Multi–scale observation of oxidative aging on the enhancement of high–temperature property of SBS–modified asphalt

2021 ◽  
Vol 313 ◽  
pp. 125478
Author(s):  
Caihua Yu ◽  
Kui Hu ◽  
Qilin Yang ◽  
Yujing Chen
Keyword(s):  
High Temperature ◽  
Temperature Property ◽  
Oxidative Aging ◽  
Modified Asphalt ◽  
Multi Scale ◽  
High Temperature Property ◽  
Sbs Modified Asphalt

Revised Penetration Method Based on Evaluate High Temperature Property of SBS Modified Asphalt

2017 ◽  
Vol 902 ◽  
pp. 3-8
Author(s):  
Sen Han ◽  
Pei Sun ◽  
Ya Min Liu ◽  
Wei Li
Keyword(s):  
High Temperature ◽  
Asphalt Mixture ◽  
Temperature Property ◽  
Modified Asphalt ◽  
Specification Method ◽  
Different Temperatures ◽  
High Temperature Property ◽  
The Difference ◽  
Sbs Modified Asphalt ◽  
Temperature Susceptibility

In order to achieve the penetration method which could reflect the high temperature property of SBS modified asphalt, the paper presented the penetration test of SBS modified asphalt with different types and dosages of SBS modifier at three kinds of penetration weight and four different temperatures. Meanwhile, the high temperature performance of the SBS modified asphalt mixture was studied. It was found that penetration measured under current specification method (25oC, 100g, 5s) could not identify the difference of viscosity and high temperature property of different SBS modified asphalt. When the test conditions are revised to “penetration weight of 150 g, test temperature of 30oC, penetration time of 5s”, the penetration of different SBS modified asphalt measured by revised method could be used to evaluate the temperature susceptibility of SBS modified asphalt accurately and are closely related to the dynamic stability of mixture.

scholarly journals High-Temperature Property Evaluation and Index Research of Modified Asphalt before and After Aging

2022 ◽  
Vol 2152 (1) ◽  
pp. 012032
Author(s):  
Wen Wang ◽  
Zihao Wang ◽  
Liujie Guo
Keyword(s):  
High Temperature ◽  
Asphalt Binder ◽  
Evaluation Index ◽  
Temperature Property ◽  
Modified Asphalt ◽  
Property Evaluation ◽  
Before And After ◽  
High Temperature Property ◽  
Polymer Modified Asphalt ◽  
Sbs Modified Asphalt

Abstract In order to better evaluate the composite modified asphalt of composite modified asphalt, this study through dynamic shear rheological (DSR) test, the three kinds of polymer modified asphalt before and after ageing: the compound modified asphalt (CCR), rubber powder modified asphalt (CR) and composite modified asphalt of SBS modified asphalt (SBS) analysis, to explore suitable for composite modified asphalt of modified asphalt evaluation index. The results show that: Compared with G*/sinδ, G*/(sinδ)9 has higher accuracy for evaluating the composite modified asphalt of polymer modified asphalt and is more sensitive to changes in phase angle. The critical temperature of anti-rutting factor TG*/sinδ9 is significantly higher than that of TG*/sinδ, especially for composite modified asphalt. This has an important impact on the PG classification in the Superpave asphalt binder specification. G*/sinδ underestimates the high temperature grade of the modified asphalt. The equivalent viscosity measured with η’ = sinδ-4.8628 G*/ω has the best correlation with the anti-rutting factor G*/(sinδ)9, and the highest correlation coefficient is 0.999, which is more suitable as a high-temperature property evaluation index of modified asphalt.

Sol-gel process and high-temperature property of SiO2/ZrO2-SiO2 composites

2017 ◽  
Vol 43 (1) ◽  
pp. 854-859 ◽  
Author(s):  
Xiang Yang ◽  
Wang Qing ◽  
Cao Feng ◽  
Ma Yin-Wei ◽  
Quan Dong-liang
Keyword(s):  
High Temperature ◽  
Sol Gel ◽  
Temperature Property ◽  
Sol Gel Process ◽  
High Temperature Property

scholarly journals Research on the Properties of Low Temperature and Anti-UV of Asphalt with Nano-ZnO/Nano-TiO2/Copolymer SBS Composite Modified in High-Altitude Areas

2020 ◽  
Vol 2020 ◽  
pp. 1-15 ◽  
Author(s):  
Xiangbing Xie ◽  
Tao Hui ◽  
Yaofei Luo ◽  
Han Li ◽  
Guanghui Li ◽  
...  
Keyword(s):  
Surface Modification ◽  
High Temperature ◽  
Low Temperature ◽  
Orthogonal Test ◽  
Nano Zno ◽  
Carbonyl Index ◽  
Modified Asphalt ◽  
Temperature Performance ◽  
Before And After ◽  
Sbs Modified Asphalt

Strong ultraviolet light and low-temperature are the typical environmental characteristics in high-altitude areas. The performance of SBS-modified asphalt in the above environmental characteristics needs further study. To improve the resistance ultraviolet (UV) ageing and low-temperature performance of copolymer- (SBS-) modified asphalt, an SBS-modified asphalt containing nano-ZnO and nano-TiO2 is proposed. In this paper, nano-ZnO, nano-TiO2, and SBS were used as modifiers with the silane coupling agent (KH-560) as the nanomaterial surface modification. The orthogonal test table was used to analyse the effects of the three modifiers on the physical properties of modified asphalt at different dosages. On this basis, the physical properties, low-temperature properties, and ageing indices (carbonyl index and sulfoxide index) were studied for base asphalt, SBS-modified asphalt, nano-ZnO/SBS-modified asphalt, and nano-ZnO/nano-TiO2/SBS composite-modified asphalt before and after photoaging. The content changes of characteristic elements (Zn and Ti) in the nano-ZnO/nano-TiO2/SBS composite-modified asphalt before and after ageing were studied by scanning electron microscopy with energy dispersive spectroscopy (SEM/EDS), and the UV ageing mechanism was revealed. The results indicate that two nanoparticles show the best compatibility with asphalt after surface modification and can improve the binding ability between SBS and base asphalt. The orthogonal test analysis shows that nano-ZnO has a highly significant effect on the low- and high-temperature performance of the nano-ZnO/nano-TiO2/SBS composite-modified asphalt, and nano-TiO2 has a significant effect on the high-temperature performance. Three optimal composite-modified systems for base asphalt including 4% nano-ZnO/1.5% nano-TiO2/3.2% SBS were proposed and had the best antiaging ability. Compared with the sulfoxide index, the carbonyl index changed most obviously before and after ageing. Additionally, the results reveal that nano-TiO2 has a good absorption effect at a wavelength of 365 nm (ultraviolet light), while nano-ZnO is liable to photolysis, and its activity decreases at this wavelength.

Influence of Modifier Dosage and Aging Time on the SBS Modified Asphalt

2014 ◽  
Vol 505-506 ◽  
pp. 260-264
Author(s):  
Bai Lin Wang ◽  
Min Nan Zheng ◽  
Jie Zhang ◽  
Jiu Guang Geng
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Aging Time ◽  
Asphalt Pavement ◽  
High Grade ◽  
Modified Asphalt ◽  
Index Analysis ◽  
Pavement Engineering ◽  
Sbs Modified Asphalt ◽  
Physical Index

SBS modified asphalt has good performance of high temperature and low temperature, it is widely used in high-grade asphalt pavement engineering. But the aging will influence the using performance of asphalt, we select four dosages of modifier and aging for different time, Experimental results show that with the increase of aging time, asphalt penetration is reduced, softening point is elevated, ductility is decreased. According to the macro physical index analysis, find that SBS modified asphalt’s anti-aging performance is improved.

The Rejuvenating and Aging Performances of Aged SBS Modified Asphalt Treated by Different Rejuvenator Sealer Materials

2013 ◽  
Vol 753-755 ◽  
pp. 734-740 ◽  
Author(s):  
Li Wan ◽  
Shao Peng Wu ◽  
Min Lei ◽  
Kim Jenkins
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Economic Benefits ◽  
Modified Asphalt ◽  
Temperature Performance ◽  
Low Performance ◽  
Aged Binder ◽  
Styrene Butadiene ◽  
Sbs Modified Asphalt ◽  
Butadiene Styrene

Currently, rejuvenator seal which is one of the preventive maintenance methods is more widely used due to its economic benefits and convenience. This paper described the chemical and rheological evaluation of the aged styrene butadiene styrene modified asphalt (ASMA) treated by two rejuvenator sealer materials (RSMs). First the ASMA was rejuvenated by mixing with the RSMs. Then the ASMA and two rejuvenated binders were re-aged by 10h PAV test. At last, the new binder, ASMA, rejuvenated ASMAs, re-aged binders were tested by Dynamic shear rheometer (DSR) and Fourier Transform Infrared Spectroscopy (FTIR). The results showed that the first aging of the new binder had a significant decrease of the low temperature performance and slight improvement of the high temperature performance. In addition, the high temperature performance increased obviously after 10h PAV test. Two RSMs could significantly soften the aged binder due to increase of maltene content existing in the RSMs, and the rejuvenated binder exhibited a better low performance after the 10h PAV test. However they cannot restore the low temperature completely because that RSMs cannot remedy the degradation of SBS modifier and remove the carbonyl produced in the aging progress.

Sign in / Sign up

Export Citation Format

Share Document