Synthesis and evaluation of high‐temperature properties of butylated graphene oxide composite incorporated SBS (C 4 H 9 ‐GO/SBS)‐modified asphalt

2019 ◽  
Vol 136 (46) ◽  
pp. 48231 ◽  
Author(s):  
Shaochan Duan ◽  
Jing Li ◽  
Yaseen Muhammad ◽  
Zhibin Su ◽  
Fei Meng ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
High Temperature ◽  
High Temperature Properties ◽  
Modified Asphalt ◽  
Oxide Composite ◽  
Sbs Modified Asphalt

scholarly journals Research on the Properties of Low Temperature and Anti-UV of Asphalt with Nano-ZnO/Nano-TiO2/Copolymer SBS Composite Modified in High-Altitude Areas

2020 ◽  
Vol 2020 ◽  
pp. 1-15 ◽  
Author(s):  
Xiangbing Xie ◽  
Tao Hui ◽  
Yaofei Luo ◽  
Han Li ◽  
Guanghui Li ◽  
...  
Keyword(s):  
Surface Modification ◽  
High Temperature ◽  
Low Temperature ◽  
Orthogonal Test ◽  
Nano Zno ◽  
Carbonyl Index ◽  
Modified Asphalt ◽  
Temperature Performance ◽  
Before And After ◽  
Sbs Modified Asphalt

Strong ultraviolet light and low-temperature are the typical environmental characteristics in high-altitude areas. The performance of SBS-modified asphalt in the above environmental characteristics needs further study. To improve the resistance ultraviolet (UV) ageing and low-temperature performance of copolymer- (SBS-) modified asphalt, an SBS-modified asphalt containing nano-ZnO and nano-TiO2 is proposed. In this paper, nano-ZnO, nano-TiO2, and SBS were used as modifiers with the silane coupling agent (KH-560) as the nanomaterial surface modification. The orthogonal test table was used to analyse the effects of the three modifiers on the physical properties of modified asphalt at different dosages. On this basis, the physical properties, low-temperature properties, and ageing indices (carbonyl index and sulfoxide index) were studied for base asphalt, SBS-modified asphalt, nano-ZnO/SBS-modified asphalt, and nano-ZnO/nano-TiO2/SBS composite-modified asphalt before and after photoaging. The content changes of characteristic elements (Zn and Ti) in the nano-ZnO/nano-TiO2/SBS composite-modified asphalt before and after ageing were studied by scanning electron microscopy with energy dispersive spectroscopy (SEM/EDS), and the UV ageing mechanism was revealed. The results indicate that two nanoparticles show the best compatibility with asphalt after surface modification and can improve the binding ability between SBS and base asphalt. The orthogonal test analysis shows that nano-ZnO has a highly significant effect on the low- and high-temperature performance of the nano-ZnO/nano-TiO2/SBS composite-modified asphalt, and nano-TiO2 has a significant effect on the high-temperature performance. Three optimal composite-modified systems for base asphalt including 4% nano-ZnO/1.5% nano-TiO2/3.2% SBS were proposed and had the best antiaging ability. Compared with the sulfoxide index, the carbonyl index changed most obviously before and after ageing. Additionally, the results reveal that nano-TiO2 has a good absorption effect at a wavelength of 365 nm (ultraviolet light), while nano-ZnO is liable to photolysis, and its activity decreases at this wavelength.

Influence of Modifier Dosage and Aging Time on the SBS Modified Asphalt

2014 ◽  
Vol 505-506 ◽  
pp. 260-264
Author(s):  
Bai Lin Wang ◽  
Min Nan Zheng ◽  
Jie Zhang ◽  
Jiu Guang Geng
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Aging Time ◽  
Asphalt Pavement ◽  
High Grade ◽  
Modified Asphalt ◽  
Index Analysis ◽  
Pavement Engineering ◽  
Sbs Modified Asphalt ◽  
Physical Index

SBS modified asphalt has good performance of high temperature and low temperature, it is widely used in high-grade asphalt pavement engineering. But the aging will influence the using performance of asphalt, we select four dosages of modifier and aging for different time, Experimental results show that with the increase of aging time, asphalt penetration is reduced, softening point is elevated, ductility is decreased. According to the macro physical index analysis, find that SBS modified asphalt’s anti-aging performance is improved.

The Rejuvenating and Aging Performances of Aged SBS Modified Asphalt Treated by Different Rejuvenator Sealer Materials

2013 ◽  
Vol 753-755 ◽  
pp. 734-740 ◽  
Author(s):  
Li Wan ◽  
Shao Peng Wu ◽  
Min Lei ◽  
Kim Jenkins
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Economic Benefits ◽  
Modified Asphalt ◽  
Temperature Performance ◽  
Low Performance ◽  
Aged Binder ◽  
Styrene Butadiene ◽  
Sbs Modified Asphalt ◽  
Butadiene Styrene

Currently, rejuvenator seal which is one of the preventive maintenance methods is more widely used due to its economic benefits and convenience. This paper described the chemical and rheological evaluation of the aged styrene butadiene styrene modified asphalt (ASMA) treated by two rejuvenator sealer materials (RSMs). First the ASMA was rejuvenated by mixing with the RSMs. Then the ASMA and two rejuvenated binders were re-aged by 10h PAV test. At last, the new binder, ASMA, rejuvenated ASMAs, re-aged binders were tested by Dynamic shear rheometer (DSR) and Fourier Transform Infrared Spectroscopy (FTIR). The results showed that the first aging of the new binder had a significant decrease of the low temperature performance and slight improvement of the high temperature performance. In addition, the high temperature performance increased obviously after 10h PAV test. Two RSMs could significantly soften the aged binder due to increase of maltene content existing in the RSMs, and the rejuvenated binder exhibited a better low performance after the 10h PAV test. However they cannot restore the low temperature completely because that RSMs cannot remedy the degradation of SBS modifier and remove the carbonyl produced in the aging progress.

The Current Using Situation of SBS Modified Asphalt in China and a New Method of Monitoring SBS Modifier Dosage

2013 ◽  
Vol 706-708 ◽  
pp. 575-578
Author(s):  
Jia Le Song ◽  
Chang Yong Ye ◽  
Bai Lin Wang ◽  
Zhi Mi Zhou ◽  
Yan Xiao ◽  
...  
Keyword(s):  
Molecular Weight ◽  
High Temperature ◽  
Research Group ◽  
Detection Method ◽  
Microscopic Analysis ◽  
Construction Site ◽  
Modified Asphalt ◽  
Sbs Modified Asphalt ◽  
The Relationship ◽  
Fluorescence Microscopic Analysis

The relationship between the SBS modifier types and asphalt components on the effect of modified asphalt properties was discussed in this paper. Higher block ratio, higher molecular weight and star-like structure of SBS can improve modified asphalt high temperature properties. Colloid content decrease leading the processing easier, result stability decline. Our research group invented a chemical titration combined with fluorescence microscopic analysis detection method monitoring SBS modifier dosage. This method applied in highway construction site, the effect is significant.

Application on Fiber-Enhanced Asphalt Mixture in Surface Layer of Large Longitudinal Slope Pavement of Xi-Sang Highway

2014 ◽  
Vol 599 ◽  
pp. 282-286 ◽  
Author(s):  
Chun Gang Zhang ◽  
Yan Jun Xie ◽  
Lin Chun Meng ◽  
Qin Yong Li
Keyword(s):  
Surface Layer ◽  
High Temperature ◽  
Low Temperature ◽  
Dynamic Modulus ◽  
Asphalt Mixture ◽  
Modified Asphalt ◽  
Longitudinal Slope ◽  
Sbs Modified Asphalt ◽  
Test Result ◽  
Temperature Dynamic

This paper investigated into the application of fiber-enhanced asphalt mixture in surface layer of the large longitudinal slope pavement of Xi-Sang Highway. Asphalt mixture with and without polyester fiber were used. Focus is on resistance of deformation at high temperature and flexibility at low temperature. Fiber-enhanced asphalt mixture with dynamic stability above 7000 passes/mm indicated excellent rutting resistance. The high temperature dynamic modulus of fiber-enhanced asphalt mixture was much higher than conventional SBS modified asphalt mixture. Three-point blending test result indicated that the maximum flexural strain of fiber-enhance asphalt mixture reached 4180μm/m. It was concluded that fiber-enhanced asphalt mixture was suit to be used in surface layer of the large longitudinal slope pavement of Xi-Sang Highway.

scholarly journals High Temperature Performance of SBS and LM-S Modified Asphalt Mixtures by Triaxial Test

2021 ◽  
Vol 293 ◽  
pp. 02029
Author(s):  
Tang-Baoli ◽  
Ren-yongqiang ◽  
Chen-Xiangmei ◽  
Hou-Huifang ◽  
Liang-Jianping
Keyword(s):  
High Temperature ◽  
Creep Rate ◽  
Permanent Deformation ◽  
Asphalt Mixture ◽  
Deviatoric Stress ◽  
Repeated Loading ◽  
Flow Number ◽  
Modified Asphalt ◽  
Temperature Performance ◽  
Sbs Modified Asphalt

In order to study the high temperature performance of LM-S modified asphalt mixture and SBS modified asphalt mixture, repeated loading creep test was used to study the influence of temperature and deviatoric stress on the axial permanent deformation of the two kinds of asphalt mixture. At the same time, Permanent deformation, ε@5000, flow number FN and creep rate were select to evaluation of high temperature performance from different directions. The results show that the ε@5000 and creep rate are failed in the condition of high temperature and large deviatoric stress, so it hast widely practicable. The flow number FN is also limited by the conditions, which leads to the distortion of the flow number at lower temperature and smaller deviatoric stress so it is not easy to direct used as the evaluation index. Axial permanent deformation can reflect the permanent deformation in different cycles which is an excellent index to evaluate the high temperature performance of the two kinds of asphalt mixture, it is recommended to use axial permanent deformation to compare the LM-S modified asphalt mixture and SBS modified asphalt mixture The experimental results show that the axial permanent deformation of the LM-S modified asphalt mixture is always less than that of SBS modified asphalt mixture,it indicating that the high temperature rutting resistance of the LM-S modified asphalt mixture is better than that of SBS modified asphalt mixture.

scholarly journals Mechanism and Rheological Properties of High-Modulus Asphalt

2020 ◽  
Vol 2020 ◽  
pp. 1-13
Author(s):  
Xinquan Xu ◽  
Guilin Lu ◽  
Jun Yang ◽  
Xinhai Liu
Keyword(s):  
High Temperature ◽  
Fluorescence Microscopy ◽  
Infrared Spectrum ◽  
Dynamic Modulus ◽  
Viscoelastic Properties ◽  
Asphalt Mixture ◽  
Superior Performance ◽  
High Modulus ◽  
Modified Asphalt ◽  
Sbs Modified Asphalt

High-modulus asphalt concrete (HMAC) is considered as an effective paving material for addressing the increasing heavy traffic and rutting problems. Therefore, one high-modulus agent was used in this study to prepare high-modulus asphalt binder with different dosages. The objective of this study is to investigate the performance and modification mechanism of high-modulus asphalt. The effects of high-modulus agent on the viscoelastic properties of asphalt with different dosages were quantified via rheological tests as compared to base binder and styrene-butadiene-styrene- (SBS-) modified asphalt. Moreover, the modification mechanism of the high-modulus agent was examined using fluorescence microscopy and infrared spectrum test. Based on rutting and dynamic modulus tests, the differences of road performances between high-modulus modified asphalt mixture and SBS-modified asphalt mixture were compared. The results demonstrate that the high-modulus agent improves the high-temperature performance and viscoelastic properties of the matrix asphalt. When the dosage increases to 6.67%, the modification effect is better than that of the SBS-modified asphalt. Furthermore, the results of the rutting test show that the high-modulus modified asphalt mixture has better resistance to deformation than the SBS-modified asphalt mixture. The dynamic modulus test further demonstrates that the high-modulus modified asphalt mixture exhibits superior performance in high-temperature range. Fluorescence microscopy shows that the high-modulus agent particles can swell in the asphalt to form polymer links that improve the viscoelastic properties of the asphalt. Based on the results of the infrared spectrum test, it can be concluded that a high-modulus agent changes the asphalt matrix via physical blending modification.

Research on the Paving Performance of Montmorillonite/SBS Modified Asphalt Mixtures

2012 ◽  
Vol 204-208 ◽  
pp. 4143-4146
Author(s):  
Zhong Guo He ◽  
Xin De Tang ◽  
Wen Jun Yin ◽  
Yi Fan Sun ◽  
Zhong Bo Liu
Keyword(s):  
High Temperature ◽  
Physical Properties ◽  
Asphalt Mixture ◽  
Temperature Stability ◽  
Asphalt Mixtures ◽  
High Temperature Stability ◽  
Moisture Susceptibility ◽  
Modified Asphalt ◽  
Sbs Modified Asphalt ◽  
Enhanced Stability

Montmorillonite/SBS composite modifed asphalts were prepared by mixing montmorillonite with SBS-modified asphalt, further the corresponding asphalt mixtures were obtained. The paving technical indexes of the mixture such as physical properties, moisture suscepyibility, and high temperature stability were tested, and compared with that of the corresponding SBS-modifed asphalt mixture and base asphalt mixture. The results demonstrate that the montmorillonite/SBS composite modifed asphalt mixture exhibites enhanced stability, improved flow value and moisture susceptibility, and increased high temperature stability.

Sign in / Sign up

Export Citation Format

Share Document