scholarly journals Realization of visible light integrated circuits for all-optical haar transform

2021 ◽  
Vol 53 (7) ◽  
Author(s):  
Ali Azimi Fashi ◽  
M. H. Vadjed Samiei ◽  
Antonio Teixeira
2021 ◽  
Author(s):  
Ali Azimi Fashi ◽  
Mohammad Hashem Vadjed Samiei ◽  
Antonio Teixeira

Abstract Photonic integrated circuits have been designed, simulated and tested on TriPleXTM platform technology for implementing optical Haar Transform (HT) in the visible spectrum. Optical circuits contain the new building block (BB) designed using the multimode interference (MMI) structure performing optical HT on a pair of the optical signals. The Outputs of the BB demonstrates the sum and subtraction of the input signals according to the HT operation. 1st-order and 2nd-order optical HT achieved for the green light input signals. Simulation and experimental results have successfully validated designed photonic circuits capability in implementing optical HT.


Crystals ◽  
2019 ◽  
Vol 9 (9) ◽  
pp. 461 ◽  
Author(s):  
Mohammad Reza Jalali Azizpour ◽  
Mohammad Soroosh ◽  
Narges Dalvand ◽  
Yousef Seifi-Kavian

In this paper, an all-optical photonic crystal-based switch containing a graphene resonant ring has been presented. The structure has been composed of 15 × 15 silicon rods for a fundamental lattice. Then, a resonant ring including 9 thick silicon rods and 24 graphene-SiO2 rods was placed between two waveguides. The thick rods with a radius of 0.41a in the form of a 3 × 3 lattice were placed at the center of the ring. Graphene-SiO2 rods with a radius of 0.2a were assumed around the thick rods. These rods were made of the graphene monolayers which were separated by SiO2 disks. The size of the structure was about 70 µm2 that was more compact than other works. Furthermore, the rise and fall times were obtained by 0.3 ps and 0.4 ps, respectively, which were less than other reports. Besides, the amount of the contrast ratio (the difference between the margin values for logics 1 and 0) for the proposed structure was calculated by about 82%. The correct switching operation, compactness, and ultra-fast response, as well as the high contrast ratio, make the presented switch for optical integrated circuits.


2018 ◽  
Author(s):  
Suseendran Jayachandran ◽  
Silvia Lenci ◽  
Kristof Lodewijks ◽  
Tangla David Kongnyuy ◽  
Kenny Leyssens ◽  
...  

2018 ◽  
Vol 32 (02) ◽  
pp. 1850008 ◽  
Author(s):  
Luna Cui ◽  
Li Yu

Nano-scale Multifunctional Logic Gates based on Si hybrid plasmonic waveguides (HPWGs) are designed by utilizing the multimode interference (MMI) effect. The proposed device is composed of three input waveguides, three output waveguides and an MMI waveguide. The functional size of the device is only 1000 nm × 3200 nm, which is much smaller than traditional Si-based all-optical logic gates. By setting different input signals and selecting suitable threshold value, OR, AND, XOR and NOT gates are achieved simultaneously or individually in a single device. This may provide a way for ultrahigh speed signal processing and future nanophotonic integrated circuits.


2021 ◽  
Author(s):  
Ipshitha Charles ◽  
Alluru Sreev ◽  
SabbiVamshi Krishna ◽  
Sandip Swarnakar ◽  
Santosh Kumar

Abstract In this digital era, all-optical logic gates (OLGs) proved its effectiveness in execution of high-speed computations. A unique construction of an all-optical OR, NOR, NAND gates based on the notion of power combiner employing metal–insulator–metal (MIM) waveguide in the Y-shape in a minimal imprint of 6.2 µm × 3 µm is presented and the structure is evaluated by finite-difference time-domain (FDTD) technique. The insertion loss (IL) and extinction-ratio (ER) for proposed model are 6 dB and 27.76 dB for NAND gate, 2 dB and 20.35 dB for NOR gate and 6 dB and 24.10 dB respectively. The simplified model is used in the construction of complex circuits to achieve greater efficiency, which contributes to the emergence of a new technique for designing plasmonic integrated circuits.


Sign in / Sign up

Export Citation Format

Share Document