Correlation of in vitro and in vivo results of vacuum plasma sprayed titanium implants with different surface topography

2007 ◽  
Vol 19 (3) ◽  
pp. 1117-1125 ◽  
Author(s):  
Stefan Endres ◽  
Monika Wilke ◽  
Peter Knöll ◽  
Holger Frank ◽  
Marita Kratz ◽  
...  
Keyword(s):  
Surface Topography ◽  
Titanium Implants ◽  
Vacuum Plasma ◽  
Plasma Sprayed

scholarly journals Impact of surface topography and coating on osteogenesis and bacterial attachment on titanium implants

2018 ◽  
Vol 9 ◽  
pp. 204173141879069 ◽  
Author(s):  
Laila Damiati ◽  
Marcus G Eales ◽  
Angela H Nobbs ◽  
Bo Su ◽  
Penelope M Tsimbouri ◽  
...  
Keyword(s):  
Surface Topography ◽  
Dental Implants ◽  
Antimicrobial Properties ◽  
Bacterial Attachment ◽  
Titanium Implants ◽  
Premature Failure ◽  
Biological Environment ◽  
The Impact

Titanium (Ti) plays a predominant role as the material of choice in orthopaedic and dental implants. Despite the majority of Ti implants having long-term success, premature failure due to unsuccessful osseointegration leading to aseptic loosening is still too common. Recently, surface topography modification and biological/non-biological coatings have been integrated into orthopaedic/dental implants in order to mimic the surrounding biological environment as well as reduce the inflammation/infection that may occur. In this review, we summarize the impact of various Ti coatings on cell behaviour both in vivo and in vitro. First, we focus on the Ti surface properties and their effects on osteogenesis and then on bacterial adhesion and viability. We conclude from the current literature that surface modification of Ti implants can be generated that offer both osteoinductive and antimicrobial properties.

Cytotoxicity and Adhesion Evaluation of Nanothickness Ca/P-Based Bioceramics Coated Titanium

2008 ◽  
Vol 396-398 ◽  
pp. 319-322
Author(s):  
Caroline M. Ramirez ◽  
Paulo Guilherme Coelho ◽  
José Mauro Granjeiro
Keyword(s):  
Cell Adhesion ◽  
Surface Topography ◽  
Dental Implants ◽  
Biological Response ◽  
Biological Evaluation ◽  
Titanium Implants ◽  
3T3 Fibroblasts ◽  
Plasma Sprayed ◽  
Effect Of Surface

Incorporation of bioceramics on the surface of dental implants has been utilized in an attempt to increase biological response of bone to materials. This paper reports the in vitro biological evaluation of Ca/P-based nanothickness bioceramic coated alumina-blasted/acid-etched titanium implants (AB/AE nanotite implant) and compare its performance to the untreated and uncoated implants, Ca/P-based nanothickness bioceramic coated untreated implants (untreated nanotite implant), alumina-blasted/acid-etched titanium implants (AB/AE implant) and hydroxyapatite plasma-sprayed implants (PSHA Implant). Balb/c 3T3 fibroblasts were used to asses the cytocompatibility of implant materials according to ISO-10993-5 protocols. Osteoblasts from Balb/c femurs seeded onto different implant surfaces showed the effect of surface topography and chemistry on cell adhesion. The results showed that all implants were not cytotoxic and that PSHA and AB/AE nanotite implants favored osteoblasts adhesion.

scholarly journals Micro/nano-textured hierarchical titanium topography promotes exosome biogenesis and secretion to improve osseointegration

2021 ◽  
Vol 19 (1) ◽  
Author(s):  
Zhengchuan Zhang ◽  
Ruogu Xu ◽  
Yang Yang ◽  
Chaoan Liang ◽  
Xiaolin Yu ◽  
...  
Keyword(s):  
Gene Expression ◽  
Titanium Surface ◽  
Titanium Implants ◽  
Extracellular Secretion ◽  
Exosome Biogenesis ◽  
Marrow Mesenchymal Stem Cells ◽  
Proliferation In Vitro ◽  
Extracellular Environment

Abstract Background Micro/nano-textured hierarchical titanium topography is more bioactive and biomimetic than smooth, micro-textured or nano-textured titanium topographies. Bone marrow mesenchymal stem cells (BMSCs) and exosomes derived from BMSCs play important roles in the osseointegration of titanium implants, but the effects and mechanisms of titanium topography on BMSCs-derived exosome secretion are still unclear. This study determined whether the secretion behavior of exosomes derived from BMSCs is differently affected by different titanium topographies both in vitro and in vivo. Results We found that both micro/nanonet-textured hierarchical titanium topography and micro/nanotube-textured hierarchical titanium topography showed favorable roughness and hydrophilicity. These two micro/nano-textured hierarchical titanium topographies enhanced the spreading areas of BMSCs on the titanium surface with stronger promotion of BMSCs proliferation in vitro. Compared to micro-textured titanium topography, micro/nano-textured hierarchical titanium topography significantly enhanced osseointegration in vivo and promoted BMSCs to synthesize and transport exosomes and then release these exosomes into the extracellular environment both in vitro and in vivo. Moreover, micro/nanonet-textured hierarchical titanium topography promoted exosome secretion by upregulating RAB27B and SMPD3 gene expression and micro/nanotube-textured hierarchical titanium topography promoted exosome secretion due to the strongest enhancement in cell proliferation. Conclusions These findings provide evidence that micro/nano-textured hierarchical titanium topography promotes exosome biogenesis and extracellular secretion for enhanced osseointegration. Our findings also highlight that the optimized titanium topography can increase exosome secretion from BMSCs, which may promote osseointegration of titanium implants.

Calcium Phosphate Coating on Blast-Treated Titanium Implants by RF Magnetron Sputtering

2009 ◽  
Vol 631-632 ◽  
pp. 211-216 ◽  
Author(s):  
Kyosuke Ueda ◽  
Takayuki Narushima ◽  
Takashi Goto ◽  
T. Katsube ◽  
Hironobu Nakagawa ◽  
...  
Keyword(s):  
Calcium Phosphate ◽  
Magnetron Sputtering ◽  
Bonding Strength ◽  
Rf Magnetron Sputtering ◽  
Titanium Implants ◽  
Calcium Phosphate Coating ◽  
Phosphate Coating ◽  
Coating Films

Calcium phosphate coating films were fabricated on Ti-6Al-4V plates and screw-type implants with a blast-treated surface using radiofrequency (RF) magnetron sputtering and were evaluated in vitro and in vivo. Amorphous calcium phosphate (ACP) and oxyapatite (OAp) films obtained in this study could cover the blast-treated substrate very efficiently, maintaining the surface roughness. For the in vitro evaluations of the calcium phosphate coating films, bonding strength and alkaline phosphatase (ALP) activity were examined. The bonding strength of the coating films to a blast-treated substrate exceeded 60 MPa, independent of film phases except for the film after post-heat-treatment in silica ampoule. When compared with an uncoated substrate, the increase in the ALP activity of osteoblastic SaOS-2 cells on a calcium phosphate coated substrate was confirmed by a cell culture test. The removal torque of screw-type Ti-6Al-4V implants with a blast-treated surface from the femur of Japanese white rabbit increased with the duration of implantation and it was statistically improved by coating an ACP film 2 weeks after implantation. The in vitro and in vivo studies suggested that the application of the sputtered ACP film as a coating on titanium implants was effective in improving their biocompatibility with bones.

Potential neurotoxicity of titanium implants: Prospective, in-vivo and in-vitro study

Biomaterials ◽  
2021 ◽  
pp. 121039
Author(s):  
Shahar Shelly ◽  
Sigal Liraz Zaltsman ◽  
Ofir Ben-Gal ◽  
Avraham Dayan ◽  
Ithamar Ganmore ◽  
...  
Keyword(s):  
In Vitro Study ◽  
Titanium Implants ◽  
Vitro Study

scholarly journals Effect of Titanium Implants Coated with Radiation-Crosslinked Collagen on Stability and Osseointegration in Rat Tibia

Materials ◽  
2018 ◽  
Vol 11 (12) ◽  
pp. 2520 ◽  
Author(s):  
Eun-Bin Bae ◽  
Ji-Hyun Yoo ◽  
Sung-In Jeong ◽  
Min-Su Kim ◽  
Youn-Mook Lim ◽  
...  
Keyword(s):  
Gamma Radiation ◽  
Human Mesenchymal Stem Cells ◽  
Region Of Interest ◽  
Bone Volume ◽  
Titanium Implants ◽  
Control Group ◽  
Gene Expressions ◽  
Significant Difference

This study aimed to evaluate the titanium (Ti) implants coated with collagen type Ⅰ crosslinked using gamma-irrigation or glutaraldehyde (GA). The in vitro surface observations, quantification assay, and cell studies using human mesenchymal stem cells (hMSCs) were conducted. For in vivo experiments, the implants were divided into three groups and inserted into the rat tibias: control group (non-treated Ti implant), GA group (Ti implants coated with GA-crosslinked collagen) and 25 kGy group (Ti implants coated with gamma-radiation-crosslinked collagen at dose of 25 kGy). The animals were sacrificed at 4 weeks after implantation and the tissue sections were obtained. New bone volume (mm3) and bone-to-implant contact (BIC, %) within the region of interest (ROI) was measured. The in vitro results showed the highest osteogenic differentiation and levels of osteogenesis-related gene expressions in the 25 kGy group without cytotoxicity. The new bone volume of GA group was significantly higher than the control (p < 0.05). In the result of the BIC, the 25 kGy group was significantly higher than the control (p < 0.05). However, there was no significant difference between the experimental groups. Within the limitations of this study, Ti implant coated with gamma-radiation-crosslinked collagen has potential utility without side effects from chemical agents.

scholarly journals Chitosan-miRNA functionalized microporous titanium oxide surfaces via a layer-by-layer approach with a sustained release profile for enhanced osteogenic activity

2020 ◽  
Vol 18 (1) ◽  
Author(s):  
Kaimin Wu ◽  
Mengyuan Liu ◽  
Nan Li ◽  
Li Zhang ◽  
Fanhui Meng ◽  
...  
Keyword(s):  
Sustained Release ◽  
Osteogenic Differentiation ◽  
Sodium Hyaluronate ◽  
Release Profile ◽  
Titanium Implants ◽  
Layer By Layer ◽  
Matrix Mineralization ◽  
In Vitro Transfection

Abstract Background The biofunctionalization of titanium implants for high osteogenic ability is a promising approach for the development of advanced implants to promote osseointegration, especially in compromised bone conditions. In this study, polyelectrolyte multilayers (PEMs) were fabricated using the layer-by-layer approach with a chitosan-miRNA (CS-miRNA) complex and sodium hyaluronate (HA) as the positively and negatively charged polyelectrolytes on microarc-oxidized (MAO) Ti surfaces via silane-glutaraldehyde coupling. Methods Dynamic contact angle and scanning electron microscopy measurements were conducted to monitor the layer accumulation. RiboGreen was used to quantify the miRNA loading and release profile in phosphate-buffered saline. The in vitro transfection efficiency and the cytotoxicity were investigated after seeding mesenchymal stem cells (MSCs) on the CS-antimiR-138/HA PEM-functionalized microporous Ti surface. The in vitro osteogenic differentiation of the MSCs and the in vivo osseointegration were also evaluated. Results The surface wettability alternately changed during the formation of PEMs. The CS-miRNA nanoparticles were distributed evenly across the MAO surface. The miRNA loading increased with increasing bilayer number. More importantly, a sustained miRNA release was obtained over a timeframe of approximately 2 weeks. In vitro transfection revealed that the CS-antimiR-138 nanoparticles were taken up efficiently by the cells and caused significant knockdown of miR-138 without showing significant cytotoxicity. The CS-antimiR-138/HA PEM surface enhanced the osteogenic differentiation of MSCs in terms of enhanced alkaline phosphatase, collagen production and extracellular matrix mineralization. Substantially enhanced in vivo osseointegration was observed in the rat model. Conclusions The findings demonstrated that the novel CS-antimiR-138/HA PEM-functionalized microporous Ti implant exhibited sustained release of CS-antimiR-138, and notably enhanced the in vitro osteogenic differentiation of MSCs and in vivo osseointegration. This novel miRNA-functionalized Ti implant may be used in the clinical setting to allow for more effective and robust osseointegration.

scholarly journals Biocompatible Organic Coatings Based on Bisphosphonic Acid RGD-Derivatives for PEO-Modified Titanium Implants

Molecules ◽  
2020 ◽  
Vol 25 (1) ◽  
pp. 229 ◽  
Author(s):  
Lyudmila V. Parfenova ◽  
Elena S. Lukina ◽  
Zulfia R. Galimshina ◽  
Guzel U. Gil’fanova ◽  
Veta R. Mukaeva ◽  
...  
Keyword(s):  
Titanium Implants ◽  
Biologically Active ◽  
Hybrid Molecules ◽  
Electrolytic Oxidation ◽  
Coated Surface ◽  
Plasma Electrolytic ◽  
Chemical Cross Linking ◽  
Significant Attention

Currently, significant attention is attracted to the problem of the development of the specific architecture and composition of the surface layer in order to control the biocompatibility of implants made of titanium and its alloys. The titanium surface properties can be tuned both by creating an inorganic sublayer with the desired morphology and by organic top coating contributing to bioactivity. In this work, we developed a composite biologically active coatings based on hybrid molecules obtained by chemical cross-linking of amino acid bisphosphonates with a linear tripeptide RGD, in combination with inorganic porous sublayer created on titanium by plasma electrolytic oxidation (PEO). After the addition of organic molecules, the PEO coated surface gets nobler, but corrosion currents increase. In vitro studies on proliferation and viability of fibroblasts, mesenchymal stem cells and osteoblast-like cells showed the significant dependence of the molecule bioactivity on the structure of bisphosphonate anchor and the linker. Several RGD-modified bisphosphonates of β-alanine, γ-aminobutyric and ε-aminocaproic acids with BMPS or SMCC linkers can be recommended as promising candidates for further in vivo research.

Formation and In Vitro and In Vivo Evaluation of Surface Modified Implants by HAp, Carbonated-HAp and Titanium Oxide

2007 ◽  
Vol 539-543 ◽  
pp. 687-691 ◽  
Author(s):  
Masazumi Okido ◽  
Ryoichi Ichino ◽  
Kotaro Kuroda
Keyword(s):  
Titanium Oxide ◽  
Titanium Implant ◽  
Titanium Implants ◽  
Contact Ratio ◽  
In Vivo Evaluation ◽  
Ft Ir ◽  
Mouse Osteoblast ◽  
Surface Modified

Hydroxyapatite (Ca10(PO4)6(OH)2, HAp), carbonated HAp and titanium oxide are of interest for bone-interfacing implant applications, because of their demonstrated osteoconductive properties. They were coated on the titanium implants and investigated the in vitro and in vivo performance. HAp coatings were performed by the thermal substrate method in aqueous solutions. Titanium oxide film was also formed on the titanium implants by gaseous oxidation, or by anodizing in the acidic solution. All the specimens covered with HAp, carbonated HAp or TiO2 (rutile or anatase). were characterized by XRD, EDX, FT-IR and SEM. In the in vitro testing, the mouse osteoblast-like cells (MC3T3-E1) were cultured on the coated and non-coated specimens for up to 30 days. Moreover, the osseointegration was evaluated from the rod specimens implanted in rats femoral for up to 8 weeks. In in vivo evaluations two weeks postimplantation, new bone formed on the coated and non-coated titanium rods in the cancellous bone and cortical bone, respectively. Bone-implant contact ratio, in order to evaluate of new bone formation, was significantly depended on the compound formed on the titanium implant.

Sign in / Sign up

Export Citation Format

Share Document