Results of investigating the physical and mechanical characteristics of hydraulic-fill fine-grained tailings

1981 ◽  
Vol 15 (10) ◽  
pp. 612-618
Author(s):  
B. A. Volnin ◽  
I. V. Pinalov
Keyword(s):  
Mechanical Characteristics ◽  
Hydraulic Fill ◽  
Fine Grained ◽  
Physical And Mechanical Characteristics

scholarly journals STUDY OF THE INFLUENCE OF FIBERS MADE OF DIFFERENT MATERIALS ON PHYSICO-MECHANICAL CHARACTERISTICS OF FINE-GRAINED CONCRETE

2020 ◽  
Vol 2018 (1) ◽  
pp. 115-118
Author(s):  
Al'bina Baranova ◽  
Margarita Badenikova ◽  
Anna Bobrova ◽  
Kristina Rudyh
Keyword(s):  
Mechanical Characteristics ◽  
Fine Grained ◽  
Physical And Mechanical Characteristics

The article presents the results of research of physical and mechanical characteristics of fine-grained concrete with different percentage of fiber made of different materials.

The Fiber-Reinforced Concrete Constructions Experimental Research

2018 ◽  
Vol 931 ◽  
pp. 598-602 ◽  
Author(s):  
Sergey V. Klyuev ◽  
Tolya A. Khezhev ◽  
Yu.V. Pukharenko ◽  
A.V. Klyuev
Keyword(s):  
Chemical Composition ◽  
Mechanical Characteristics ◽  
Steel Fiber ◽  
Fiber Reinforced Concrete ◽  
Steel Fibers ◽  
High Quality ◽  
Fine Grained ◽  
Fibre Concrete ◽  
Operational Characteristics ◽  
Physical And Mechanical Characteristics

The article proves the efficiency of the construction-based use of fibre concrete. The technique of high-quality fine-grained fibre concrete creation is presented. The chemical composition of the binder was studied and the physical and mechanical characteristics of the filler were revealed. 2 types of steel fibers were studied: anchor and in the form of a fir-tree. The conducted studies proved the effectiveness of dispersed reinforcement with steel fiber. It is established, that the usage of fiber in the form of a fir-tree the greatest increase of operational characteristics is reached.

Fiber Concrete on the Basis of Composite Binder and Technogenic Raw Materials

2018 ◽  
Vol 931 ◽  
pp. 603-607 ◽  
Author(s):  
Sergey V. Klyuev ◽  
Tolya A. Khezhev ◽  
Yu.V. Pukharenko ◽  
A.V. Klyuev
Keyword(s):  
Mechanical Characteristics ◽  
Raw Materials ◽  
Mining Waste ◽  
Composite Binder ◽  
Fine Grained ◽  
Fibre Concrete ◽  
Concrete Production ◽  
Fiber Concrete ◽  
Technogenic Raw Materials ◽  
Physical And Mechanical Characteristics

In the article the questions of application of the mining waste: dropout of quartzite sandstone crushing as filler in the fibre concrete production were considered. Composite binders based on cement and dropout of quartzite sandstone crushing were also developed. The effectiveness of composite binders’ usage consisting in improving the physical and mechanical characteristics and reduction of their prime cost compared to the cement with a slight increase in the complexity of their production was proved. The compositions of concrete dispersed reinforced with steel wave fiber and without it were developed. The efficiency of the use of dispersed reinforcement of fine-grained concrete is proved, which consists in improving the performance characteristics.

Experimental Study of Fiber-Reinforced Concrete Structures

2019 ◽  
Vol 945 ◽  
pp. 115-119 ◽  
Author(s):  
Sergey V. Klyuev ◽  
T.A. Khezhev ◽  
Yu.V. Pukharenko ◽  
A.V. Klyuev
Keyword(s):  
Experimental Study ◽  
Reinforced Concrete ◽  
Chemical Composition ◽  
Mechanical Characteristics ◽  
Steel Fibre ◽  
Fiber Reinforced Concrete ◽  
Reinforced Concrete Structures ◽  
Fine Grained ◽  
Fiber Concrete ◽  
Physical And Mechanical Characteristics

Acute questions of steelfiber using for disperse-reinforced fine-grained concrete are considered in the article. Researchers of steelfiber concrete patterns are held. The efficiency of using crushing dropout of quartzitic sandstone is proven. The article studies the physical and mechanical characteristics of the filler. The chemical composition of the binder is presented. For dispersed reinforcement of fine concrete the influence of steel fibre on the strength characteristics of the mixture was studied. The characteristics of the fiber and the technology of obtaining a fiber-concrete mixture are presented. Studies showed the effectiveness of steel fibre with a percentage of 3% and a cement-sand ratio of 1/3.

scholarly journals THE IMPACT OF PRESCRIPTION-TECHNOLOGICAL FACTORS ON PHYSICO-MECHANICAL CHARACTERISTICS OF FINE-GRAINED CONCRETE WITH THE CARBON PHASE

2016 ◽  
Vol 2 (1) ◽  
pp. 130-133
Author(s):  
Лопанов ◽  
Aleksandr Lopanov ◽  
Фанина ◽  
Evgeniya Fanina ◽  
Томаровщенко ◽  
...  
Keyword(s):  
Mechanical Characteristics ◽  
Cement Matrix ◽  
Carbon Phase ◽  
Cement Ratio ◽  
Technological Factors ◽  
Fine Grained ◽  
Cement Binder ◽  
The Impact ◽  
Physical And Mechanical Characteristics ◽  
Modifying Additive

The article presents the research results of physical and mechanical characteristics of carbon-containing resistive materials based on cement binder. The regulation limit of the compressive strength of the composites was carried out using mechanochemical methods. Synthesized modifying additive on the basis of ether polycarboxylates, salts of iron and of shungite to reduce water-cement ratio and permeability of conductive fine-grained concrete, as well as to improve the strength characteristics of the compositions. Studied the morphology of tumors in the cement matrix.

Activity Improvement of Sticky Portland Cements by Methods of Mechanical Activation

2019 ◽  
Vol 945 ◽  
pp. 3-8 ◽  
Author(s):  
A.V. Andreeva ◽  
O.N. Burenina ◽  
M.E. Savvinova
Keyword(s):  
Mechanical Activation ◽  
Ball Mill ◽  
Granulometric Composition ◽  
Mechanical Characteristics ◽  
Physical And Mechanical Properties ◽  
Surface Characteristics ◽  
Fine Grained ◽  
Wide Range ◽  
Grinding Machines ◽  
Physical And Mechanical Characteristics

The article presents experimental data on the improvement of physical and mechanical properties and structure of fine-grained concrete by mechanical activation of sticky cement in various apparatuses. It is established that the use of mechanoactivation technologies allows controlling the surface characteristics of cement in a wide range, its granulometric composition, as well as the physical and mechanical characteristics of concrete products. It is revealed that the efficiency of grinding machines that realize various mechanisms of disperse action is not the same. The highest indexes belong to the concrete containing cement, which is mechanically activated on the planetary ball mill AGO-2.

BENCH DESIGN AND STUDY OF PHYSICAL AND MECHANICAL CHARACTERISTICS OF A TEAT CUP LINER WITH ANTIBACTERIAL FILLER

2020 ◽  
pp. 22-26
Author(s):  
YURY G. IVANOV ◽  
◽  
YELENA V. MASHOSHINA ◽  
LYUDMILA N. VERLIKOVA ◽  
DARIA G. GELETIY ◽  
...  
Keyword(s):  
Mechanical Characteristics ◽  
Physical And Mechanical Characteristics

Discharge-pulse Geotechnical Electro Discharge Technology of Bases Strengthening

2020 ◽  
Vol 787 (12) ◽  
pp. 63-65
Author(s):  
N.S. Sokolov
Keyword(s):  
Bearing Capacity ◽  
Mechanical Characteristics ◽  
Discharge Pulse ◽  
Zero Values ◽  
Traditional Technologies ◽  
Negative Friction ◽  
Geotechnical Problems ◽  
Physical And Mechanical Characteristics

The problem of increasing the bearing capacity of the base is an relevant problem in modern geotechnical construction. When significant loads are transmitted to the base, the use of traditional technologies is not always justified. Often there is an urgent need to use non-standard ways to strengthen the bases. In many cases, the geotechnical situation is aggravated by the presence of weak underlying layers with unstable physical and mechanical characteristics in engineering-geological sections. When strengthening such bases with the help of traditional piles, the latter can get negative friction, which significantly reduces their bearing capacity on the ground, sometimes reaching zero values. This may lead to additional precipitations of the objects being constructed and constructed in the zone of geotechnical influence. The use of ERT piles in most cases successfully solves many complex geotechnical problems.

Promising hybrid fabrics based on carbon and aramid fibers as a reinforcing filler for polymer composites

2019 ◽  
pp. 86-95 ◽  
Author(s):  
G. F. Zhelezina ◽  
V. G. Bova ◽  
S. I. Voinov ◽  
A. Ch. Kan
Keyword(s):  
Composite Material ◽  
Polymer Composites ◽  
Carbon Fibers ◽  
Mechanical Characteristics ◽  
High Strength ◽  
High Modulus ◽  
Hybrid Composite Material ◽  
Hybrid Fabric ◽  
Reinforcing Filler ◽  
Physical And Mechanical Characteristics

The paper considers possibilities of using a hybrid fabric made of high-modulus carbon yarn brand ZhGV and high-strength aramid yarns brand Rusar-NT for polymer composites reinforcement. The results of studies of the physical and mechanical characteristics of hybrid composite material and values of the implementation of the strength and elasticity carbon fibers and aramid module for composite material are presented. 

Sign in / Sign up

Export Citation Format

Share Document