The Toughness of M2 High-Speed Steel

1975 ◽  
pp. 713-719 ◽  
Author(s):  
G. Berry ◽  
M. J. Kadhim Al-Tornachi
Keyword(s):  
High Speed ◽  
High Speed Steel ◽  
M2 High Speed Steel

LATROBE M2 EUR

Alloy Digest ◽  
2010 ◽  
Vol 59 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Physical Properties ◽  
High Speed ◽  
High Speed Steel ◽  
Heat Treating ◽  
General Purpose ◽  
Steel Company ◽  
M2 High Speed Steel ◽  
Specialty Steel

Abstract M2 EUR is the European version of the general purpose ASTM M2 high speed steel. This datasheet provides information on composition, physical properties, and elasticity as well as fracture toughness. It also includes information on wear resistance as well as heat treating and machining. Filing Code: TS-691. Producer or source: Latrobe Specialty Steel Company.

Metallographic analysis of M2 high speed steel granules

2019 ◽  
pp. 78-85
Author(s):  
L. E. Afanasieva
Keyword(s):  
Solid Solution ◽  
Cellular Structure ◽  
High Speed ◽  
Solution Structure ◽  
Supersaturated Solid Solution ◽  
High Speed Steel ◽  
Metallographic Analysis ◽  
M2 High Speed Steel ◽  
Melt Composition

The article is devoted to the metallographic analysis of the M2 high-speed steel granules. The study is based on the investigation of the microstructure of the M2 high-speed steel granules obtained by melt atomization. It is demonstrated that granules of similar size can harden both by chemically separating and chemically non-separating mechanism. These last ones have supersaturated solid solution structure of the liquid melt composition, a dispersed dendritic-cellular structure and an increased microhardness HV = 10267±201 MPa.

scholarly journals Selective Laser Melting of Crack-Free High Density M2 High Speed Steel Parts by Baseplate Preheating

2014 ◽  
Vol 136 (6) ◽  
Author(s):  
Karolien Kempen ◽  
Bey Vrancken ◽  
Sam Buls ◽  
Lore Thijs ◽  
Jan Van Humbeeck ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Selective Laser Melting ◽  
High Speed ◽  
Crack Formation ◽  
High Speed Steel ◽  
Thermal Gradients ◽  
Laser Melting ◽  
Mechanical And Physical Properties ◽  
The World ◽  
M2 High Speed Steel

Cracks and delamination, resulting from residual stresses, are a barrier in the world of additive manufacturing and selective laser melting (SLM) that prohibits the use of many metals in this field. By preheating the baseplate, thermal gradients are lowered and stresses can be reduced. In this work, some initial tests were performed with M2 high speed steel (HSS). The influence of preheating on density and mechanical and physical properties is investigated. The paper shows many promising results for the production of SLM parts in materials that are very sensitive to crack formation and delamination. When using a preheating of 200 °C, crack-free M2 HSS parts were produced with a relative density of 99.8%.

The Influence of Sintering Atmosphere for Metal Injection Moulding M2 High Speed Steel

2014 ◽  
Vol 879 ◽  
pp. 169-174
Author(s):  
R. Sauti ◽  
N.A. Wahab ◽  
M.A. Omar ◽  
I.N. Ahmad
Keyword(s):  
Mechanical Properties ◽  
Injection Moulding ◽  
High Speed ◽  
High Speed Steel ◽  
Steel Powder ◽  
Sintering Atmosphere ◽  
Temperature Range ◽  
Waste Rubber ◽  
Vacuum Atmosphere ◽  
M2 High Speed Steel

This paper reports on the compatibility of waste rubber as binder for M2 High Speed Steel injection moulding. The feedstock was prepared at a powder loading of 65 vol.% using 22μm M2 High Speed Steel powder and the binders consisting of 55wt.% paraffin wax, 21wt.% polyethylene, 14wt.% waste rubber and 10wt.% stearic acid. The specimens were then sintered in vacuum and 95%N2/5%H2 atmosphere. The sintering in vacuum atmosphere occurred within a temperature range from1200°C to 1260°C, whilst the 95%N2/5%H2 atmosphere was carried out within a temperature range from 1220°C to 1300°C. The effects of the sintering atmosphere and temperature on the physical properties, mechanical properties and microstructure were investigated.

Residual Stress Analysis in Different Thickness TiN Coatings on High-Speed-Steel Substrates

2011 ◽  
Vol 239-242 ◽  
pp. 2331-2335 ◽  
Author(s):  
Fang Mei ◽  
Guang Zhou Sui ◽  
Man Feng Gong
Keyword(s):  
Residual Stresses ◽  
High Speed ◽  
Thermal Stresses ◽  
High Speed Steel ◽  
X Ray Diffraction ◽  
Tin Coatings ◽  
Compressive Stresses ◽  
M2 High Speed Steel ◽  
Steel Substrates ◽  
Different Thickness

TiN coatings were deposited on AISI M2 high-speed-steel (HSS) substrates by multi-arc ion plating technique. The thickness of substrate was 1.0 mm and five thicknesses of TiN coatings were 3.0, 5.0, 7.0, 9.0 and 11.0 μm, respectively. X-ray diffraction (XRD) has been used for measuring residual stresses. The stresses along five different directions (Ψ=0°, 20.7°, 30°, 37.8° and 45°) have been measured by recording the peak positions of TiN (220) reflection for each 2θ at different tilt angles Ψ. Residual compressive stresses present in the TiN coatings. Furthermore, the results revealed that the value of the residual stresses in TiN coatings was high. While the coatings thickness changed from 3 to 11 μm, the residual stresses varied from -3.22 to -2.04 GPa, the intrinsic stresses -1.32 to -0.14 GPa, the thermal stresses -1.86 to -1.75 GPa. The residual stresses in TiN coatings showed a nonlinear change. When the coatings thickness was about 8 μm, the residual stresses in TiN coatings reached to the maximum value.

Sign in / Sign up

Export Citation Format

Share Document