Experimental study on surface reactions of heavy metal ions with Quartz-Aqueous Ion concentration dependence

1999 ◽  
Vol 18 (3) ◽  
pp. 201-207 ◽  
Author(s):  
Wu Honghai ◽  
Wu Daqing ◽  
Peng Jinlian
Keyword(s):  
Heavy Metal ◽  
Experimental Study ◽  
Metal Ions ◽  
Concentration Dependence ◽  
Heavy Metal Ions ◽  
Surface Reactions ◽  
Ion Concentration

Separation of Heavy Metal Ions from the Solution Obtained by Leaching Low-Grade Pyrolusite with Pyrite and H2SO4

2013 ◽  
Vol 773 ◽  
pp. 283-288
Author(s):  
Xing Zou ◽  
Xiang Quan Chen ◽  
Hai Chao Xie ◽  
Xiao Dan Qiu
Keyword(s):  
Heavy Metal ◽  
Metal Ions ◽  
Heavy Metal Ions ◽  
Separation Efficiency ◽  
Ph Value ◽  
Sulfate Solution ◽  
Ion Concentration ◽  
Manganese Sulfate ◽  
Low Grade ◽  
High Concentration

The manganese sulfate solution leached from low-grade pyrolusite with pyrite and H2SO4 contains heavy metal ions of high concentration, influencing the quality of the final products of manganese compounds and causing manganese ions not to be electrolyzed. The present study was focused on the separation of Co, Ni and Zn ions from the leached solution with BaS. By controlling the pH value at 5.0-6.5, temperature at 50-60°C, reaction time at 15 min and mixing velocity at 78 rpm, the heavy metal ions could be separated effectively. Under the above optimized conditions, the ion concentration of Co, Ni, and Zn in the solution was reduced to 0.06 mg.L-1, 0.27mg.L-1 and 0.01mg.L-1, and the separation efficiency was 99.72%, 99.18% and 99.9% respectively. The obtained pure solution meets the demands of manganese electrowinning.

scholarly journals Insights into the Recent Use of Modified Adsorbents in Removing Heavy Metal Ions from Aqueous Solution

2021 ◽  
Vol 12 (2) ◽  
pp. 1884-1898
Keyword(s):  
Aqueous Solution ◽  
Heavy Metal ◽  
Metal Ions ◽  
Metal Ion ◽  
Heavy Metal Ions ◽  
Metal Removal ◽  
Low Cost ◽  
Ion Concentration ◽  
Future Research ◽  
Batch Tests

Natural water gets contaminated with heavy metal ions because of industrial effluents' discharge into the aquatic environment. As these heavy metal ions cause various health hazards, they should be removed from the aqueous solution. Heavy metal ion concentration in the aqueous solution is very less, so conventional metal removal and recovery processes cannot be applied here. The adsorption method is a great alternative to all these processes as it is a cost-effective and easy method. The use of natural, low-cost materials as adsorbents is eco-friendly also. However, metal uptake capacity of low-cost materials is very less. So, modification is required for low-cost materials to increase their efficiency. In the present review, different modification procedures adopted by different researchers have been discussed. Different low-cost materials used are sawdust, fruit and vegetable wastes, soil, minerals, etc. The modifying agents are heat, acids, bases, and other chemicals. Nevertheless, most of the studies are limited to batch tests only. Future research should be carried out on the extension of batch tests to column study for the large-scale treatment of contaminated water, and the cost of modification procedures and their impact on the environment should also be assessed.

Experimental Study of Heavy Metal Ions Removal from Oil Field Brine

2015 ◽  
Author(s):  
Maryam Seied Habashi ◽  
Mohammad Mehdi Zarei ◽  
Roberto Moreno-Atanasio
Keyword(s):  
Heavy Metal ◽  
Experimental Study ◽  
Metal Ions ◽  
Heavy Metal Ions ◽  
Oil Field ◽  
Heavy Metal Ions Removal ◽  
Metal Ions Removal

Removal of Heavy Metal Ions from Aqueous Solutions by Adsorption Using Modified Orange Peel as Adsorbent

2011 ◽  
Vol 236-238 ◽  
pp. 237-240 ◽  
Author(s):  
Xue Yi Guo ◽  
Sha Liang ◽  
Qing Hua Tian
Keyword(s):  
Heavy Metal ◽  
Metal Ions ◽  
Metal Ion ◽  
Heavy Metal Ions ◽  
Orange Peel ◽  
Ion Concentration ◽  
Adsorption Behaviors ◽  
Adsorption Processes ◽  
Effects Of Ph ◽  
Recycle And Reuse

In this study, orange peel (OP) was modified by KCl to prepare a novel orange peel adsorbent named as KOP. The adsorption behaviors of KOP for five heavy metals (Cu2+, Cd2+, Pb2+, Zn2+, Ni2+) were studied. The effects of pH, adsorption time and metal ion concentration on single heavy metal solution adsorption by KOP were investigated. All adsorption processes can attain equilibrium with 20min and kinetics data of five heavy metal ions were fitted to pseudo-second-equation; the maximum adsorption capacities for Cu2+, Cd2+, Pb2+, Zn2+and Ni2+were calculated as 59.77, 125.63, 141.84, 45.29 and 49.14 mg/g, respectively. Recycle and reuse experiments indicate that KOP could be used for more than 10 cycles. The effect of coexist metal ions on adsorption can be neglected.

scholarly journals Heavy Metal Ion Adsorption Properties of Methacrylamidocysteine-Containing Porous Poly(Hydroxyethyl Methacrylate) Chelating Beads

2002 ◽  
Vol 20 (7) ◽  
pp. 607-617 ◽  
Author(s):  
Adil Denizli ◽  
Bora Garipcan ◽  
Sibel Emir ◽  
Süleyman Patir ◽  
Ridvan Say
Keyword(s):  
Heavy Metal ◽  
Metal Ions ◽  
Metal Ion ◽  
Heavy Metal Ions ◽  
Metal Removal ◽  
Ph Value ◽  
Heavy Metal Removal ◽  
Ion Concentration ◽  
Heavy Metal Ion ◽  
Adsorption Capacities

Details of the adsorption performance of poly(2-hydroxyethylmethacrylate–methacrylamidocysteine) [p(HEMA–MAC)] beads towards the removal of heavy metal ions from aqueous solution were studied. The metal-complexing ligand and/or co-monomer MAC was newly synthesized from methylacrylochloride and cysteine. Spherical beads of average size 150–200 mm were obtained by the radical suspension polymerization of MAC and HEMA conducted in an aqueous dispersion. The p(HEMA–MAC) beads obtained had a specific surface area of 18.9 m2/g. p(HEMA–MAC) beads were characterized by swelling studies, FT-IR spectroscopy and elemental analysis. Such beads with a swelling ratio of 72%, and containing 3.9 mmol MAC/g, were used for heavy metal removal studies. The adsorption capacities of the beads for selected metal ions, i.e. CdII, AsIII, CrIII, HgII and PbII, were investigated in aqueous media containing different amounts of these ions (10–750 mg/l) and at different pH values (3.0–7.0). The adsorption rate was fast in all cases. The maximum adsorption capacities of the p(HEMA–MAC) beads were 1058.2 mg/g for CdII, 123.4 mg/g for AsIII, 199.6 mg/g for CrIII, 639.1 mg/g for PbII and 1018.6 mg/g for HgII. On a molar basis, the following affinity order was observed: CdII > HgII > CrIII > PbII >AsIII. The adsorption capacity of the MAC-incorporated beads was affected significantly by the pH value of the aqueous medium. The adsorption of heavy metal ions from artificial wastewater was also studied. In this case, the adsorption capacities were 52.2 mg/g for CdII, 23.1 mg/g for CrIII, 83.4 mg/g for HgII, 62.6 mg/g for PbII and 11.1 mg/g for AsIII at an initial metal ion concentration of 0.5 mmol/l. The chelating beads could be regenerated easily with a higher effectiveness by 0.1 M HNO3. These features make p(HEMA–MAC) beads potential candidates for heavy metal ion removal at high capacity.

scholarly journals Surface modified polythiophene/Al2O3 and polyaniline/Al2O3 nanocomposites using poly(vinyl alcohol) for the removal of heavy metal ions from water: kinetics, thermodynamic and isotherm studies

2021 ◽  
Author(s):  
Zeynab Karimi ◽  
Reza Khalili ◽  
Mohammad Ali Zazouli
Keyword(s):  
Heavy Metal ◽  
Metal Ions ◽  
Vinyl Alcohol ◽  
Metal Ion ◽  
Heavy Metal Ions ◽  
Adsorption Process ◽  
Oxidative Polymerization ◽  
Ion Concentration ◽  
Poly Vinyl Alcohol ◽  
Order Kinetic

Abstract In this study, polythiophene/Al2O3 (PTh/Al2O3) and polyaniline/Al2O3 (PAn/Al2O3) nanocomposites in the presence of poly(vinyl alcohol) (PVA) as the surfactant were synthesized via in situ chemical oxidative polymerization method in aqueous medium. The synthesized nanocomposites were characterized by Scanning electron microscopy (SEM), Fourier transform-infrared (FTIR) spectroscopy and X-ray diffraction (XRD). Results indicated that the Al2O3 and poly(vinyl alcohol) influenced the properties of synthesized nanocomposites. The aim of this research was to investigate the sorption characteristic of polythiophene and polyaniline nanocomposites for the removal of heavy metal cations including Pb(II), Zn(II) and Cd(II) from aqueous solution. The factors that affected the adsorption equilibrium as well as the removal efficiency of the nanoadsorbents, i.e., contact time, metal ion concentration, pH and adsorption conditions were investigated in detail. From the kinetic results, it was concluded that the pseudo-second-order kinetic model was found to the best at describing the adsorption process for Pb(II), Zn(II) and Cd(II) on PTh-PVA/Al2O3 and PAn-PVA/Al2O3. In addition, thermodynamic analysis suggests the endothermic and spontaneous nature of the present adsorption process with increased entropy on PTh-PVA/Al2O3 and PAn-PVA/Al2O3. The results suggest polythiophene, polyaniline and their nanocomposites have great potential to be used as efficient absorbent for the removal of heavy metal ions from water.

scholarly journals Effective removal of Cu(II) from aqueous solution using Acasia Arabica tree bark sustrate

2020 ◽  
pp. 97-104
Author(s):  
Gharde A. D. ◽  
Gharde B. D.
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Metal Ions ◽  
Metal Ion ◽  
Heavy Metal Ions ◽  
Ion Concentration ◽  
Tree Bark ◽  
Agricultural Activity ◽  
Aquatic Life ◽  
Geological Processes

This work reports the characterization of intensive industrial and agricultural activity is the basic reason of enormous pollution of the environment. Heavy metals generally occur in water in low concentration as a result of metal industries and partly through geological processes, but these cause direct toxicity both to human and other living beings. Due to their presence obeyed the specified limit. Heavy metals in wastewater has emerged as focus of environment remediation efforts of industrialization, urbanization with new technological advantages. The natural bodies of water are polluted by means of different contaminant like organic refractories, heavy metal ions etc. The significant concentration of some of the heavy metal ions in water are toxic to human being, animals as well as aquatic organisms. Some heavy metal ions even at the trace level has been recognized toxic to the public health. Many metals have been evaluated toxic to aquatic life certain to threshold toxicity level. The effect of tree bark for Cu(II) from copper sulphate on the metal content of industrial wastewater was investigated in the pH of 4-6. It is observed that the method of binding follows the first order adsorption rate expression such as effect of pH, agitation time, doses of bark substrate, initial metal ion concentration, effect of varying temperature were also studied.

Sign in / Sign up

Export Citation Format

Share Document