Tables for ascertaining the Density of American Mineral-Oils and their products by means of the Thermo-Areometer

1893 ◽  
Author(s):  
Keyword(s):  
Author(s):  
Madhubhushan M ◽  
Seshaiah S ◽  
Chandrudu J ◽  
Sagar R ◽  
Akila CR

The common watermelon item (Citrullus lanatus) seeds were gained from castoffs verdant nourishments for use by decorating, sun ventilation and pulverizing. Light yellow-toned oil was gotten by dissolvable withdrawal using oil atmosphere and the going with traits were gotten using oil ether: pH, refractive rundown, thickness, dissolvable miscibility, coagulating temperature, fire nature, express gravity, streak point and warmth of consuming. With a shallow level of unsaturation, stepped level of smoothness, and proximity of raised degree of the sensible proportion of free unsaturated fats. The low assessment of the solidifying temperature of the oil offered a hint that the oil can be managed in various areas paying little heed to the qualification in temperature. The following level of linoleic destructive of the oil offers a hint of natural gradation of solidarity. Fatty esters are increasing expanding significance as a biodegradable swap for mineral oils. In some request regions, for example, cutting tool oil, gearbox, pressure-driven oils, and greases for raw petroleum creation, the oleochemical items are set up. Nonetheless, certain particular wellsprings of fatty esters are hitherto to be abused for this comparative reason. This exploration subsequently tests into one of the less used wellsprings of fatty esters in watermelon. The oil from the kernels demonstrations a top-notch yield presents significant utilitarian gatherings for change and thus was utilized to set up an assortment of oleochemicals which demonstrated excellence materials in contrast with the routinely utilized oils feed frameworks for oleochemicals after portrayal. The photopolymers acquired indicated piercing vinyl protons for consistent polymerize.


Author(s):  
O. V. Grebeneva ◽  
A. Z. Shadetova ◽  
M. V. Rusyaev

The coefficients of danger to health of 84 workers of 4 lowering stations of the power enterprise from inhalation influence of pollutants of motor transport are calculated: nitrogen dioxide, dust, aerosols of mineral oils and hydrocarbons. The risk of combined effects of chemicals on the target organs was determined by an increase in the chance of respiratory diseases by 1.77 times.


2017 ◽  
pp. 91-95
Author(s):  
E. I. Grushova ◽  
A. .. Al Razuqi ◽  
E. S. Chaiko ◽  
O. A. Miloserdova

IR spectroscopy investigated structural and group composition of base mineral oils isolated from the vacuum distillate by selective purification of N-methylpyrrolidone and the low temperature dewaxing in the presence of a solvent. The role of the latter was carried out by the systems acetone - toluene, acetone - methyl tertiary butyl ether, methyl ethyl ketone - toluene, acetone - toluene - modifying additive. It was shown that the chemical composition of the group of base oils and slack waxes is defined as the nature of the solvent to the dewaxing, and oils sequence of purification steps.


2018 ◽  
Vol 68 (12) ◽  
pp. 2881-2885
Author(s):  
Iosif Lingvay ◽  
Gabriela Oprina ◽  
Livia Carmen Ungureanu ◽  
Alexandra Pica ◽  
Valerica Stanoi

The behaviour of copper and insulation paper in various electrical insulating fluids (transformer oils) exposed to thermal ageing at 110�30C for 1000 hours in closed vessels (without access to atmospheric oxygen) has been studied. The processing of the comparative experimental data revealed in all cases that the concentration of dissolved oxygen in the investigated oils decreases exponentially during the heat treatment. In the presence of the copper foil, the oxygen is almost depleted (the dissolved oxygen concentration is approaching zero), indicating a higher affinity of the copper to oxygen than the affinity to oxygen of the investigated oils. In the presence of the copper foil and / or of the insulation paper, the degradation processes of the mineral oils have a pronounced character, explained by the catalytic activity of the Cu2O film that has been formed and by the paper degradation, respectively. A high thermo-oxidative stability was noticed in the case of natural triglyceride oils, particularly for the synthetic ester-based oil.


2018 ◽  
Vol 69 (9) ◽  
pp. 2366-2371
Author(s):  
Andrei Cucos ◽  
Petru Budrugeac ◽  
Iosif Lingvay ◽  
Adriana Mariana Bors ◽  
Andreea Voina

Thermal TG/DTG/DTA analysis coupled with FTIR spectroscopy was applied to some sorts of mineral and vegetable oils used in electrical equipment. On heating in inert atmosphere, it was observed that the mineral oils vaporize, while the vegetable oils undergo hydrolysis, yielding fatty acids as main volatiles, as indicated by FTIR. In synthetic air, the FTIR spectra of gaseous products confirm the presence of similar oxidation products, both for mineral and vegetable oils. The TG results indicated that the vegetable-based oils exhibit a substantially higher thermal stability than the mineral oils. The presence or absence of anti-oxidant inhibitors in these oils greatly influences the onset of the oxidation process in air environment factor, as results from the DTA results.


1952 ◽  
Vol 6 ◽  
pp. 476-482 ◽  
Author(s):  
C. Boelhouwer ◽  
A.J. van Riemsdijk ◽  
J. van Steenis ◽  
H.I. Waterman

Author(s):  
Tobias Förster ◽  
Artur Blivernitz

AbstractThis work describes a newly introduced experimental procedure to quantify the diffusion progress of mineral oils locally resolved in NBR. Diffusion of reference oils IRM 901, IRM 902 and IRM 903 in NBR with various acrylonitrile contents was investigated. Classical sorption experiments were performed as a basic characterization and compared to the newly introduced method. Here, elastomer specimens are only being dipped with the bottom in a relatively small reservoir of mineral oil. This provides a determination of locally resolved concentration profiles of mineral oils, and the calculation of diffusion coefficients. These diffusion coefficients follow the same trends like those determined via sorption experiments. Despite differences in the absolute numbers, activation energies of diffusion can be applied as a suitable measure for the compatibility of elastomers and fluids.


Gels ◽  
2021 ◽  
Vol 7 (2) ◽  
pp. 61
Author(s):  
Kenneth P. Mineart ◽  
Cameron Hong ◽  
Lucas A. Rankin

Organogels have recently been considered as materials for transdermal drug delivery media, wherein their transport and mechanical properties are among the most important considerations. Transport through organogels has only recently been investigated and findings highlight an inextricable link between gels’ transport and mechanical properties based upon the formulated polymer concentration. Here, organogels composed of styrenic triblock copolymer and different aliphatic mineral oils, each with a unique dynamic viscosity, are characterized in terms of their quasi-static uniaxial mechanical behavior and the internal diffusion of two unique solute penetrants. Mechanical testing results indicate that variation of mineral oil viscosity does not affect gel mechanical behavior. This likely stems from negligible changes in the interactions between mineral oils and the block copolymer, which leads to consistent crosslinked network structure and chain entanglement (at a fixed polymer concentration). Conversely, results from diffusion experiments highlight that two penetrants—oleic acid (OA) and aggregated aerosol-OT (AOT)—diffuse through gels at a rate inversely proportional to mineral oil viscosity. The inverse dependence is theoretically supported by the hydrodynamic model of solute diffusion through gels. Collectively, our results show that organogel solvent variation can be used as a design parameter to tailor solute transport through gels while maintaining fixed mechanical properties.


Sign in / Sign up

Export Citation Format

Share Document