Sensitivity of damage to microstructure evolution occurring during long-term high-temperature annealing in a semi-crystalline polymer

2007 ◽  
Vol 42 (18) ◽  
pp. 7850-7860 ◽  
Author(s):  
Sylvie Castagnet ◽  
David Girard
Keyword(s):  
High Temperature ◽  
Microstructure Evolution ◽  
Crystalline Polymer ◽  
High Temperature Annealing

Microstructure evolution of a ZrC coating layer in TRISO particles during high-temperature annealing

2016 ◽  
Vol 479 ◽  
pp. 93-99 ◽  
Author(s):  
Daejong Kim ◽  
Young Bum Chun ◽  
Myeong Jin Ko ◽  
Hyeon-Geun Lee ◽  
Moon-Sung Cho ◽  
...  
Keyword(s):  
High Temperature ◽  
Microstructure Evolution ◽  
Coating Layer ◽  
High Temperature Annealing ◽  
Triso Particles ◽  
Zrc Coating

Influence of High Temperature Annealing on Microstructure Evolution of Ni-24Fe-14Cr-8Mo Superalloy

2021 ◽  
Vol 904 ◽  
pp. 117-123
Author(s):  
Yi Cui ◽  
Yun Fei Zhang ◽  
Yan Guang Han ◽  
Da Lv
Keyword(s):  
High Temperature ◽  
Microstructure Evolution ◽  
Testing Machine ◽  
Aging Treatment ◽  
Growth Patterns ◽  
High Temperature Annealing ◽  
Rockwell Hardness ◽  
Hardness Testing ◽  
X Ray Diffraction ◽  
X Ray

The effect of high temperature annealing on microstructure evolution of Ni-24Fe-14Cr-8Mo alloy was investigated through Optical Microscopy (OM), Scanning Electron Microscopy (SEM), X-Ray Diffraction (XRD) and Rockwell Hardness Testing Machine. Three kinds of grain growth patterns were found at different annealing temperatures due to carbides precipitation and dissolution. After a combination of high temperature annealing and aging treatment, the hardness versus time curves performed a parabolic pattern. The highest hardness was achieved under 1070°C/60 minutes treatment, and the desirable annealing time should be 60 minutes to 90 minutes.

Microstructure Evolution and Mechanical Properties of HR3C Steel during Long-term Aging at High Temperature

2014 ◽  
Vol 21 (8) ◽  
pp. 765-773 ◽  
Author(s):  
Bin Wang ◽  
Zheng-dong Liu ◽  
Shi-chang Cheng ◽  
Chun-ming Liu ◽  
Jing-zhong Wang
Keyword(s):  
Mechanical Properties ◽  
High Temperature ◽  
Microstructure Evolution

Microstructural characterization of a rapidly solidified Al-Fe-V-Si alloy for elevated temperature applications

1988 ◽  
Vol 46 ◽  
pp. 550-551
Author(s):  
R. E. Franck ◽  
J. A. Hawk ◽  
G. J. Shiflet
Keyword(s):  
High Temperature ◽  
Elevated Temperature ◽  
Grain Growth ◽  
Volume Fraction ◽  
Microstructural Characterization ◽  
Second Phase ◽  
Microstructural Stability ◽  
Elevated Temperature Strength ◽  
Temperature Applications

Rapid solidification processing (RSP) is one method of producing high strength aluminum alloys for elevated temperature applications. Allied-Signal, Inc. has produced an Al-12.4 Fe-1.2 V-2.3 Si (composition in wt pct) alloy which possesses good microstructural stability up to 425°C. This alloy contains a high volume fraction (37 v/o) of fine nearly spherical, α-Al12(Fe, V)3Si dispersoids. The improved elevated temperature strength and stability of this alloy is due to the slower dispersoid coarsening rate of the silicide particles. Additionally, the high v/o of second phase particles should inhibit recrystallization and grain growth, and thus reduce any loss in strength due to long term, high temperature annealing.The focus of this research is to investigate microstructural changes induced by long term, high temperature static annealing heat-treatments. Annealing treatments for up to 1000 hours were carried out on this alloy at 500°C, 550°C and 600°C. Particle coarsening and/or recrystallization and grain growth would be accelerated in these temperature regimes.

Defect reduction in oxygen implanted silicon-on-insulator material during high-temperature annealing

1989 ◽  
Vol 47 ◽  
pp. 604-605
Author(s):  
P. Roitman ◽  
B. Cordts ◽  
S. Visitserngtrakul ◽  
S.J. Krause
Keyword(s):  
High Temperature ◽  
Annealing Temperature ◽  
Silicon On Insulator ◽  
High Dose ◽  
High Temperature Annealing ◽  
High Current ◽  
Defect Reduction ◽  
Annealing Step ◽  
Multiple Cycle ◽  
Defect Densities

Synthesis of a thin, buried dielectric layer to form a silicon-on-insulator (SOI) material by high dose oxygen implantation (SIMOX – Separation by IMplanted Oxygen) is becoming an important technology due to the advent of high current (200 mA) oxygen implanters. Recently, reductions in defect densities from 109 cm−2 down to 107 cm−2 or less have been reported. They were achieved with a final high temperature annealing step (1300°C – 1400°C) in conjunction with: a) high temperature implantation or; b) channeling implantation or; c) multiple cycle implantation. However, the processes and conditions for reduction and elimination of precipitates and defects during high temperature annealing are not well understood. In this work we have studied the effect of annealing temperature on defect and precipitate reduction for SIMOX samples which were processed first with high temperature, high current implantation followed by high temperature annealing.

FERROPERM

Alloy Digest ◽  
1993 ◽  
Vol 42 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Temperature ◽  
Physical Properties ◽  
Saturation Magnetization ◽  
Pure Iron ◽  
Magnetic Alloy ◽  
High Saturation Magnetization ◽  
High Temperature Annealing ◽  
Soft Magnetic ◽  
Soft Magnetic Alloy

Abstract Ferroperm is a soft magnetic alloy that contains 1% aluminum. This addition of aluminum combined with high-temperature annealing increases permeability and reduces coercivity without decreasing the high-saturation magnetization of pure iron. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming. Filing Code: FE-99. Producer or source: NKK Corporation.

KUBOTA KNC-03

Alloy Digest ◽  
2010 ◽  
Vol 59 (1) ◽  
Keyword(s):  
Compressive Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Temperature Performance ◽  
Resistance To Oxidation

Abstract Kubota KNC-03 is a grade with a combination of high strength and excellent resistance to oxidation. These properties make this alloy suitable for long-term service at temperature up to 1250 deg C (2282 deg F). This datasheet provides information on physical properties, hardness, elasticity, tensile properties, and compressive strength as well as creep. It also includes information on high temperature performance as well as casting and joining. Filing Code: Ni-676. Producer or source: Kubota Metal Corporation, Fahramet Division. See also Alloy Digest Ni-662, April 2008.

Sign in / Sign up

Export Citation Format

Share Document