In Situ Methods for Identifying the Stem Cell of the Normal and Cancerous Breast

Author(s):  
Yanrong Su ◽  
Pedro J. Gutiérrez Diez ◽  
Julia Santucci-Pereira ◽  
Irma H. Russo ◽  
Jose Russo
Keyword(s):  
2019 ◽  
Vol 3 ◽  
pp. 1255
Author(s):  
Ahmad Salahuddin Mohd Harithuddin ◽  
Mohd Fazri Sedan ◽  
Syaril Azrad Md Ali ◽  
Shattri Mansor ◽  
Hamid Reza Jifroudi ◽  
...  

Unmanned aerial systems (UAS) has many advantages in the fields of SURVAILLANCE and disaster management compared to space-borne observation, manned missions and in situ methods. The reasons include cost effectiveness, operational safety, and mission efficiency. This has in turn underlined the importance of UAS technology and highlighted a growing need in a more robust and efficient unmanned aerial vehicles to serve specific needs in SURVAILLANCE and disaster management. This paper first gives an overview on the framework for SURVAILLANCE particularly in applications of border control and disaster management and lists several phases of SURVAILLANCE and service descriptions. Based on this overview and SURVAILLANCE phases descriptions, we show the areas and services in which UAS can have significant advantage over traditional methods.


2005 ◽  
Vol 47 (1) ◽  
pp. 48-56 ◽  
Author(s):  
C E Hoei-Hansen ◽  
K Almstrup ◽  
J E Nielsen ◽  
S Brask Sonne ◽  
N Graem ◽  
...  

2012 ◽  
Vol 3 (6) ◽  
pp. 1186-1190 ◽  
Author(s):  
HIDEHIRO TAJIMA ◽  
TETSUO OHTA ◽  
HIROHISA KITAGAWA ◽  
KOICHI OKAMOTO ◽  
SEISHO SAKAI ◽  
...  

MRS Advances ◽  
2018 ◽  
Vol 3 (57-58) ◽  
pp. 3397-3402 ◽  
Author(s):  
L.K. Nanver ◽  
K. Lyon ◽  
X. Liu ◽  
J. Italiano ◽  
J. Huffman

ABSTRACTThe chemical-vapor deposition conditions for the growth of pure boron (PureB) layers on silicon at temperatures as low as 400°C were investigated with the purpose of optimizing photodiodes fabricated with PureB anodes for minimal B-layer thickness, low dark current and chemical robustness. The B-deposition is performed in a commercially-available Si epitaxial reactor from a diborane precursor. In-situ methods commonly used to improve the cleanliness of the Si surface before deposition are tested for a deposition temperature of 450°C and PureB layer thickness of 3 nm. Specifically, high-temperature baking in hydrogen, and exposure to HCl are tested. Both material analysis and electrical diode characterization indicate that these extra cleaning steps degrade the properties of the PureB layer and the fabricated diodes.


2020 ◽  
Vol 2 ◽  
pp. 3-18
Author(s):  
Ali Saberi Varzaneh ◽  
Mahmoud Naderi

Considering the differences between environmental conditions of concrete structures and laboratory conditions, it is important to determine the parameters of the materials at the site of the structure. One of these materials is cement-based repair mortars due to the damage of concrete structures that may arise due to chemical or physical factors, these structures are required to be repaired. For this reason, in this paper, to determine the strength of repair mortars of different ages and under different Curing, Situ methods "Friction-Transfer" and "Pull-off" were used and the relationships between the Flexural Compressive, Tensile and readings obtained from the above methods on cementations mortars are presented. Experiments were performed on mortars at ages 3, 7, 28, 42 and 90 days under the conditions of "waterlogging", "Curing Agent" and "releasing in the outdoor". The results show the high impact of the process on the Flexural Compressive, Tensile of the repair mortars and the results of the "Friction-Transfer" and "Pull-off" methods. Also, a high correlation coefficient was obtained between the mechanical properties of the mortars and the results of the above tests; it is possible to measure the mechanical properties of repair mortars in situ with high confidence and in situ


2012 ◽  
Vol 2012 ◽  
pp. 1-11 ◽  
Author(s):  
Patrick C. Baer ◽  
Helmut Geiger

Adipose tissue as a stem cell source is ubiquitously available and has several advantages compared to other sources. It is easily accessible in large quantities with minimal invasive harvesting procedure, and isolation of adipose-derived mesenchymal stromal/stem cells (ASCs) yields a high amount of stem cells, which is essential for stem-cell-based therapies and tissue engineering. Several studies have provided evidence that ASCs in situ reside in a perivascular niche, whereas the exact localization of ASCs in native adipose tissue is still under debate. ASCs are isolated by their capacity to adhere to plastic. Nevertheless, recent isolation and culture techniques lack standardization. Cultured cells are characterized by their expression of characteristic markers and their capacity to differentiate into cells from meso-, ecto-, and entodermal lineages. ASCs possess a high plasticity and differentiate into various cell types, including adipocytes, osteoblasts, chondrocytes, myocytes, hepatocytes, neural cells, and endothelial and epithelial cells. Nevertheless, recent studies suggest that ASCs are a heterogeneous mixture of cells containing subpopulations of stem and more committed progenitor cells. This paper summarizes and discusses the current knowledge of the tissue localization of ASCs in situ, their characterization and heterogeneityin vitro, and the lack of standardization in isolation and culture methods.


2011 ◽  
Vol 7 (4) ◽  
pp. 1460-1467 ◽  
Author(s):  
Leda Klouda ◽  
Kevin R. Perkins ◽  
Brendan M. Watson ◽  
Michael C. Hacker ◽  
Stephanie J. Bryant ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document