P. curdlanolyticus B-6, was capable of conversion of xylan in lignocellulosic biomass such as untreated rice straw to xylose in one step without chemical pretreatment. It demonstrates efficient synergism with endoxylanases PcXyn10C and PcXyn11A to depolymerize xylan in untreated rice straw and enhanced the xylose production and improved cellulose hydrolysis. Therefore, it can be considered an enzymatic pretreatment. Furthermore, the studies here show that glucose yield released from steam- and xylanolytic enzyme-treated rice straw by the combination of CtCel9R and TbCglT was higher than the glucose yield obtained from ammonia-treated rice straw saccharification. This work presents a novel environment-friendly xylanolytic enzyme pretreatment not only as a green pretreatment but also as an economically feasible biorefinery method.


2014 ◽  
Vol 36 ◽  
pp. 91-106 ◽  
Author(s):  
Shuvashish Behera ◽  
Richa Arora ◽  
N. Nandhagopal ◽  
Sachin Kumar

2014 ◽  
Vol 31 (1) ◽  
pp. 25-34 ◽  
Author(s):  
Yuzhi Kang ◽  
Matthew J. Realff ◽  
Minjeong Sohn ◽  
Jay H. Lee ◽  
Andreas S. Bommarius

Polymers ◽  
2021 ◽  
Vol 13 (17) ◽  
pp. 2971
Author(s):  
Mohd Nor Faiz Norrrahim ◽  
Muhammad Roslim Muhammad Huzaifah ◽  
Mohammed Abdillah Ahmad Farid ◽  
Siti Shazra Shazleen ◽  
Muhammad Syukri Mohamad Misenan ◽  
...  

The utilization of lignocellulosic biomass in various applications has a promising potential as advanced technology progresses due to its renowned advantages as cheap and abundant feedstock. The main drawback in the utilization of this type of biomass is the essential requirement for the pretreatment process. The most common pretreatment process applied is chemical pretreatment. However, it is a non-eco-friendly process. Therefore, this review aims to bring into light several greener pretreatment processes as an alternative approach for the current chemical pretreatment. The main processes for each physical and biological pretreatment process are reviewed and highlighted. Additionally, recent advances in the effect of different non-chemical pretreatment approaches for the natural fibres are also critically discussed with a focus on bioproducts conversion.


2020 ◽  
Vol 54 (7-8) ◽  
pp. 699-704
Author(s):  
JANAÍNA ALVES CARVALHO ◽  
◽  
MATHEUS FELIPE FREIRE PEGO ◽  
PAULO RICARDO GHERARDI HEIN ◽  
WILLIAN MIGUEL DA SILVA BORGES ◽  
...  

Author(s):  
Mohd Nor Faiz Norrrahim ◽  
Rushdan Ahmad Ilyas ◽  
Norizan Mohd Nurazzi ◽  
Mohd Saiful Asmal Rani ◽  
Mahamud Siti Nur Atikah ◽  
...  

Lignocellulosic biomass has attracted great interest from researchers. It was due to the abundance of this valuable material which can be converted into value-added materials such as nanocellulose, biocomposites, bioelectricity, biohydrogen and biosugars. Lignocellulosic biomass is consisting of the three major components which are cellulose, hemicellulose and lignin. In order to utilize lignocellulosic biomass for bioproducts manufacturing, they need to be pretreated prior to further processing. Pretreatment can be carried out either by mechanical, chemical, biological or combination of all these methods. Chemical pretreatment are the common method used to pretreat the lignocellulosic biomass in order to completely or partially remove the components. During the past few years, a large number of chemical pretreatment including lime, acid, steam explosion, sulfur dioxide explosion, ammonia fiber explosion, ionic liquid and others have been discovered for efficient pretreatment of biomass. Several types of chemical pretreatment of fibers and their future direction and also challenges were tackled in this review. This review could be beneficial for future directions in the pretreatment of fiber for the development of several products.


Sign in / Sign up

Export Citation Format

Share Document