ChemInform Abstract: Growth of Buried Oxide Layers of Silicon-on-Insulator (SOI) Structures by Thermal Oxidation of the Top Silicon Layer.

ChemInform ◽  
2010 ◽  
Vol 28 (43) ◽  
pp. no-no
Author(s):  
E. SCHROER ◽  
S. HOPFE ◽  
Q. Y. TONG ◽  
U. GOESELE ◽  
W. SKORUPA
1997 ◽  
Vol 144 (6) ◽  
pp. 2205-2210 ◽  
Author(s):  
E. Schroer ◽  
S. Hopfe ◽  
Q. Y. Tong ◽  
U. Gösele ◽  
W. Skorupa

Author(s):  
N. David Theodore ◽  
Juergen Foerstner ◽  
Peter Fejes

As semiconductor device dimensions shrink and packing-densities rise, issues of parasitic capacitance and circuit speed become increasingly important. The use of thin-film silicon-on-insulator (TFSOI) substrates for device fabrication is being explored in order to increase switching speeds. One version of TFSOI being explored for device fabrication is SIMOX (Silicon-separation by Implanted OXygen).A buried oxide layer is created by highdose oxygen implantation into silicon wafers followed by annealing to cause coalescence of oxide regions into a continuous layer. A thin silicon layer remains above the buried oxide (~220 nm Si after additional thinning). Device structures can now be fabricated upon this thin silicon layer.Current fabrication of metal-oxidesemiconductor field-effect transistors (MOSFETs) requires formation of a polysilicon/oxide gate between source and drain regions. Contact to the source/drain and gate regions is typically made by use of TiSi2 layers followedby Al(Cu) metal lines. TiSi2 has a relatively low contact resistance and reduces the series resistance of both source/drain as well as gate regions


1996 ◽  
Vol 36 (1-3) ◽  
pp. 237-240 ◽  
Author(s):  
E. Schroer ◽  
S. Hopfe ◽  
J.-Y. Huh ◽  
U. Gösele

1985 ◽  
Vol 53 ◽  
Author(s):  
B.-Y Mao ◽  
P.-H. Chang ◽  
H.W. Lam ◽  
B.W. Shen ◽  
J.A. Keenan

ABSTRACTThe effects of post implantation annealing on the properties of buried oxide silicon-on-insulator (SOI) substrates in the temperature range of 1150°C to 1300°C have been studied. Microstructural analyses showed that the crystallinity of the top silicon layer was improved at higher annealing temperature. Lower thermal donor generation at 450°C was observed in SOI annealed at higher temperature. The improvement in microstructure and lower thermal donor generation were correlated to the lower oxygen concentration in the top silicon film.


1983 ◽  
Vol 27 ◽  
Author(s):  
Russell F. Pinizzotto

ABSTRACTSilicon-on-Insulator structures will be an important technological advance used in future VLSI, VHSIC and threedimensional integrated circuits. The most mature SOI technology other than silicon-on-sapphire is SIMOX, or Separation by Implanted Oxygen. High energy oxygen ions are implanted into single crystal silicon until a stoichiometric buried silicon dioxide layer is formed. After implantation, the material is annealed at high temperature to remove implantation induced defects. The structure is completed by the growth of a thin epitaxial silicon layer. Devices and complex circuits have been successfully fabricated by several research groups. This paper reviews the development of this buried oxide SOI technology from 1973 to 1983. The five major sections discuss the advantages of SOI, the basics of buried oxide formation, the literature published between 1973 and 1983, key issues that must be solved before large scale implementation takes place and, finally, predictions of future developments.


1985 ◽  
Vol 45 ◽  
Author(s):  
Geoff Ryding

ABSTRACTsemiconductor doping. This paper surveys some of the equipment developed at Eaton Corporation in response to the proliferation of ion implanted devices. Developments in both high current (~10mA) and medium current (~1mA) implanters will be discussed.The evolution of dedicated equipment for the production of buried oxide layers (silicon on insulator technology) will also be reviewed.


Sign in / Sign up

Export Citation Format

Share Document