Construction of biological flame retardant layer on cotton fabric via photografting of nucleotide/amino acid monomers

As far as the value addition of textile is concerned, flame retardancy of textile materials is considered to be one of the most important properties in textile finishing by both industries as well as academic researchers. Flame-retardant property with thermal stability was imparted to cotton by using green coconut ( Cocos nucifera Linn) shell extract, a natural waste source of coconut. Coconut shell extract was analyzed by high-performance liquid chromatography, Fourier transform infrared spectroscopy, energy-dispersive spectrometry and its phytochemical analysis was also carried out. The coconut shell extract (acidic after extraction) was applied in three different pH (acidic, neutral, and alkaline) conditions to the cotton fabric. Flame-retardant properties of the untreated and the treated cotton fabrics were analyzed by limiting oxygen index and vertical flammability. The study showed that all the treated fabrics had good flame resistance property compared to that of the untreated fabric. The limiting oxygen index value was found to increase by 72.2% after application of the coconut shell extract from alkaline pH. Pyrolysis and char formation behavior of the concerned fabrics were studied using thermogravimetric analysis and differential scanning calorimetric analysis in a nitrogen atmosphere. The physicochemical composition of the untreated and coconut shell extract treated cotton fabrics were analyzed by attenuated total reflection–Fourier transform infrared, scanning electron microscope, and energy-dispersive X-ray spectroscopy. Also, treated cotton fabric showed natural brown color and antibacterial property against both Gram-positive and Gram-negative bacteria. The durability of the flame-retardant functionality to washing with soap solution has also been studied and reported in this paper.

Download Full-text

Layer-by-layer Assembly Polyethylenimine/phytic Acid Coating With Gradient Structure for High-Efficiency and Durable Flame Retardant Cotton Fabric With Good Physical and Mechanical Properties

10.21203/rs.3.rs-697928/v1 ◽

2021 ◽

Author(s):

Xinhua Liu ◽

Hailong Liu ◽

Yinchun Fang

Keyword(s):

Physical Properties ◽

Flame Retardant ◽

Cotton Fabric ◽

High Efficiency ◽

Cotton Fabrics ◽

Gradient Structure ◽

Layer By Layer ◽

Assembly Method ◽

Lbl Assembly ◽

Coated Cotton

Abstract In this study, intumescent flame retardant coating of polyethylenimine/phytic acid (PEI/PA) with gradient structure was constructed on cotton fabric through facile layer-by-layer (LBL) assembly method. The LOI value of coated cotton fabric reached over 40% indicating excellent flame retardancy. Reasonable controlling the LBL assembly process of PEI/PA coating brought less influence to the physical properties of cotton fabrics. And the coated cotton fabric revealed good flame retardant washing durability. Thermogravimetric analysis results of coated cotton fabrics showed that PEI/PA flame retardant coating changed the thermal decomposition process and promoted char formation revealing the obviously condensed phase flame retardant action. SEM images of char residues revealed that PEI/PA flame retardant coating promoted to form the intumescent flame retardant (IFR) char layer showing obvious IFR action. This research provides novel strategy for the development of high-efficiency flame retardant cotton fabric with good durability and physical properties using simple LBL assembly method.

Download Full-text

Application of Plasma Activation in Flame-Retardant Treatment for Cotton Fabric

Polymers ◽

10.3390/polym12071575 ◽

2020 ◽

Vol 12 (7) ◽

pp. 1575

Author(s):

Huong Nguyen Thi ◽

Khanh Vu Thi Hong ◽

Thanh Ngo Ha ◽

Duy-Nam Phan

Keyword(s):

Tensile Strength ◽

Mechanical Strength ◽

Flame Retardant ◽

Cotton Fabric ◽

Photoelectron Spectroscopy ◽

Curing Temperature ◽

Sem Images ◽

Limiting Oxygen Index ◽

Xps Spectra ◽

Plasma Activation

Cotton fabric treated by Pyrovatex CP New (PCN) and Knittex FFRC (K-FFRC) using the Pad-dry-cure method showed an excellent fire-retardant effect. However, it needed to be cured at high temperatures for a long time leading to a high loss of mechanical strength. In this study, atmospheric-pressure dielectric barrier discharge (APDBD) plasma was applied to the cotton fabric, which then was treated by flame retardants (FRs) using the pad–dry-cure method. The purpose was to have a flame-retardant cotton fabric (limiting oxygen index (LOI) ≥ 25) and a mechanical loss of the treated fabric due to the curing step as low as possible. To achieve this goal, 10 experiments were performed. The vertical flammability characteristics, LOI value and tensile strength of the treated fabrics were measured. A response model between the LOI values of the treated fabric and two studied variables (temperature and time of the curing step) was found. It was predicted that the optimal temperature and time-to-cure to achieve LOI of 25 was at 160 °C for 90 s, while the flame-retardant treatment process without plasma pretreatment, was at 180 °C and 114 s. Although the curing temperature and the time have decreased significantly, the loss of mechanical strength of the treated fabric is still high. The tensile strength and scanning electron microscopy (SEM) images of the fabric after plasma activation show that the plasma treatment itself also damages the mechanical strength of the fabric. X-ray photoelectron spectroscopy (XPS) spectra of the fabric after plasma activation and energy-dispersive spectroscopy (EDS) analysis of the flame retardant-treated (FRT) fabric clarified the role of plasma activation in this study.

Download Full-text