A prototype software simulator for FGHC

1987 ◽  
pp. 46-57
Author(s):  
Y. Ohara ◽  
S. Torii ◽  
E. Ono ◽  
M. Kishishita ◽  
J. Tanaka ◽  
...  
Keyword(s):  
Prototype Software

scholarly journals Evaluation model: A performance appraisal model for certified lecturers

2018 ◽  
Vol 49 ◽  
pp. 02003
Author(s):  
Dyah Ayu Puri Palupi ◽  
Mardanung Patmo Cahjono ◽  
Kristyana Dananti
Keyword(s):  
Performance Appraisal ◽  
Evaluation Model ◽  
Group Discussion ◽  
Valuable Contribution ◽  
Web Based ◽  
Software Application ◽  
The Government ◽  
Program Test ◽  
Prototype Software ◽  
Efficient Software

This study aims to develop lecturer performance appraisal model using web-based Integrated Evaluation Model (IEM). The object of this study is certified lecturers in Indonesia, by applying this model, the certification compensation given by the government is really used to enhance lecturer's performance. It is expected that the results of this study can be an important research that produces effective and efficient software to evaluate the lecturers' performance nationally because it involves a 360degree assessment. We have done some activities to develop the prototype software application of Integrated Evaluation Model (IEM) for assessing the certified lecturer's performance. They are 1) preparing the questionnaire indicator for the 360 degree performance appraisal, 2) conduct the program test on the certified lecturer. In this phase, certified lecturers, superior, and students also conduct assessment on certified lecturers through IEM software, 3) conduct Focus Group Discussion (FGD) to gain evaluation and feedback on the effectiveness of the IEM application program. FGD results provide a valuable contribution to the preparation of IEM program design. And the IEM software produced in this research has accommodated all of the results of FGD activities. IEM complements the prior certified lecturer performance appraisal with 360 degrees performance appraisal.

INSTANCE MIGRATION BETWEEN ONTOLOGIES HAVING STRUCTURAL DIFFERENCES

2011 ◽  
Vol 20 (06) ◽  
pp. 1127-1156 ◽  
Author(s):  
MAXIM DAVIDOVSKY ◽  
VADIM ERMOLAYEV ◽  
VYACHESLAV TOLOK
Keyword(s):  
Knowledge Management ◽  
Life Cycle ◽  
Structural Changes ◽  
Software Framework ◽  
Ontology Alignment ◽  
Transformation Rules ◽  
Structural Differences ◽  
Prototype Software ◽  
Descriptive Theories ◽  
Future Work

Ontology instance migration is one of the complex and not fully solved problems in knowledge management. A solution is required when the ontology schema evolves in the life cycle and the assertions have to be transferred to the newer version. The problem may become more complex in distributed settings when, for example, several autonomous software entities use and exchange partial assertional knowledge in a domain that is formalized by different though semantically overlapping descriptive theories. Such an exchange is essentially the migration of the assertional part of an ontology to other ontologies belonging to or used by different entities. The paper presents our method and tool for migrating instances between the ontologies that have structurally different but semantically overlapping schemas. The approach is based on the use of the manually coded transformation rules describing the changes between the input and the output ontologies. The tool is implemented as a plug-in for the ProjectNavigator prototype software framework. The article also reports the results of our three evaluation experiments. In these experiments we evaluated the degree of complexity in the structural changes to which our approach remains valid. We also chose the ontology sets in one of the experiments to make the results comparable with the ontology alignment software. Finally we checked how well our approach scales with the increase of the quantity of the migrated ontology instances to the numbers that are characteristic to industrial ontologies. In our opinion the evaluation results are satisfactory and suggest some directions for the future work.

Fully Free-Form Deformation Features (δ-F4) Incorporating Discontinuities

2004 ◽  
Author(s):  
Vincent Cheutet ◽  
Jean-Philippe Pernot ◽  
Jean-Claude Leon ◽  
Bianca Falcidieno ◽  
Franca Giannini
Keyword(s):  
Surface Deformation ◽  
Geometric Constraints ◽  
Free Form ◽  
Initial Surface ◽  
Cad Systems ◽  
Free Form Deformation ◽  
Deformation Features ◽  
Generate Surface ◽  
Prototype Software ◽  
Free Form Surfaces

To limit low-level manipulations of free-form surfaces, the concept of Fully Free Form Deformation Features (δ-F4) have been introduced. They correspond to shapes obtained by deformation of a surface area according to specified geometric constraints. In our work, we mainly focused on those features aimed at enforcing the visual effect of the so-called character lines, extensively used by designers to specify the shape of an object. Therefore, in the proposed approach, 3D lines are used to drive surface deformation over specified areas. Depending on the wished shape and reflection light effects, the insertion of character lines may generate surface tangency discontinuities. In CAD systems, such kind of discontinuities is generally created by a decomposition of the initial surface into several patches. This process can be tedious and very complex, depending on the shape of the deformation area and the desired surface continuity. Here, a method is proposed to create discontinuities on a surface, using the trimming properties of surfaces. The corresponding deformation features produce the resulting surface in a single modification step and handle simultaneously more constraints than current CAD systems. The principle of the proposed approach is based on arbitrary shaped discontinuities in the parameter domain of the surface to allow the surface exhibiting geometric discontinuities at user-prescribed points or along lines. The proposed approach is illustrated with examples obtained using our prototype software.

scholarly journals Postoperative determination of the degree of carotid artery stenosis

2013 ◽  
Vol 12 (2) ◽  
pp. 129-132
Author(s):  
J. Janzen ◽  
P. Chenais ◽  
W. Janzen ◽  
F. Schibler ◽  
J. Schmidli
Keyword(s):  
Carotid Artery ◽  
Carotid Artery Stenosis ◽  
Artery Stenosis ◽  
First Results ◽  
Prototype Software

This article describes the VascMorph 1a prototype software and reports first results obtained with postoperative determination of the degree of stenosis in the carotid artery.

scholarly journals INFORMATION SYSTEM FOR INVENTORY OF GOODS USING PROTOTYPE MODEL

2021 ◽  
Vol 3 (2) ◽  
pp. 175-180
Author(s):  
Syahriani Syahriani ◽  
Basuki Basuki ◽  
Luthfi Indriyani
Keyword(s):  
Information System ◽  
Inventory Management ◽  
Prototype Model ◽  
Company Performance ◽  
Software Model ◽  
Effectiveness And Efficiency ◽  
Access Rights ◽  
Prototype Software ◽  
Important Activity

Inventory management is the most important activity, because if the inventory in the warehouse is not managed properly, it will allow a decrease in profits and loss of customers. PT Andalan Teknik Karetindo Putra Bangsa has weaknesses in its inventory management activities, where the presentation of the information is done manually, namely through the process of recording in a book, then transferred to the Speedsheet application. Sometimes the data submitted is inaccurate, that is, there are still errors regarding the stock of goods. In this research, we used a prototype software model.. Making this website is made to overcome these problems and to increase the effectiveness and efficiency of company performance. Where we make 2 level access rights, namely for warehouse staff and company leaders. With this website, warehouse staff can quickly and accurately find out the availability of goods and leaders can immediately find out the stock of goods available in the warehouse and can immediately print inventory reports without having to ask to the warehouse

scholarly journals The Indirect Spaced Repetition Concept

2020 ◽  
Vol 9 (2) ◽  
pp. 9-16
Author(s):  
L Lafleur ◽  
Keyword(s):  
Performance Feedback ◽  
Teaching And Learning ◽  
Word Knowledge ◽  
It Infrastructure ◽  
Form And Function ◽  
Balanced Approach ◽  
Post Test ◽  
Prototype Software ◽  
And Function ◽  
Spaced Repetition

The main goal of this research is to systemize, build, and test prototype software to demonstrate Indirect Spaced Repetition (ISR) as a viable concept for Second Language Vocabulary Acquisition (SLVA). ISR is designed around well-founded spaced repetition and SLVA principles. Most importantly, it is based on Nation’s (2001) recommendation to consider all three tiers of word knowledge (meaning, form, and function/use) and subsequent 18 aspects of word knowledge for a more balanced approach in teaching and learning vocabulary. ISR prototype software was achieved in the conceptual phase of the research. The resulting prototype flashcard software was given an in-depth trial for a period of 2 weeks by seven university students. Participants were given a post-project survey to evaluate ISR software (ISRS) under four categories: enjoyment, usefulness, usability, and general consideration. Post-test survey findings showed above-average satisfaction and consideration to use such software in the future. However, these findings also revealed that some areas could be further improved, such as addressing some hardware/software issues (e.g., IT infrastructure problematics and lag) and integrating gamification elements (e.g., performance feedback/reports).

A Set-Based System for Eliminating Infeasible Designs in Engineering Problems Dominated by Uncertainty

1997 ◽  
Author(s):  
William W. Finch ◽  
Allen C. Ward
Keyword(s):  
Electronic Circuit ◽  
Predicate Logic ◽  
Software Tool ◽  
Design Parameters ◽  
Engineering Systems ◽  
Multiple Sources ◽  
Design Problems ◽  
Engineering Design Problems ◽  
Engineering Problems ◽  
Prototype Software

Abstract This paper gives an overview of a system which eliminates infeasible designs from engineering design problems dominated by multiple sources of uncertainty. It outlines methods for representing constraints on sets of values for design parameters using quantified relations, a special class of predicate logic expressions which express some of the causal information inherent in engineering systems. The paper extends constraint satisfaction techniques and describes elimination algorithms that operate on quantified relations and catalogs of toleranced or adjustable parts. It demonstrates the utility of these tools on a simple electronic circuit, and describes their implementation and test in a prototype software tool.

Sign in / Sign up

Export Citation Format

Share Document