25.1: Invited Paper: Quantum dots based full-color display on micro-light-emitting-diode technology

2018 ◽  
Vol 49 ◽  
pp. 267-270 ◽  
Author(s):  
CHIH-HAO LIN ◽  
CHUN-FU LEE ◽  
CHIEN-CHUNG LIN ◽  
CHEN-HSIEN CHU ◽  
CHIN-WEI SHER ◽  
...  
2020 ◽  
Vol 15 (1) ◽  
Author(s):  
Lung-Chien Chen ◽  
Yi-Tsung Chang ◽  
Ching-Ho Tien ◽  
Yu-Chun Yeh ◽  
Zong-Liang Tseng ◽  
...  

AbstractThis work presents a method for obtaining a color-converted red light source through a combination of a blue GaN light-emitting diode and a red fluorescent color conversion film of a perovskite CsPbI3/TOPO composite. High-quality CsPbI3 quantum dots (QDs) were prepared using the hot-injection method. The colloidal QD solutions were mixed with different ratios of trioctylphosphine oxide (TOPO) to form nanowires. The color conversion films prepared by the mixed ultraviolet resin and colloidal solutions were coated on blue LEDs. The optical and electrical properties of the devices were measured and analyzed at an injection current of 50 mA; it was observed that the strongest red light intensity was 93.1 cd/m2 and the external quantum efficiency was 5.7% at a wavelength of approximately 708 nm when CsPbI3/TOPO was 1:0.35.


Author(s):  
Xuyong Yang ◽  
Evren Mutlugun ◽  
Yuan Gao ◽  
Yongbiao Zhao ◽  
Swee Tiam Tan ◽  
...  

2012 ◽  
Vol 51 ◽  
pp. 09MH03
Author(s):  
Byoung Wook Kwon ◽  
Dong Ick Son ◽  
Dong-Hee Park ◽  
Heon-Jin Choi ◽  
Won-Kook Choi

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Fumiya Osawa ◽  
Kazuhiro Marumoto

Abstract Spin-states and charge-trappings in blue organic light-emitting diodes (OLEDs) are important issues for developing high-device-performance application such as full-color displays and white illumination. However, they have not yet been completely clarified because of the lack of a study from a microscopic viewpoint. Here, we report operando electron spin resonance (ESR) spectroscopy to investigate the spin-states and charge-trappings in organic semiconductor materials used for blue OLEDs such as a blue light-emitting material 1-bis(2-naphthyl)anthracene (ADN) using metal–insulator–semiconductor (MIS) diodes, hole or electron only devices, and blue OLEDs from the microscopic viewpoint. We have clarified spin-states of electrically accumulated holes and electrons and their charge-trappings in the MIS diodes at the molecular level by directly observing their electrically-induced ESR signals; the spin-states are well reproduced by density functional theory. In contrast to a green light-emitting material, the ADN radical anions largely accumulate in the film, which will cause the large degradation of the molecule and devices. The result will give deeper understanding of blue OLEDs and be useful for developing high-performance and durable devices.


2016 ◽  
Author(s):  
Renjie Wang ◽  
Yong-Ho Ra ◽  
Yuanpeng Wu ◽  
Songrui Zhao ◽  
Hieu P. T. Nguyen ◽  
...  

2021 ◽  
Vol 9 ◽  
Author(s):  
Wenqing Zhu ◽  
Kuangyu Ding ◽  
Chen Yi ◽  
Ruilin Chen ◽  
Bin Wei ◽  
...  

In this study, we have synthesized the molybdenum sulfide quantum dots (MoS2 QDs) and zinc sulfide quantum dots (ZnS QDs) and demonstrated a highly efficient green phosphorescent organic light-emitting diode (OLED) with hybrid poly (3,4-ethylenedioxythiophene)/poly (styrenesulfonate) (PEDOT:PSS)/QDs hole injection layer (HIL). The electroluminescent properties of PEDOT:PSS and hybrid HIL based devices were explored. An optimized OLED based on the PEDOT:PSS/MoS2 QDs HIL exhibited maximum current efficiency (CE) of 72.7 cd A−1, which shows a 28.2% enhancement as compared to counterpart with single PEDOT:PSS HIL. The higher device performance of OLED with hybrid HIL can be attributed to the enhanced hole injection capacity and balanced charge carrier transportation in the OLED devices. The above analysis illustrates an alternative way to fabricate the high efficiency OLEDs with sulfide quantum dots as a HIL.


2018 ◽  
Vol 6 (12) ◽  
pp. 3089-3096 ◽  
Author(s):  
Sheng Dai ◽  
Cyuan-Bin Siao ◽  
Shu-Ru Chung ◽  
Kuan-Wen Wang ◽  
Xiaoqing Pan

The size and fraction of red and green CdSe QDs can be controlled precisely during the synthetic process, thus manifesting remarkably enhanced stability.


Sign in / Sign up

Export Citation Format

Share Document