scholarly journals Filter made of cuprammonium regenerated cellulose for virus removal: a mini-review

Cellulose ◽  
2021 ◽  
Author(s):  
Shoichi Ide

AbstractIn 1989, Asahi Kasei commercialized a porous hollow fiber membrane filter (Planova™) made of cuprammonium regenerated cellulose, making it possible for the first time in the world to “remove viruses from protein solutions by membrane filtration”. Planova has demonstrated its usefulness in separating proteins and viruses. Filters that remove viruses from protein solutions, i.e., virus removal filters (VFs), have become one of the critical modern technologies to assure viral safety of biological products. It has also become an indispensable technology for the future. The performance characteristics of VFs can be summarized in two points: 1) the virus removal performance increases as the virus diameter increases, and 2) the recovery rate of proteins with molecular weights greater than 10,000 exceeds the practical level. This paper outlines the emergence of VF and its essential roles in the purification process of biological products, requirements for VF, phase separation studies for cuprammonium cellulose solution, comparison between Planova and other regenerated cellulose flat membranes made from other cellulose solutions, and the development of Planova. The superior properties of Planova can be attributed to its highly interconnected three-dimensional network structure. Furthermore, future trends in the VF field, the subject of this review, are discussed.

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Miku Ayano ◽  
Yoshiyuki Sawamura ◽  
Tomoko Hongo-Hirasaki ◽  
Takayuki Nishizaka

AbstractVirus removal filters developed for the decontamination of small viruses from biotherapeutic products are widely used in basic research and critical step for drug production due to their long-established quality and robust performance. A variety of imaging techniques have been employed to elucidate the mechanism(s) by which viruses are effectively captured by filter membranes, but they are limited to ‘static’ imaging. Here, we propose a novel method for detailed monitoring of ‘dynamic process’ of virus capture; specifically, direct examination of biomolecules during filtration under an ultra-stable optical microscope. Samples were fluorescently labeled and infused into a single hollow fiber membrane comprising cuprammonium regenerated-cellulose (Planova 20N). While proteins were able to pass through the membrane, virus-like particles (VLP) accumulated stably in a defined region of the membrane. After injecting the small amount of sample into the fiber membrane, the real-time process of trapping VLP in the membrane was quantified beyond the diffraction limit. The method presented here serves as a preliminary basis for determining optimum filtration conditions, and provides new insights into the structure of novel fiber membranes.


1989 ◽  
Vol 21 (3) ◽  
pp. 99-104 ◽  
Author(s):  
J. I. Oragui ◽  
D. D. Mara ◽  
S. A. Silva ◽  
A. M. Konig

Rotaviruses are generally excreted in large numbers in diarrhoeal stools, but in wastewaters their numbers are subject to variations. Detection and enumeration of these viruses involve a concentration step followed by an assay method. Enumeration in wastewater concentrates is complicated by the presence of toxic substances which are often concentrated with the viruses. These toxic substances often cause the destruction of cells during rotavirus assay, thus leading to underestimation of viral numbers. Such concentrates were detoxified by a simple and effective method using polyacrylamide (Biogel P-6DG) or dextran (Sephadex G50) beads. Concentrates (10 ml) were mixed with 0.5 g gel and the mixtures were allowed to stand for 2 h at room temperature during which time the beads swell by the passage of water into them along with inorganic ions and substances with molecular weights of less than 30,000. The supernatants were then decontaminated with antibiotics and assayed for rotaviruses by the indirect immunofluorescent technique. Most untreated ultrafiltrates of raw sewage and those from anaerobic ponds were found to be too toxic to MA104 and LLC MK2 cells, whereas the above treatment rendered over 90% of wastewater concentrates non-toxic to cells. This technique was used to study virus removal in samples from deep waste stabilization ponds in northeast Brazil.


2021 ◽  
Author(s):  
Mohd Nor Faiz Norrrahim ◽  
Noor Azilah Mohd Kasim ◽  
Victor Feizal Knight ◽  
Keat Khim Ong ◽  
Siti Aminah Mohd Noor ◽  
...  

Abstract Wide availability and diversity of dangerous microbes poses a considerable problem for health professionals and in the development of new healthcare products. Numerous studies have been conducted to develop membrane filters that have antibacterial properties to solve this problem. Without proper protective filter equipment, healthcare providers, essential workers, and the general public are exposed to the risk of infection. A combination of nanotechnology and biosorption is expected to offer a new and greener approach to improve the usefulness of polysaccharides as an advanced membrane filtration material. Nanocellulose is among the emerging materials of this century and several studies had proven its usefulness in filtering microbes. Its high specific surface area enables the adsorption of various microbial species, and its innate porosity can separate various molecules and retain microbial objects. Besides that, the presence of an abundant OH groups in nanocellulose allows its surface modification which can increase its filtration efficiency through the formation of affinity interactions toward microbes. In this review, an update of the most relevant uses of nanocellulose as a new class of membrane filters against microbes is outlined. Key advancements in surface modifications of nanocellulose to enhance its rejection mechanism is also critically discussed. To the best of our knowledge, this is the first review focusing on the development of nanocellulose as a membrane filter against microbes.


2017 ◽  
Vol 9 (2) ◽  
pp. 204-208 ◽  
Author(s):  
Emre SEVİNDİK

RuBisCO is an important enzyme for plants to photosynthesize and balance carbon dioxide in the atmosphere. This study aimed to perform sequence, physicochemical, phylogenetic and 3D (three-dimensional) comparative analyses of RuBisCO proteins in the Carthamus ssp. using various bioinformatics tools. The sequence lengths of the RuBisCO proteins were between 166 and 477 amino acids, with an average length of 411.8 amino acids. Their molecular weights (Mw) ranged from 18711.47 to 52843.09 Da; the most acidic and basic protein sequences were detected in C. tinctorius (pI = 5.99) and in C. tenuis (pI = 6.92), respectively. The extinction coefficients of RuBisCO proteins at 280 nm ranged from 17,670 to 69,830 M-1 cm-1, the instability index (II) values for RuBisCO proteins ranged from 33.31 to 39.39, while the GRAVY values of RuBisCO proteins ranged from -0.313 to -0.250. The most abundant amino acid in the RuBisCO protein was Gly (9.7%), while the least amino acid ratio was Trp (1.6 %). The putative phosphorylation sites of RuBisCO proteins were determined by NetPhos 2.0. Phylogenetic analysis revealed that RuBisCO proteins formed two main clades. A RAMPAGE analysis revealed that 96.3%-97.6% of residues were located in the favoured region of RuBisCO proteins. To predict the three dimensional (3D) structure of the RuBisCO proteins PyMOL was used. The results of the current study provide insights into fundamental characteristic of RuBisCO proteins in Carthamus ssp.


2020 ◽  
Vol 12 (6) ◽  
pp. 2207
Author(s):  
Benjamin Lukitsch ◽  
Paul Ecker ◽  
Martin Elenkov ◽  
Christoph Janeczek ◽  
Bahram Haddadi ◽  
...  

Computational fluid dynamics (CFD) provides a flexible tool for investigation of separation processes within membrane hollow fiber modules. By enabling a three-dimensional and time dependent description of the corresponding transport phenomena, very detailed information about mass transfer or geometrical influences can be provided. The high level of detail comes with high computational costs, especially since species transport simulations must discretize and resolve steep gradients in the concentration polarization layer at the membrane. In contrast, flow simulations are not required to resolve these gradients. Hence, there is a large gap in the scale and complexity of computationally feasible geometries when comparing flow and species transport simulations. A method, which tries to cover the mentioned gap, is presented in the present article. It allows upscaling of the findings of species transport simulations, conducted for reduced geometries, on the geometrical scales of flow simulations. Consequently, total transmembrane transport of complete modules can be numerically predicted. The upscaling method does not require any empirical correlation to incorporate geometrical characteristics but solely depends on results acquired by CFD flow simulations. In the scope of this research, the proposed method is explained, conducted, and validated. This is done by the example of CO2 removal in a prototype hollow fiber membrane oxygenator.


1983 ◽  
Vol 46 (9) ◽  
pp. 783-786 ◽  
Author(s):  
PHYLLIS ENTIS ◽  
PETER BOLESZCZUK

A method was developed for direct enumeration of Vibrio parahaemolyticus in foods by hydrophobic grid membrane filter. The method consisted of a 4–5 h resuscitation step to recover injured cells, followed by overnight incubation at 42°C on V. parahaemolyticus Sucrose (VPS) agar, a new selective and differential medium. The confirmation rate of typical colonies on VPS agar was greater than 98%. The new method produced significantly higher counts of V. parahaemolyticus than the FDA method (P<0.01) when tested with chill-, freeze- or heat-stressed samples, and was equivalent to the FDA method (P>0.05) for recovery of osmotically stressed V. parahaemolyticus.


Sign in / Sign up

Export Citation Format

Share Document