Study of the degree of crystallinity in eudragit/poly(methyl methacrylate) polyblends by X-ray diffraction

2005 ◽  
Vol 96 (5) ◽  
pp. 1835-1838 ◽  
Author(s):  
M. Ramrakhiani ◽  
P. Parashar ◽  
S. C. Datt
Keyword(s):  
Methyl Methacrylate ◽  
Degree Of Crystallinity ◽  
X Ray Diffraction ◽  
X Ray ◽  
Poly Methyl Methacrylate ◽  
The Degree Of Crystallinity

Properties of Carbon Nanofibers Prepared from Polyacrylonitrile/Poly(methyl Methacrylate) Blend

2009 ◽  
Vol 79-82 ◽  
pp. 353-356
Author(s):  
Wei Pan ◽  
Yan Chen ◽  
Xiao Wei He
Keyword(s):  
Methyl Methacrylate ◽  
Carbon Nanofibers ◽  
Carbon Fibers ◽  
Nitrogen Atmosphere ◽  
Wet Spinning ◽  
X Ray Diffraction ◽  
X Ray ◽  
Poly Methyl Methacrylate ◽  
Graphite Crystallite ◽  
Raman Microspectrometry

The polyacrylonitrile(PAN)/poly (methyl methacrylate)(PMMA) blend fibers were prepared by wet-spinning technique and carbonized over the temperature range of 400-1000°C in nitrogen atmosphere. After carbonization of the blend fibers, the PMMA component removed and the PAN component left in the form of carbon nanofibers. Morphology of the carbon nanofibers were investigated via scanning electron microscopy (SEM), and the carbonization behavior of the fibers were examined via x-ray diffraction (XRD), Raman microspectrometry. The optimal condition made carbon fibers with great L/D ratio and diameter less than 200 nm. XRD and Raman spectra shows that the PAN/PMMA blend fibers treated at 600°C produced some graphite crystallite.

scholarly journals Hemp Fibre Reinforced Poly(Lactic Acid) Composites

2007 ◽  
Vol 29-30 ◽  
pp. 337-340 ◽  
Author(s):  
M.A. Sawpan ◽  
K.L. Pickering ◽  
Alan Fernyhough
Keyword(s):  
Lactic Acid ◽  
Degree Of Crystallinity ◽  
Poly Lactic Acid ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Hemp Fibre ◽  
Reinforcing Material ◽  
Fibre Loading ◽  
The Degree Of Crystallinity

The potential of hemp fibre as a reinforcing material for Poly(lactic acid) (PLA) was investigated. Good interaction between hemp fibre and PLA resulted in increases of 100% for Young’s modulus and 30% for tensile strength of composites containing 30 wt% fibre. Different predictive ‘rule of mixtures’ models (e.g. Parallel, Series and Hirsch) were assessed regarding the dependence of tensile properties on fibre loading. Limited agreement with models was observed. Differential scanning calorimetry (DSC) and x-ray diffraction (XRD) studies showed that hemp fibre increased the degree of crystallinity in PLA composites.

Study of the structure and thermal characteristics of nanocomposites based on polyvinyl alcohol and intercalated montmorillonite

2019 ◽  
pp. 089270571987919
Author(s):  
Volodymyr Krasinskyi ◽  
Ivan Gajdos ◽  
Oleh Suberlyak ◽  
Viktoria Antoniuk ◽  
Tomasz Jachowicz
Keyword(s):  
Thermal Stability ◽  
Differential Scanning Calorimetry ◽  
Acrylic Acid ◽  
Polyvinyl Alcohol ◽  
Thermal Characteristics ◽  
Degree Of Crystallinity ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
The Degree Of Crystallinity

The structure and thermal characteristics of nanocomposites based on polyvinyl alcohol (PVA) and montmorillonite (MMT) intercalated with polyvinylpyrrolidone were investigated by X-ray diffraction analysis and differential scanning calorimetry. The modification of PVA with intercalated MMT reduces the degree of crystallinity of the resulting nanocomposites but significantly increases their thermal stability. Under ultrasound, the intercalated MMT was completely distributed in a PVA solution and formed a monocrystalline structure. Films based on PVA with modified MMT were cross-linked at 110°C in the presence of 5 wt% acrylic acid and 0.5 wt% Ferrous(II) sulfate as an initiator. The formed films have a homogeneous cross-linked structure.

scholarly journals Determination of the Degree of Crystallinity of Poly(2-methyl-2-oxazoline)

Polymers ◽  
2021 ◽  
Vol 13 (24) ◽  
pp. 4356
Author(s):  
Evgeniy M. Chistyakov ◽  
Sergey N. Filatov ◽  
Elena A. Sulyanova ◽  
Vladimir V. Volkov
Keyword(s):  
Thermal Destruction ◽  
Polymer Melt ◽  
Boron Trifluoride Etherate ◽  
Degree Of Crystallinity ◽  
X Ray Diffraction ◽  
X Ray ◽  
X Ray Scattering ◽  
Cationic Ring Opening Polymerization ◽  
The Degree Of Crystallinity

A new method for purification of 2-methyl-2-oxazoline using citric acid was developed and living cationic ring-opening polymerization of 2-methyl-2-oxazoline was carried out. Polymerization was conducted in acetonitrile using benzyl chloride—boron trifluoride etherate initiating system. According to DSC data, the temperature range of melting of the crystalline phase of the resulting polymer was 95–180 °C. According to small-angle X-ray scattering and wide-angle X-ray diffraction data, the degree of crystallinity of the polymer was 12%. Upon cooling of the polymer melt, the polymer became amorphous. Using thermogravimetric analysis, it was found that the thermal destruction of poly(2-methyl-2-oxazoline) started above 209 °C.

scholarly journals Microwave-Assisted Preparation of Zinc-Doped β-Tricalcium Phosphate for Orthopedic Applications

2020 ◽  
Author(s):  
Ali Taha Saleh ◽  
Dheyaa Alameri
Keyword(s):  
Tricalcium Phosphate ◽  
Degree Of Crystallinity ◽  
X Ray Diffraction ◽  
X Ray ◽  
Microwave Assisted ◽  
Ftir Spectrometer ◽  
Diffraction Peaks ◽  
Orthopedic Applications ◽  
The Degree Of Crystallinity ◽  
Good Agreement

A novel two-step methodology delivering zinc into the structure of β-tricalcium phosphate (β-TCP) has been investigated. Incorporating wet precipitation of calcium-deficient apatite [Ca9-xZnx(HPO4)(PO4)5(OH)] (x = 0.00–1.00 mol) using a microwave-assisted process followed by two-hour calcination at 1000 °C has been conducted to generate a ratio of 1.48 of Zn doped β-TCP. The products were characterized by X-ray diffraction (XRD), Fourier-transform infrared (FTIR) spectrometer, and field emission scanning electron microscope (FESEM). Our results confirmed that the product was crystalline Zn2+-doped β-tricalcium phosphate. The incorporation of Zn+2 into the β-TCP lattice resulted in a shifting of diffraction peaks to higher 2θ values, which were attributed to the substitution of larger-sized Ca+2 ions with smaller-sized Zn2+ ions. A reduction in the intensity of the XRD peaks was also observed due to the reduction in the degree of crystallinity of the samples. Lattice parameters along the a and c-axis showed a gradual decrease in length with an increase in the amount of Zn2+ doping. This decrease was attributed to the replacement of Ca+2 ion by the smaller-sized Zn2+ ions. The microstructure of the powders consisted of microscale aggregates fused together. EDX analysis of all samples showed that the Zn2+ doping had successfully taken place and the amount of Zn2+ present in the samples was in good agreement with the theoretical values.

scholarly journals Preparation and Characterization of Zinc Oxide (Zno)/Polymethyl Methacrylate (PMMA) Nanocomposites

2021 ◽  
Vol 04 (04) ◽  
Author(s):  
Jayashree Bagawade ◽  
Keyword(s):  
Zinc Oxide ◽  
Methyl Methacrylate ◽  
Zinc Oxide Nanoparticles ◽  
Nanocomposite Films ◽  
Oxide Nanoparticles ◽  
X Ray Diffraction ◽  
X Ray ◽  
Poly Methyl Methacrylate ◽  
Absorption Measurements

A series of novel zinc oxide / Poly (methyl methacrylate) nanocomposite films with different ZnO contents were prepared through inclusion of pre-synthesized zinc oxide nanoparticles. The physical composition and morphology of the as-prepared nanocomposites were studied by XRD and TEM. The TEM analyses revealed that the zinc oxide nanoparticles have a particle size of ~3–5 nm. X-ray diffraction proved the presence of the amorphous PMMA in the nanocomposites. The intermolecular interactions within the polymer nanocomposites were explored by FTIR and XRD. FTIR spectra confirmed the dispersion of the zinc oxide nanoparticles in the Poly (methyl methacrylate) i.e. PMMA matrices. The UV-Vis absorption measurements of the ZnO/PMMA nanocomposites proved their potential optical properties.

Physicochemical Properties of Porous Starches from Different Botanical Origin

2010 ◽  
Vol 159 ◽  
pp. 363-370
Author(s):  
Hua Xi Xiao ◽  
Qin Lu Lin ◽  
Yue Wu ◽  
Wei Tian ◽  
Wei Wu
Keyword(s):  
Potato Starch ◽  
Enzyme Hydrolysis ◽  
Degree Of Crystallinity ◽  
Rice Starch ◽  
Adsorptive Capacity ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Potato Starches ◽  
The Degree Of Crystallinity

Rice, maize and potato starches were hydrolyzed by amylase to obtain porous starches as final product. The adsorptive capacity, desorbed rates, degree of crystallinity and retrogradation properties of native and porous starches were investigated. The results showed that porous starches had the stronger adsorptive capacity and slower desorbed rate compared with native starches. In the three starch materials, the adsorptive capacity of rice starch for liquids was the strongest; the adsorptive capacity of potato starch for liquids was the weakest. the more flavors adsorbed, the more flavors desorbed. X-ray diffraction showed that Enzyme hydrolysis did not result in any significant changes in the degree of crystallinity of starch. The porous starches exhibited lower tendency of retrogradation as assessed by differential scanning calorimetry (DSC).

Poly(Ethylene Oxide)/Styrene Ionomers Blends: Crystallization of Poly (Ethylene Oxide) Component Studied by Wide-Angle X-Ray Diffraction

2007 ◽  
Vol 130 ◽  
pp. 251-256 ◽  
Author(s):  
Czesław Ślusarczyk ◽  
Kazimiera Suchocka-Gałaś
Keyword(s):  
Ethylene Oxide ◽  
Degree Of Crystallinity ◽  
Wide Angle ◽  
X Ray Diffraction ◽  
X Ray ◽  
Oxide Component ◽  
Ionic Groups ◽  
Poly Ethylene Oxide ◽  
Poly Ethylene ◽  
The Degree Of Crystallinity

Wide-angle X-ray diffraction (WAXD) and the scanning electron microscopy (SEM) were used to determine the morphology of crystalline phase of blends of poly(ethylene-oxide) (PEO) and styrene-acrylic acid (S-AA) copolymers neutralized with sodium ions (Na+). In this study, we investigated the effects of blend composition and the content of ionic groups in amorphous ionomers on the degree of crystallinity and the crystallite sizes. It was found that the degree of crystallinity of PEO in the blends decreases both with increasing S-ANa(6.4) content and with increasing ANa content. The sizes of PEO crystallites, measured both in the direction perpendicular and parallel to the polymer axis, are almost independent of ionic groups content in the amorphous component of the blends but they decrease with increasing S-ANa(6.4) content. For the blends containing small amounts of PEO the confined crystallization of this polymer were observed. The final crystalline morphology of these blends, observed by SEM method, is different in comparison to that formed without spatial confinement.

Digital Filtering and Shape Identification in the Analysis of WAXD Patterns of Semicrystalline Polymers

2013 ◽  
Vol 203-204 ◽  
pp. 189-192 ◽  
Author(s):  
Małgorzata Rabiej
Keyword(s):  
Numerical Differentiation ◽  
Degree Of Crystallinity ◽  
X Ray Diffraction ◽  
Amorphous Halo ◽  
Shape Identification ◽  
Diffraction Curve ◽  
X Ray ◽  
The Degree Of Crystallinity ◽  
Quick Determination

Most frequently, the degree of crystallinity of polymers is determined using Wide Angle X-ray Diffraction (WAXD) technique. The method consists in the resolution of WAXD diffraction curve of a polymer into individual crystalline peaks and amorphous halo. This work presents a procedure, which was elaborated to help in a quick determination of the angular positions of crystalline peaks present in the diffraction curve of investigated polymer. The positions of peaks are determined using numerical differentiation. Using these data the computer program WAXSFIT identifies investigated polymer and prepares a set of starting parameters which are used in the calculations of the degree of crystallinity.

Sign in / Sign up

Export Citation Format

Share Document