A Mathematical Model of Short-Circuiting Transfer in the High-Speed Oscillating MAG Process Development of Automatic MAG Welding Machine with Arc Sensor and its Application to Field Welding of Gas Pipelines

2004 ◽  
Vol 48 (7-8) ◽  
pp. 27-34 ◽  
Author(s):  
S. Kodama ◽  
Y. Ichiyama ◽  
Y. Ikuno ◽  
N. Baba
Keyword(s):  
Mathematical Model ◽  
High Speed ◽  
Process Development ◽  
Mag Welding ◽  
Gas Pipelines ◽  
Welding Machine ◽  
Arc Sensor

scholarly journals OPTIMIZATION OF PARAMETERS OF FAN UNITS OF AIR COOLING DEVICES

2021 ◽  
Vol 13 (3) ◽  
pp. 433-440
Author(s):  
Nikolay MAKAROV ◽  
◽  
Vladimir MAKAROV ◽  
Aleksandr UGOLNIKOV ◽  
Mikhail NOSYREV ◽  
...  
Keyword(s):  
Mathematical Model ◽  
Economic Efficiency ◽  
High Speed ◽  
Oil And Gas ◽  
Air Cooling ◽  
Gas Pipelines ◽  
Axial Fan ◽  
Compressed Gas ◽  
Cooling Devices ◽  
Specific Speed

Purpose of the study. Optimization of the parameters of high speed fan units of air coolers, the combination of which achieves the highest economic efficiency of fan units and, accordingly, the most rational range of specific speed values for the modes of maximum efficiency of fan units in combination with the relative diameter of the sleeve. Development of a mathematical model for determining the local values of the parameters of the efficiency of highspeed fan installations. Sustainable development of territories with active subsoil use is closely related to solving the problems of improving industrial safety and the efficiency of cooling the compressed gas at compressor stations of main gas pipelines, which actualizes the problem of mathematical modeling of energy conversion processes in the impellers of fan units of gas air coolers (AVO) to increase the competitiveness of the oil and gas complex RF in the context of globalization. Research methods. To optimize and determine the limiting combination of calculated parameters, the mathematical method of searching for the area of local maxima of a multiparameter problem in this part was performed in two stages: a mathematical model was built for determining the local values of the parameters that ensure the highest efficiency of fan installations with high speed; the most rational limiting combination of design parameters was determined, at which the highest economic efficiency of fan installations is achieved. Research results. The possibility of increasing the economic efficiency of axial fan units of high speed, made according to aerodynamic schemes with one impeller for gas air cooling devices, has been established. Using the mathematical analysis of the basic laws of axial turbomachines, equations for the efficiency of a fan unit and a fan are obtained, depending on the specific speed. Formulas are obtained for the maximum values of the efficiency of the fan and the fan unit of various specific speed depending on the coefficient of the consumpconsumption speed and on the relative diameter of the impeller sleeve. A method is proposed for constructing aerodynamic schemes of axial fan units for air-cooled gas coolers of the "K" type with maximum maximum values of efficiency for given values of specific speed, relative diameter of the impeller sleeve, aerodynamic quality of the impeller profiles, coefficient of aerodynamic resistance of the flow path of the coefficient of flow velocity. The possibility of creating a fan installation with a speed of ny ≥ 400 with an efficiency of at least ηy=0,86. Application area. Enterprises of the oil and gas complex of the Russian Federation for cooling compressed gas using AVO compressor stations of main gas pipelines.

Prediction of Surface Roughness in Compressed Air Jet Assisted High Speed End Milling of Silicon Using Diamond Coated Tools

2012 ◽  
Vol 576 ◽  
pp. 41-45
Author(s):  
A.K.M. Nurul Amin ◽  
M.A. Mahmud ◽  
M.D. Arif
Keyword(s):  
Mathematical Model ◽  
Surface Roughness ◽  
Surface Finish ◽  
High Speed ◽  
End Milling ◽  
Silicon Wafers ◽  
Compressed Air ◽  
Machining Parameters ◽  
High Quality ◽  
Ductile Mode

The majority of semiconductor devices are made up of silicon wafers. Manufacturing of high-quality silicon wafers includes numerous machining processes, including end milling. In order to end mill silicon to a nano-meteric surface finish, it is crucial to determine the effect of machining parameters, which influence the machining transition from brittle to ductile mode. Thus, this paper presents a novel experimental technique to study the effects of machining parameters in high speed end milling of silicon. The application of compressed air, in order to blow away the chips formed, is also investigated. The machining parameters’ ranges which facilitate the transition from brittle to ductile mode cutting as well as enable the attainment of high quality surface finish and integrity are identified. Mathematical model of the response parameter, the average surface roughness (Ra) is subsequently developed using RSM in terms of the machining parameters. The model was determined, by Analysis of Variance (ANOVA), to have a confidence level of 95%. The experimental results show that the developed mathematical model can effectively describe the performance indicators within the controlled limits of the factors that are being considered.

Research on the Performance Simulation of the Transmission System of Loader with Secondary Regulating Technique

2010 ◽  
Vol 426-427 ◽  
pp. 299-302
Author(s):  
Fa Ye Zang
Keyword(s):  
Mathematical Model ◽  
Fuzzy Control ◽  
Energy Saving ◽  
High Speed ◽  
Transmission System ◽  
Performance Simulation ◽  
Constant Torque ◽  
Braking Torque ◽  
The Mathematical Model ◽  
Inertial Energy

Based on deeply analyzing the working principles and energy-saving theory of loader secondary regulating transmission system, regenerating the transmission system’s inertial energy by controlling constant torque was put forward. Considering large changes of the parameters of the transmission system and its non-linearity, a fuzzy control was adopted to control the transmission system, and the mathematical model of the system was established, then the simulations of the performance of the transmission system has been conducted. The conclusion was made that the inertial energy can be reclaimed and reused in the system by the application of the secondary regulation technology, and braking by controlling constant torque is stable, it can ensure the security of braking at high speed and also permits changing the efficiency of recovery by changing the braking torque. The system’s power has been reduced and energy saving has been achieved.

SUBSTANTIATION OF OPTIMAL PARAMETERS AND DEVELOPMENT OF HIGH-TEMPERATURE STERILIZATION MODES FOR COMPOTE FROM PEARS IN HEATED AIR FLOW

2020 ◽  
Author(s):  
М.Э. Ахмедов ◽  
А.Ф. Демирова ◽  
Г.И. Касьянов ◽  
Ю.Ф. Росляков ◽  
М.М. Рахманова
Keyword(s):  
Mathematical Model ◽  
High Temperature ◽  
High Speed ◽  
Heat Transfer Fluid ◽  
Initial Product ◽  
Hot Air ◽  
Heated Air ◽  
Sterilization Process ◽  
Thermal Sterilization ◽  
Heat Carriers

Разработаны новые режимы стерилизации компота из груш в стеклотаре СКО 1-82-1000 с использованием высокотемпературных скоростных теплоносителей. Получена математическая модель расчета продолжительности процесса стерилизации в зависимости от параметров теплоносителя. Для получения математической модели использован метод математического планирования эксперимента. Предложен технологический прием ускоренной стерилизации компота из груш в стеклобанке объемом 1 дм3. Разработаны новые режимы тепловой обработки (стерилизации) компота из груш в стеклобанке 1-82-1000 при различных параметрах горячего воздуха и разных начальных температурах продукта, °С: 70, 80, 85 и 90. Наименьшая продолжительность процесса тепловой стерилизации достигнута при скорости теплоносителя 7,5 м/с при начальной температуре продукта 90°С. New modes of sterilization of compote from pears in glass containers of SKO 1-82-1000 using high-temperature high-speed heat carriers have been developed. A mathematical model for calculating the duration of the sterilization process depending on the parameters of the heat carrier is obtained. To obtain a mathematical model, we used the method of mathematical planning of the experiment. A technological method for accelerated sterilization of pear compote in a glass jar with a volume of 1 dm3 is proposed. The research made it possible to develop new modes of heat treatment (sterilization) of compote from pears in a glass jar 1-82-1000 at different parameters of hot air and different initial temperatures of the product, °C: 70, 80, 85 and 90. The shortest duration of the thermal sterilization process is achieved at the heat transfer fluid speed of 7,5 m/s at the initial product temperature of 90°C.

Increasing the mobility of a high-speed tracked vehicle based on a controlled skid algorithm

2020 ◽  
pp. 29-33
Author(s):  
S. V. Kondakov ◽  
O.O. Pavlovskaya ◽  
I.D. Ivanov ◽  
A.R. Ishbulatov
Keyword(s):  
Mathematical Model ◽  
Dynamic Stability ◽  
Simulation Modeling ◽  
Automatic System ◽  
High Speed ◽  
Control Algorithm ◽  
Loss Of Stability ◽  
Tracked Vehicle ◽  
Hydrostatic Transmission ◽  
The Mathematical Model

A method for controlling the curvilinear movement of a high-speed tracked vehicle in a skid without loss of stability is proposed. The mathematical model of the vehicle is refined. With the help of simulation modeling, a control algorithm is worked out when driving in a skid. The effectiveness of vehicle steering at high speed outside the skid is shown. Keywords: controlled skid, dynamic stability, steering pole displacement, hydrostatic transmission, automatic system, fuel supply. [email protected]

Sign in / Sign up

Export Citation Format

Share Document