Effect of Titanium Addition on Alumina Growth Mechanism on Yttria-Containing FeCrAl-Base Alloy

2018 ◽  
Vol 90 (5-6) ◽  
pp. 671-690 ◽  
Author(s):  
Taihong Huang ◽  
Dmitry Naumenko ◽  
Peng Song ◽  
Jiansheng Lu ◽  
Willem Joseph Quadakkers
Keyword(s):  
Growth Mechanism ◽  
Base Alloy ◽  
Titanium Addition

Effect of Alloying Modification in Arc Melted Hastelloy X on Microstructures and Oxidation Resistance at Elevated Temperatures

2015 ◽  
Vol 658 ◽  
pp. 8-13
Author(s):  
Pajaree Srigiofun ◽  
Panyawat Wangyao ◽  
Tanaporn Rojhirunsakool
Keyword(s):  
Oxidation Resistance ◽  
Elevated Temperatures ◽  
Base Alloy ◽  
Research Work ◽  
Intermetallic Phase ◽  
Melting Furnace ◽  
Vacuum Arc ◽  
Titanium Addition ◽  
Hastelloy X ◽  
Arc Melting

The present research work has an aim to modify microstructure and oxidation behavior of Hastelloy X, a solid solution nickel base alloy, by both aluminium and titanium additions by mean of arc melting process. The Hastelloy X was added both Al and Ti (50:50) for 2% 4% and 6% by weight and casted by vacuum arc melting furnace. Then all received specimens were performed heat treatment, which consist of solutioning treatment at 1175°C for 4 hours and aging temperatures for 760°C, 800°C and 845°C for 24 hours. From the obtained results, it was found that the amount of both Al and Ti additions as well as precipitation aging temperature provided significant effect on both final microstructure and oxidation behaviors at 900°C and 1000°C. Widmanstatten type of microstructure was found in many case. Intermetallic phase formation of molybdenum and chromium was also found in all cases by element mapping. This phase should be γ’-phase. Both aluminium and titanium additions could not provide beneficial effect on oxidation resistance tests at temperature of 900°C and 1000°C. However, with 4%wt. of both aluminium and titanium addition, it resulted in slightly increasing of oxidation resistance at temperature of 1000°C

Control of Metal Alloy Oxidation with Electric Fields

1973 ◽  
Vol 31 ◽  
pp. 164-165
Author(s):  
R. R. Dils ◽  
P. S. Follansbee
Keyword(s):  
Electric Fields ◽  
Oxidation Process ◽  
Base Alloy ◽  
Oxide Surface ◽  
Platinum Electrodes ◽  
Insulating Layer ◽  
Iron Base Alloy ◽  
Alloy Oxidation ◽  
Aluminum Oxide Layer ◽  
And Control

Electric fields have been applied across oxides growing on a high temperature alloy and control of the oxidation of the material has been demonstrated. At present, three-fold increases in the oxidation rate have been measured in accelerating fields and the oxidation process has been completely stopped in a retarding field.The experiments have been conducted with an iron-base alloy, Pe 25Cr 5A1 0.1Y, although, in principle, any alloy capable of forming an adherent aluminum oxide layer during oxidation can be used. A specimen is polished and oxidized to produce a thin, uniform insulating layer on one surface. Three platinum electrodes are sputtered on the oxide surface and the specimen is reoxidized.

Suppression of γ’ Precipitation in a Laser-Melted Nickel-Base Alloy

1977 ◽  
Vol 35 ◽  
pp. 270-271
Author(s):  
J. M. Walsh ◽  
J. C. Whittles ◽  
B. H. Kear ◽  
E. M. Breinan
Keyword(s):  
Cooling Rate ◽  
Base Alloy ◽  
Material Surface ◽  
Intimate Contact ◽  
Absorbed Power ◽  
Perfect Contact ◽  
Nickel Base ◽  
Rapidly Solidified ◽  
Limiting Case ◽  
The Heat Transfer Coefficient

Conventionally cast γ’ precipitation hardened nickel-base superalloys possess well-defined dendritic structures and normally exhibit pronounced segregation. Splat quenched, or rapidly solidified alloys, on the other hand, show little or no evidence for phase decomposition and markedly reduced segregation. In what follows, it is shown that comparable results have been obtained in superalloys processed by the LASERGLAZE™ method.In laser glazing, a sharply focused laser beam is traversed across the material surface at a rate that induces surface localized melting, while avoiding significant surface vaporization. Under these conditions, computations of the average cooling rate can be made with confidence, since intimate contact between the melt and the self-substrate ensures that the heat transfer coefficient is reproducibly constant (h=∞ for perfect contact) in contrast to the variable h characteristic of splat quenching. Results of such computations for pure nickel are presented in Fig. 1, which shows that there is a maximum cooling rate for a given absorbed power density, corresponding to the limiting case in which melt depth approaches zero.

The Nature of Delta Phase Precipitation in Inconel 718

1982 ◽  
Vol 40 ◽  
pp. 724-725
Author(s):  
L. S. Lin ◽  
C. C. Law
Keyword(s):  
Inconel 718 ◽  
Base Alloy ◽  
High Strength ◽  
Physical Metallurgy ◽  
Nickel Base Alloy ◽  
Phase Precipitation ◽  
Weight Percentage ◽  
Delta Phase ◽  
The Subject ◽  
Nickel Base

Inconel 718, a precipitation hardenable nickel-base alloy, is a versatile high strength, weldable wrought alloy that is used in the gas turbine industry for components operated at temperatures up to about 1300°F. The nominal chemical composition is 0.6A1-0.9Ti-19.OCr-18.0Fe-3Mo-5.2(Cb + Ta)- 0.1C with the balance Ni (in weight percentage). The physical metallurgy of IN 718 has been the subject of a number of investigations and it is now established that hardening is due, primarily, to the formation of metastable, disc-shaped γ" an ordered body-centered tetragonal structure (DO2 2 type superlattice).

Montmorillonite Dendrites

1974 ◽  
Vol 32 ◽  
pp. 454-455
Author(s):  
Necip Güven ◽  
Rodney W. Pease
Keyword(s):  
Crystal Growth ◽  
Growth Mechanism ◽  
Growth Front ◽  
Morphological Features ◽  
Dendritic Crystal ◽  
Crystal Growth Mechanism

Morphological features of montmorillonite aggregates in a large number of samples suggest that they may be formed by a dendritic crystal growth mechanism (i.e., tree-like growth by branching of a growth front).

Structural phenomena in the growth of carbon nanotubes

1993 ◽  
Vol 51 ◽  
pp. 750-751
Author(s):  
Jun Jiao
Keyword(s):  
Carbon Nanotubes ◽  
Growth Mechanism ◽  
Carbonaceous Material ◽  
Cluster Growth ◽  
Structural Elements ◽  
Rich Variety ◽  
Different Shapes ◽  
Point To Point

HREM studies of the carbonaceous material deposited on the cathode of a Huffman-Krätschmer arc reactor have shown a rich variety of multiple-walled nano-clusters of different shapes and forms. The preparation of the samples, as well as the variety of cluster shapes, including triangular, rhombohedral and pentagonal projections, are described elsewhere.The close registry imposed on the nanotubes, focuses attention on the cluster growth mechanism. The strict parallelism in the graphitic separation of the tube walls is maintained through changes of form and size, often leading to 180° turns, and accommodating neighboring clusters and defects. Iijima et. al. have proposed a growth scheme in terms of pentagonal and heptagonal defects and their combinations in a hexagonal graphitic matrix, the first bending the surface inward, and the second outward. We report here HREM observations that support Iijima’s suggestions, and add some new features that refine the interpretation of the growth mechanism. The structural elements of our observations are briefly summarized in the following four micrographs, taken in a Hitachi H-8100 TEM operating at an accelerating voltage of 200 kV and with a point-to-point resolution of 0.20 nm.

Synthesis, performance and growth mechanism of silver nanoparticle coated SERS fiber probe

2019 ◽  
Vol 107 (3) ◽  
pp. 305
Author(s):  
Mengmei Geng ◽  
Yuting Long ◽  
Tongqing Liu ◽  
Zijuan Du ◽  
Hong Li ◽  
...  
Keyword(s):  
Silver Nanoparticles ◽  
Absorption Spectrum ◽  
Reaction Time ◽  
Growth Mechanism ◽  
Fiber Optic ◽  
Fiber Optic Probe ◽  
Visible Absorption ◽  
Fiber Probe ◽  
Surface Enhanced Raman ◽  
Optic Probe

Surface-enhanced Raman Scattering (SERS) fiber probe provides abundant interaction area between light and materials, permits detection within limited space and is especially useful for remote or in situ detection. A silver decorated SERS fiber optic probe was prepared by hydrothermal method. This method manages to accomplish the growth of silver nanoparticles and its adherence on fiber optic tip within one step, simplifying the synthetic procedure. The effects of reaction time on phase composition, surface plasmon resonance property and morphology were investigated by X-ray diffraction analysis (XRD), ultraviolet-visible absorption spectrum (UV-VIS absorption spectrum) and scanning electron microscope (SEM). The results showed that when reaction time is prolonged from 4–8 hours at 180 °C, crystals size and size distribution of silver nanoparticles increase. Furthermore, the morphology, crystal size and distribution density of silver nanoparticles evolve along with reaction time. A growth mechanism based on two factors, equilibrium between nucleation and growth, and the existence of PVP, is hypothesized. The SERS fiber probe can detect rhodamin 6G (R6G) at the concentration of 10−6 M. This SERS fiber probe exhibits promising potential in organic dye and pesticide residue detection.

Sign in / Sign up

Export Citation Format

Share Document