Simulation of a Flow in a Gas Turbine Exhaust Diffuser with Advanced Turbulence Models

2014 ◽  
pp. 463-477
Author(s):  
S. Brouwer ◽  
D. M. Vogt
Keyword(s):  
Gas Turbine ◽  
Turbulence Models ◽  
Gas Turbine Exhaust ◽  
Turbine Exhaust

CFD Analysis of Industrial Gas Turbine Exhaust Diffusers

2002 ◽  
Author(s):  
V. Vassiliev ◽  
S. Irmisch ◽  
S. Florjancic
Keyword(s):  
Gas Turbine ◽  
Measurement Data ◽  
Turbulence Models ◽  
Cfd Analysis ◽  
Cfd Modelling ◽  
Gas Turbine Exhaust ◽  
Key Aspects ◽  
Industrial Gas Turbine ◽  
Turbine Exhaust

The key aspects for the reliable CFD modelling of exhaust diffusers are addressed in this paper. In order to identify adequate turbulence models a number of 2D diffuser configurations have been simulated using different turbulence models and results have been compared with measurements. An automated procedure for a time- and resource-efficient and accurate prediction of complex diffuser configuration is presented. The adequate definitions of boundary conditions for the diffuser simulation using this procedure are discussed. In the second part of this paper, the CFD procedure is being applied to investigate the role of secondary flow on axial diffusers. Prediction results are discussed and compared with available measurement data.

Acoustic Characteristics of a Gas Turbine Exhaust Model

1974 ◽  
Vol 96 (3) ◽  
pp. 181-184 ◽  
Author(s):  
J. R. Cummins
Keyword(s):  
Gas Turbine ◽  
Acoustic Radiation ◽  
Flow Path ◽  
Scale Model ◽  
Temperature Ratio ◽  
Acoustic Characteristics ◽  
Gas Turbine Exhaust ◽  
Acoustical Data ◽  
Turbine Exhaust

To investigate the sources of acoustic radiation from a gas turbine exhaust, a one-seventh scale model has been constructed. The model geometrically scales the flow path downstream of the rotating parts including support struts and turning vanes. A discussion and comparison of different kinds of aerodynamic and acoustic scaling techniques are given. The effect of the temperature ratio between model and prototype is found to be an important parameter in comparing acoustical data.

Prediction of Pressure Rise in a Gas Turbine Exhaust Duct Under Flameout Scenarios While Operating On Hydrogen and Natural Gas Blends

2021 ◽  
Author(s):  
Orlando Ugarte ◽  
Suresh Menon ◽  
Wayne Rattigan ◽  
Paul Winstanley ◽  
Priyank Saxena ◽  
...  
Keyword(s):  
Natural Gas ◽  
Gas Turbine ◽  
Combustion Process ◽  
Pressure Rise ◽  
Combustion Model ◽  
Computational Domain ◽  
Cfd Model ◽  
Exhaust Duct ◽  
Gas Turbine Exhaust ◽  
Turbine Exhaust

Abstract In recent years, there is a growing interest in blending hydrogen with natural gas fuels to produce low carbon electricity. It is important to evaluate the safety of gas turbine packages under these conditions, such as late-light off and flameout scenarios. However, the assessment of the safety risks by performing experiments in full-scale exhaust ducts is a very expensive and, potentially, risky endeavor. Computational simulations using a high fidelity CFD model provide a cost-effective way of assessing the safety risk. In this study, a computational model is implemented to perform three dimensional, compressible and unsteady simulations of reacting flows in a gas turbine exhaust duct. Computational results were validated against data obtained at the simulated conditions in a representative geometry. Due to the enormous size of the geometry, special attention was given to the discretization of the computational domain and the combustion model. Results show that CFD model predicts main features of the pressure rise driven by the combustion process. The peak pressures obtained computationally and experimentally differed in 20%. This difference increased up to 45% by reducing the preheated inflow conditions. The effects of rig geometry and flow conditions on the accuracy of the CFD model are discussed.

scholarly journals General Design Considerations for Gas Turbine Waste Heat Steam Generators

1968 ◽  
Author(s):  
W. V. Hambleton
Keyword(s):  
Gas Turbine ◽  
Heat Recovery ◽  
Waste Heat ◽  
Steam Generation ◽  
Steam Generators ◽  
Design Considerations ◽  
Exhaust Heat ◽  
Gas Turbine Exhaust ◽  
Exhaust Heat Recovery ◽  
Turbine Exhaust

This paper represents a study of the overall problems encountered in large gas turbine exhaust heat recovery systems. A number of specific installations are described, including systems recovering heat in other than the conventional form of steam generation.

A Fluidic Technique for Measuring the Average Temperature in a Gas Turbine Exhaust Duct

1968 ◽  
Vol 90 (3) ◽  
pp. 265-270 ◽  
Author(s):  
C. G. Ringwall ◽  
L. R. Kelley
Keyword(s):  
Gas Turbine ◽  
Wave Velocity ◽  
Test Data ◽  
Output Pressure ◽  
Average Temperature ◽  
Phase Discrimination ◽  
Exhaust Duct ◽  
Average Wave ◽  
Gas Turbine Exhaust ◽  
Turbine Exhaust

Circuit concepts and test data for a fluidic system to sense the average temperature in a gas turbine exhaust duct are presented. Phase discrimination techniques are used to sense the average wave velocity in a long tube and to produce an output pressure differential proportional to temperature error.

scholarly journals A Different Approach to Gas Turbine Exhaust Silencing

1974 ◽  
Author(s):  
Marv Weiss
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Operating Conditions ◽  
Heavy Duty ◽  
Unique Method ◽  
Acoustic Testing ◽  
Gas Turbine Exhaust ◽  
Attenuation Values ◽  
Turbine Exhaust

A unique method for silencing heavy-duty gas turbines is described. The Switchback exhaust silencer which utilizes no conventional parallel baffles has at operating conditions measured attenuation values from 20 dB at 63 Hz to 45 dB at higher frequencies. Acoustic testing and analyses at both ambient and operating conditions are discussed.

scholarly journals High-Temperature Profile Monitoring in Gas Turbine Exhaust-Gas Diffusors with Six-Point Fiber-Optic Sensor Array

2020 ◽  
Vol 5 (4) ◽  
pp. 25
Author(s):  
Franz J. Dutz ◽  
Sven Boje ◽  
Ulrich Orth ◽  
Alexander W. Koch ◽  
Johannes Roths
Keyword(s):  
Gas Turbine ◽  
Fiber Optic ◽  
Characteristic Temperature ◽  
Fiber Optic Sensor ◽  
Exhaust Gas ◽  
Radial Temperature ◽  
Temperature Probe ◽  
Steel Protection ◽  
Gas Turbine Exhaust ◽  
Turbine Exhaust

In this paper, the deployment of a newly developed, multipoint, fiber-optic temperature-sensor system for temperature distribution measurements in a 6 MW gas turbine is demonstrated. The optical sensor fiber was integrated in a stainless steel protection cable with a 1.6 mm outside diameter. It included six measurement points, distributed over a length of 110 mm. The sensor cable was mounted in a temperature probe and was positioned radially in the exhaust-gas diffusor of the turbine. With this temperature probe, the radial temperature profiles in the exhaust-gas diffusor were measured with high spatial and temporal resolution. During a test run of the turbine, characteristic temperature gradients were observed when the machine operated at different loads.

scholarly journals A Fault Diagnosis Approach for Gas Turbine Exhaust Gas Temperature Based on Fuzzy C-Means Clustering and Support Vector Machine

2015 ◽  
Vol 2015 ◽  
pp. 1-11 ◽  
Author(s):  
Zhi-tao Wang ◽  
Ning-bo Zhao ◽  
Wei-ying Wang ◽  
Rui Tang ◽  
Shu-ying Li
Keyword(s):  
Fault Diagnosis ◽  
Gas Turbine ◽  
Clustering Algorithm ◽  
Support Vector ◽  
Exhaust Gas ◽  
Gas Temperature ◽  
Fcm Clustering ◽  
Gas Turbine Exhaust ◽  
Exhaust Gas Temperature ◽  
Turbine Exhaust

As an important gas path performance parameter of gas turbine, exhaust gas temperature (EGT) can represent the thermal health condition of gas turbine. In order to monitor and diagnose the EGT effectively, a fusion approach based on fuzzy C-means (FCM) clustering algorithm and support vector machine (SVM) classification model is proposed in this paper. Considering the distribution characteristics of gas turbine EGT, FCM clustering algorithm is used to realize clustering analysis and obtain the state pattern, on the basis of which the preclassification of EGT is completed. Then, SVM multiclassification model is designed to carry out the state pattern recognition and fault diagnosis. As an example, the historical monitoring data of EGT from an industrial gas turbine is analyzed and used to verify the performance of the fusion fault diagnosis approach presented in this paper. The results show that this approach can make full use of the unsupervised feature extraction ability of FCM clustering algorithm and the sample classification generalization properties of SVM multiclassification model, which offers an effective way to realize the online condition recognition and fault diagnosis of gas turbine EGT.

Coal combustion with simulated gas turbine exhaust gas and catalytic oxidation of the unburnt fuel

Fuel ◽  
1998 ◽  
Vol 77 (12) ◽  
pp. 1357-1365 ◽  
Author(s):  
Emmanuel Kakaras ◽  
Panagiotis Vourliotis
Keyword(s):  
Gas Turbine ◽  
Catalytic Oxidation ◽  
Coal Combustion ◽  
Exhaust Gas ◽  
Gas Turbine Exhaust ◽  
Turbine Exhaust
Sign in / Sign up

Export Citation Format

Share Document