Abstract
Fingerprints, a butterfly’s wings, or a lotus leaf: when it comes to surfaces, there is no such thing as coincidence in animated nature. Based on their surfaces, animals and plants control their wettability, their swimming resistance, their appearance, and much more. Evolution has optimized these surfaces and developed a microstructure that fits every need. It is all the more astonishing that, with regard to technical surfaces, man confines himself to random roughnesses or “smooth” surfaces. It is surely not a problem of a lack of incentives: structured surfaces have already provided evidence of optimizing friction and wear [1, 2, 3, 4], improving electrical contacts [5, 6], making implants biocompatible [7, 8], keeping away harmful bacteria [9], and much more. How come we continue counting on grinding, polishing, sandblasting, or etching? As so often, the problem can be found in economic cost effectiveness. It is possible to produce interesting structures such as those of the feather in Fig. 1. However, generating fine structures in the micro and nanometer range usually requires precise processing techniques. This is complex, time-consuming, and cannot readily be integrated into a manufacturing process. Things are different with Direct Laser Interference Patterning, DLIP) [10, 11]. This method makes use of the strong interference pattern of overlapped laser beams as a “stamp” to provide an entire surface area with dots, lines, or other patterns – in one shot. It thus saves time, allows for patterning speeds of up to 1 m2/min and does it without an elaborate pre- or post-treatment [10, 12]. The following article intends to outline how the method works, which structures can be generated, and how the complex multi-scale structures that nature developed over millions of years can be replicated in only one step.
Direct Laser Interference Patterning of Diffraction Gratings in Safrofilcon-A Hydrogel: Fabrication and Hydration Assessment