Low-Cost Filtration System to Treat First-Flush Stormwater

2009 ◽  
Vol 9 (5-6) ◽  
pp. 347-355 ◽  
Author(s):  
B. Kus ◽  
J. Kandasamy
Author(s):  
Eldon R. Rene ◽  
Shishir Kumar Behera ◽  
Hung Suck Park

Engineered floodplain filtration (EFF) system is an eco-friendly low-cost water treatment process wherein water contaminants can be removed, by adsorption and-or degraded by microorganisms, as the infiltrating water moves from the wastewater treatment plants to the rivers. An artificial neural network (ANN) based approach was used in this study to approximate and interpret the complex input/output relationships, essentially to understand the breakthrough times in EFF. The input parameters to the ANN model were inlet concentration of a pharmaceutical, ibuprofen (ppm) and flow rate (md– 1), and the output parameters were six concentration-time pairs (C, t). These C, t pairs were the times in the breakthrough profile, when 1%, 5%, 25%, 50%, 75%, and 95% of the pollutant was present at the outlet of the system. The most dependable condition for the network was selected by a trial and error approach and by estimating the determination coefficient (R2) value (>0.99) achieved during prediction of the testing set. The proposed ANN model for EFF operation could be used as a potential alternative for knowledge-based models through proper training and testing of variables.


2020 ◽  
Vol 699 ◽  
pp. 134267 ◽  
Author(s):  
Thi Hai Nguyen ◽  
Hai Nguyen Tran ◽  
Hai Anh Vu ◽  
Minh Viet Trinh ◽  
Tien Vinh Nguyen ◽  
...  
Keyword(s):  
Low Cost ◽  

2018 ◽  
Author(s):  
Edison E. Mojica ◽  
Ar-Ar S. Ardaniel ◽  
Jeanlou G. Leguid ◽  
Andrea T. Loyola

2012 ◽  
Vol 51 (11) ◽  
pp. 3476-3481 ◽  
Author(s):  
Md Shafiq Alam ◽  
D. K. Sharma ◽  
V. K. Sehgal ◽  
M. Arora ◽  
S. Bhatia
Keyword(s):  
Low Cost ◽  

2020 ◽  
Vol 55 (3) ◽  
pp. 234-248
Author(s):  
Arundhati Pillai ◽  
M. Amin F. Zarandi ◽  
Faten B. Hussein ◽  
Krishna M. Pillai ◽  
Nidal H. Abu-Zahra

Abstract Arsenic contamination of water sources is a global problem, affecting numerous (especially developing) countries across the world. Exposure to exorbitantly high concentrations reaching 400 parts per billion of arsenic in water sources lead to numerous health complications, including the development of respiratory, neurological, and cancerous diseases. This study focused on developing an innovative, low-cost, and gravity-driven filtration system using a novel iron oxide nanoparticle-loaded polyurethane (PU) foam by which people in developing countries may have easy access to an effective, affordable, and easily fabricated filtration system. After successfully synthesizing the new iron oxide nanoparticle-loaded PU foam, effectiveness of the foam was tested by developing a filtration system consisting of vertical polyvinyl-chloride tubing inserted with 10 and 20 cm of PU foams. Samples of arsenic-contaminated water with known concentrations of 100 and 200 ppb were run through each of the systems numerous times for one and five run cases. The system with 20 cm of PU foam and five runs successfully filtered out around 50–70% of the arsenic from the 100 and 200 ppm samples. The filtration process was quite fast (and hence practical) with each run completing in 5–10 minutes' time. Future research is expected to improve this promising start.


Author(s):  
Angela Raffaella Pia Pizzichetti ◽  
Cristina Pablos ◽  
Carmen Álvarez-Fernández ◽  
Ken Reynolds ◽  
Simon Stanley ◽  
...  
Keyword(s):  
Low Cost ◽  

2016 ◽  
Vol 2 (0) ◽  
pp. 5
Author(s):  
Tajuddin Sikder ◽  
Zakir Hossain ◽  
Priangka Bhattacharya Pingki ◽  
Jussi Dayna Biswas ◽  
Mostafizur Rahman ◽  
...  
Keyword(s):  
Low Cost ◽  

2020 ◽  
Vol 10 (22) ◽  
pp. 8111
Author(s):  
Dongwhi Lee ◽  
Yun Jeong Cha ◽  
Youngbin Baek ◽  
Shin Sik Choi ◽  
Yunho Lee

Gravity-driven membrane (GDM) filtration is one of the promising technologies for decentralized water treatment systems due to its low cost, simple operation, and convenient maintenance. The objective of this study was to evaluate the permeability of submerged GDM filtration with three different membranes, i.e., polyethersulfone and polyvinylidene difluoride ultrafiltration (PES-UF and PVDF-UF) and polytetrafluoroethylene microfiltration membrane (PTFE-MF). The GDM system was operated using lake water for about one year. The determined average permeability values were high for PVDF-UF (192.9 L/m2/h/bar (LMH/bar)) and PTFE-MF (80.6 LMH/bar) and relatively lower for PES-UF (46.1 LMH/bar). The observed higher permeability for PVDF-UF and PTFE-MF was thought to be related to the rougher surface of these two membranes compared to PES-UF. The fouling layers of PVDF-UF and PTFE-MF were characterized by high biomass and the presence of a number of nematodes, while PES-UF showed a thin fouling layer with no nematode. The relatively high and fluctuated permeability of PVDF-UF and PTFE-MF could thus be attributed to the high biological activity of nematodes making the fouling layer more loose and porous. This was supported by a good linear relationship among the permeability, biomass concentration, and the number of nematodes in the fouling layers. These results provide important insights into membrane selection as a critical factor affecting the flux performance of the GDM filtration system for a decentralized drinking water supply.


Energies ◽  
2020 ◽  
Vol 13 (5) ◽  
pp. 1064 ◽  
Author(s):  
Ewa Knapik ◽  
Katarzyna Chruszcz-Lipska ◽  
Jerzy Stopa ◽  
Marta Marszałek ◽  
Agnieszka Makara

Oily brine from the gas and oil industries remains the most difficult wastewater to treat due to its complex chemical composition, which includes aromatic hydrocarbons. Even at low concentrations, the presence of BTX (benzene, toluene, xylenes) can be extremely harmful to aquatic ecosystems. Fixed-bed adsorption columns are recommended for oily water treatment due to their flexibility and easy operation. In this research, pine sawdust modified with polydimethysiloxane (PDMS) and hydrophobic nanosilica was applied as a sorbent in a filtration system. The surface modification of raw fiber allowed to change its morphology and increase the roughness of it. The Yoon–Nelson, Bohart–Adams, Clark, and Belter models were applied to simulate continuous biosorption. The Bohart–Adams model strongly correlated with the experimental data and described the whole dynamic behavior of the column. The effect of feed flow rate (10–50 mL/min) on breakthrough characteristics was determined. Both the breakthrough and saturation time decreased as the flow rate increased. This study indicated that hydrophobized pine sawdust is an effective low-cost potential biosorbent for the removal of BTX fraction from produced water in continuous column mode.


Sign in / Sign up

Export Citation Format

Share Document