New insights on effects of directionality and duration of near-field ground motions on seismic response of tall buildings

2017 ◽  
Vol 26 (11) ◽  
pp. e1363 ◽  
Author(s):  
Manuel Archila ◽  
Carlos E. Ventura ◽  
W. D. Liam Finn
Keyword(s):  
Seismic Response ◽  
Ground Motions ◽  
Near Field ◽  
Tall Buildings

scholarly journals On the Seismic Response of Protected and Unprotected Middle-Rise Steel Frames in Far-Field and Near-Field Areas

2014 ◽  
Vol 2014 ◽  
pp. 1-11 ◽  
Author(s):  
Dora Foti
Keyword(s):  
Seismic Response ◽  
Ground Motions ◽  
Near Field ◽  
Shaking Table ◽  
Far Field ◽  
Base Shear ◽  
Friction Dampers ◽  
Steel Moment Resisting Frames ◽  
Damage Indices ◽  
Moment Resisting

Several steel moment-resisting framed buildings were seriously damaged during Northridge (1994); Kobe (1995); Kocaeli, Turkey (1999), earthquakes. Indeed, for all these cases, the earthquake source was located under the urban area and most victims were in near-field areas. In fact near-field ground motions show velocity and displacement peaks higher than far-field ones. Therefore, the importance of considering near-field ground motion effects in the seismic design of structures is clear. This study analyzes the seismic response of five-story steel moment-resisting frames subjected to Loma Prieta (1989) earthquake—Gilroy (far-field) register and Santa Cruz (near-field) register. The design of the frames verifies all the resistance and stability Eurocodes’ requirements and the first mode has been determined from previous shaking-table tests. In the frames two diagonal braces are installed in different positions. Therefore, ten cases with different periods are considered. Also, friction dampers are installed in substitution of the braces. The behaviour of the braced models under the far-field and the near-field records is analysed. The responses of the aforementioned frames equipped with friction dampers and subjected to the same ground motions are discussed. The maximum response of the examined model structures with and without passive dampers is analysed in terms of damage indices, acceleration amplification, base shear, and interstory drifts.

scholarly journals Seismic Response of Container Crane under Near-Field and Far-Field Ground Motions

2021 ◽  
Vol 11 (4) ◽  
pp. 1740
Author(s):  
Van Bac Nguyen ◽  
Jungwon Huh ◽  
Bismark Kofi Meisuh ◽  
Jongwoo Kim ◽  
Inn-Joon Park
Keyword(s):  
Seismic Response ◽  
Shaking Table Test ◽  
Ground Motions ◽  
Near Field ◽  
Bending Moment ◽  
Shaking Table ◽  
Far Field ◽  
Container Crane ◽  
National University ◽  
Geometric Length

In this study, the seismic response of a container crane under near-field and far-field ground motions was investigated using a shaking table test on a 1/20 scale crane. The 1/20 scale crane was designed and fabricated based on the similitude laws, in which three independent quantities: geometric length, acceleration, and elastic modulus, were used to design the 1/20 scale crane. A series of shaking table tests were conducted at the Seismic Research and Test Center, Pusan National University, Yangsan Campus to evaluate the seismic response of the scale crane under near-field and far-field ground motions. The results show that the near-field ground motions can cause larger internal forces (that is, axial force and two bending moments) in the landside and seaside legs and larger portal drift than the far-field ground motions. The portal drift of the container crane subjected to the near-field ground motions was 43% higher than that of the container crane subjected to the far-field ground motions. Furthermore, when subjected to the near-field ground motion, the bending moment in the crane’s portal leg was 37% higher than the bending moment when the crane was subjected to the far-field ground motions.

Effects of Fling Step and Forward Directivity on Seismic Response of Buildings

2006 ◽  
Vol 22 (2) ◽  
pp. 367-390 ◽  
Author(s):  
Erol Kalkan ◽  
Sashi K. Kunnath
Keyword(s):  
Seismic Response ◽  
Ground Motions ◽  
High Amplitude ◽  
Moment Frames ◽  
Steel Moment Frames ◽  
Damage Potential ◽  
Near Fault ◽  
Forward Directivity ◽  
Fling Step ◽  
Far Fault

This paper investigates the consequences of well-known characteristics of near-fault ground motions on the seismic response of steel moment frames. Additionally, idealized pulses are utilized in a separate study to gain further insight into the effects of high-amplitude pulses on structural demands. Simple input pulses were also synthesized to simulate artificial fling-step effects in ground motions originally having forward directivity. Findings from the study reveal that median maximum demands and the dispersion in the peak values were higher for near-fault records than far-fault motions. The arrival of the velocity pulse in a near-fault record causes the structure to dissipate considerable input energy in relatively few plastic cycles, whereas cumulative effects from increased cyclic demands are more pronounced in far-fault records. For pulse-type input, the maximum demand is a function of the ratio of the pulse period to the fundamental period of the structure. Records with fling effects were found to excite systems primarily in their fundamental mode while waveforms with forward directivity in the absence of fling caused higher modes to be activated. It is concluded that the acceleration and velocity spectra, when examined collectively, can be utilized to reasonably assess the damage potential of near-fault records.

scholarly journals Seismic rocking effects on a mine tower under induced and natural earthquakes

2021 ◽  
Vol 21 (2) ◽  
Author(s):  
Piotr Adam Bońkowski ◽  
Juliusz Kuś ◽  
Zbigniew Zembaty
Keyword(s):  
Seismic Response ◽  
Ground Motion ◽  
Ground Surface ◽  
Tall Buildings ◽  
Earthquake Ground Motion ◽  
Seismic Action ◽  
Seismic Effects ◽  
Copper Ore ◽  
Rotational Components ◽  
Natural Earthquakes

AbstractRecent research in engineering seismology demonstrated that in addition to three translational seismic excitations along x, y and z axes, one should also consider rotational components about these axes when calculating design seismic loads for structures. The objective of this paper is to present the results of a seismic response numerical analysis of a mine tower (also called in the literature a headframe or a pit frame). These structures are used in deep mining on the ground surface to hoist output (e.g. copper ore or coal). The mine towers belong to the tall, slender structures, for which rocking excitations may be important. In the numerical example, a typical steel headframe 64 m high is analysed under two records of simultaneous rocking and horizontal seismic action of an induced mine shock and a natural earthquake. As a result, a complicated interaction of rocking seismic effects with horizontal excitations is observed. The contribution of the rocking component may sometimes reduce the overall seismic response, but in most cases, it substantially increases the seismic response of the analysed headframe. It is concluded that in the analysed case of the 64 m mining tower, the seismic response, including the rocking ground motion effects, may increase up to 31% (for natural earthquake ground motion) or even up to 135% (for mining-induced, rockburst seismic effects). This means that not only in the case of the design of very tall buildings or industrial chimneys but also for specific yet very common structures like mine towers, including the rotational seismic effects may play an important role.

Sign in / Sign up

Export Citation Format

Share Document