Analysis of the kinetics of interaction of two phases in a binary system. Method of calculation

1986 ◽  
Vol 29 (10) ◽  
pp. 823-826
Author(s):  
S. S. Borisov ◽  
Yu. I. Paskal'
2008 ◽  
Vol 72 (1) ◽  
pp. 385-388 ◽  
Author(s):  
L. Brinza ◽  
L. G. Benning ◽  
P. J. Statham

AbstractIn this paper, the kinetics of Mo and V (100 μM) uptake on ferrihydrite (FHY) were evaluated in batch, mono-sorbate systems at pH between 4 and 9, and in bi-sorbate systems in the presence of P (100 μM) at pH 7. In the Mo and V single-sorbate experiments, 100% adsorption was observed at pH values below 6 and 8, respectively. Above the point of zero charge (PZC = 7.97) of FHY, the adsorption efficiency for Mo dropped dramatically (20% at pH 8) while V showed high uptake efficiencies even at pH 9 (60% efficiency). The results from the bi-sorbate experiments (Mo-P and V-P) showed that at pH 7, P out-competed (97%) Mo for binding sites on FHY, while in the V-P binary system only ∼44% of the binding sites are occupied by P with the remaining sites being occupied by V.


1936 ◽  
Vol 14b (12) ◽  
pp. 430-443
Author(s):  
H. G. Littler

The kinetics of countercurrent towers absorbing a gas which obeys Henry's law have been worked out by a more rigid method than that used by Donnan and Masson (2). An equation is obtained which, unlike the Donnan and Masson formula, is the expression of a process which is thermodynamically irreversible. This is in accordance with the requirements of thermodynamics. The theoretical variation of the concentration of the soluble gas in the two phases throughout the tower is examined by means of the new equation.


2008 ◽  
Vol 277 ◽  
pp. 9-20 ◽  
Author(s):  
Yuri S. Kaganovsky ◽  
Lyudmila N. Paritskaya ◽  
V.V. Bogdanov

The kinetics of growth and lateral spreading of intermetallic layers during surface interdiffusion in Cu – Sn system has been studied in a temperature range 160 – 200oC by the methods of optical microscopy, SEM provided with X-ray microprobe, and AFM. Lateral phase spreading over the surface is characterized by competition between two phases: Cu6Sn5 and Cu3Sn. A steady state solution for concentration distribution on the surface of growing intermetallic phases, as well as kinetic equations of lateral spreading of growing phase layers have been obtained. By comparison of experimental data on intermetallic growth kinetics with the proposed theory, the dynamic surface diffusion coefficients have been calculated.


1947 ◽  
Vol 30 (4) ◽  
pp. 337-353 ◽  
Author(s):  
Alan W. Bernheimer

A study has been made of the kinetics of lysis induced by various hemolytic agents. The course of bemolysis was followed by mixing lysin with washed human erythrocytes, removing samples from the mixture, and estimating colorimetrically the hemoglobin in the supernatant fluid of the centrifuged samples. Most of the curves (but not all of them, e.g. tyrocidine) obtained by plotting degree of hemolysis against time, were S-shaped. The initiation of lysis by streptolysin S' was delayed, and in this property, streptolysin S' was similar to Cl. septicum hemolysin. None of the other lysins studied exhibited a long latent period preceding lysis. The maximum rate of hemoglobin liberation was found, in the range of lysin concentrations studied, to be a linear function of concentration when theta toxin of Cl. welchii, pneumolysin, tetanolysin, or streptolysin S' was the lytic agent. With comparable concentrations of saponin, sodium taurocholate, cetyl pyridinium chloride, tyrocidine, duponol C, lecithin-atrox venom mixture, or streptolysin O, the relation between rate and concentration was non-linear. The critical thermal increment associated with hemolysis was determined for systems containing pneumolysin, theta toxin, streptolysin S', streptolysin O, tetanolysin, and saponin. The findings concerning the effect of concentration and temperature on the rate of hemolysis provide a basis for classifying hemolytic agents (Tables I and II). Hemolysis induced by Cl. septicum hemolysin was found to be preceded by two phases: a phase of alteration of the erythrocytes and a phase involving swelling. Antihemolytic serum inhibited the first but not the second phase while sucrose inhibited the second but not the first phase.


Author(s):  
H. Jerbi ◽  
D. Nelias ◽  
M-C. Baietto

Blade-disk contact within high pressure compressor, is a high temperature fretting contact zone submitted to high stress levels. Therefore, it is important to estimate the various damages encountered in this area in order to correctly predict the lifetime of the parts. Coatings are used in order to improve the strength of the parts. In the framework of Innolub project, this study aims at developing a numerical model of coated contact accounting for wear and temperature. The objective is to estimate the kinetics of wear, to simulate worn surfaces and to allow the manufacturer to produce analyses of design with worn surfaces using a fast, efficient and reliable method of calculation.


Sign in / Sign up

Export Citation Format

Share Document