Modern biomaterials: a review—bulk properties and implications of surface modifications

2007 ◽  
Vol 18 (7) ◽  
pp. 1263-1277 ◽  
Author(s):  
Paul Roach ◽  
David Eglin ◽  
Kirsty Rohde ◽  
Carole C. Perry
Molecules ◽  
2021 ◽  
Vol 26 (4) ◽  
pp. 992
Author(s):  
Raasti Naseem ◽  
Charalampos Tzivelekis ◽  
Matthew J. German ◽  
Piergiorgio Gentile ◽  
Ana M. Ferreira ◽  
...  

Polyester-based materials are established options, regarding the manufacturing of bone fixation devices and devices in routine clinical use. This paper reviews the approaches researchers have taken to develop these materials to improve their mechanical and biological performances. Polymer blending, copolymerisation, and the use of particulates and fibre bioceramic materials to make composite materials and surface modifications have all been studied. Polymer blending, copolymerisation, and particulate composite approaches have been adopted commercially, with the primary focus on influencing the in vivo degradation rate. There are emerging opportunities in novel polymer blends and nanoscale particulate systems, to tune bulk properties, and, in terms of surface functionalisation, to optimise the initial interaction of devices with the implanted environment, offering the potential to improve the clinical performances of fracture fixation devices.


RSC Advances ◽  
2020 ◽  
Vol 10 (15) ◽  
pp. 8982-8988 ◽  
Author(s):  
Kyle G. Reeves ◽  
Damien Dambournet ◽  
Christel Laberty-Robert ◽  
Rodolphe Vuilleumier ◽  
Mathieu Salanne

Chemical doping and other surface modifications have been used to engineer the bulk properties of materials, but their influence on the surface structure and consequently the surface chemistry are often unknown.


Metals ◽  
2020 ◽  
Vol 10 (8) ◽  
pp. 1015 ◽  
Author(s):  
Annalisa Acquesta ◽  
Tullio Monetta

Machined devices made of titanium or titanium alloys are widely used in biomedical applications. Recently, additive manufacturing technologies (AM) were proposed to reduce the cost of parts and customise their shape. While several researchers have studied the characterisation of the machined surfaces of AM products, less attention has been focused on the study of the surfaces of as-produced parts. The aim of this study was to compare the surface and bulk properties of Ti-6Al-4V alloy products obtained using two types of AM—i.e., electron beam melting and direct metal laser sintering—in comparison to the wrought material and analyse their metallographic, crystallographic, topographic, and electrochemical properties. The metallographic and crystallographic, as well as topographic, analysis showed different microstructures and surface area extensions between the tested specimens. Potentiodynamic polarisation tests highlighted the complex electrochemical behaviour of additively manufactured parts if compared to that of the traditionally fabricated ones. The tests performed on mechanically polished parts underlined similar electrochemical performance between them, even if the additive manufactured ones exhibited a certain instability. Although the as-produced additive manufactured parts present exciting surface shapes, useful in the biomedical field, significant drawbacks remain. A more in-depth study of the device surface modifications, to improve their electrochemical behaviour, is needed.


Author(s):  
George Price ◽  
Lizardo Cerezo

Ultrastructural defects of ciliary structure have been known to cause recurrent sino-respiratory infection concurrent with Kartagener's syndrome. (1,2,3) These defects are also known to cause infertility in both males and females. (4) Overall, the defects are defined as the Immotile, or Dyskinetic Cilia Syndrome (DCS). Several ultrastructural findings have been described, including decreased number of cilia, multidirection orientation, fused and compound cilia, membrane blebs, excess matrix in the axoneme, missing outer tubular doublets, translocated doublets, defective radial spokes and dynein arms. A rare but noteworthy ultrastructural finding in DCS is the predominance of microvilli-like structures on the luminal surface of the respiratory epithelium. (5,6) These permanent surface modifications of the apical respiratory epithelium no longer resemble cilia but reflect the ultrastructure of stereocilia, similar to that found in the epidydimal epithelium. Like microvilli, stereocilia are devoid of microtubular ultrastructure in comparison with true cilia.


1991 ◽  
Vol 223 ◽  
Author(s):  
Neeta Agrawal ◽  
R. D. Tarey ◽  
K. L. Chopra

ABSTRACTArgon plasma exposure has been used to induce surface chemical modification of aluminium thin films, causing a drastic change in etch rate in standard HNO3/CH3COOH/H3PO4 etchant. The inhibition period was found to increase with power and Ar plasma exposure time. Auger electron and x-ray photoelectron spectroscopies have indicated formation of an aluminium fluoride (AlF3) surface layer due to fluorine contamination originating from the residue left in the plasma chamber during CF4 processing. The high etch selectivity between unexposed and argon plasma exposed regions has been exploited as a new technique for resistless patterning of aluminium.


2003 ◽  
Vol 775 ◽  
Author(s):  
Byeongchan Lee ◽  
Kyeongjae Cho

AbstractWe investigate the surface kinetics of Pt using the extended embedded-atom method, an extension of the embedded-atom method with additional degrees of freedom to include the nonbulk data from lower-coordinated systems as well as the bulk properties. The surface energies of the clean Pt (111) and Pt (100) surfaces are found to be 0.13 eV and 0.147 eV respectively, in excellent agreement with experiment. The Pt on Pt (111) adatom diffusion barrier is found to be 0.38 eV and predicted to be strongly strain-dependent, indicating that, in the compressive domain, adatoms are unstable and the diffusion barrier is lower; the nucleation occurs in the tensile domain. In addition, the dissociation barrier from the dimer configuration is found to be 0.82 eV. Therefore, we expect that atoms, once coalesced, are unlikely to dissociate into single adatoms. This essentially tells that by changing the applied strain, we can control the patterning of nanostructures on the metal surface.


Sign in / Sign up

Export Citation Format

Share Document